SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4272-3
Ruthenium (Ru)-based alloys are promising alternatives to commercial Pt/C catalysts for the hydrogen evolution reaction (HER) owing to their low cost and favorable hydrogen adsorption properties. However, the sluggish water dissociation on Ru catalysts remains a major kinetic bottleneck in alkaline solutions. Herein, we report a rare earth (RE) dilute alloy strategy by incorporating a trace amount of cerium (Ce, ~1 at%) into a RuCu alloy to promote interfacial water activation. The oxophilic Ce sites strengthen H2O adsorption and reduce the energy barrier for water dissociation, thereby accelerating the Volmer step during alkaline hydrogen evolution. Consequently, the RuCuCe catalyst delivers 10 mA cm−2 at an overpotential of only 18 mV in 1.0 M KOH and maintains stable operation for over 100 h at 500 mA cm−2 in a membrane electrode assembly. In situ electrochemical impedance spectroscopy and pH-dependent measurements verify the facilitated Volmer process induced by Ce incorporation. Temperature-dependent analysis further shows that the apparent activation energy decreases from 47.4 kJ mol−1 for RuCu to 26.4 kJ mol−1 for RuCuCe, consistent with enhanced water dissociation kinetics. This work establishes RE dilute metal alloys as an effective platform for boosting the intrinsic activity of Ru-based alloy catalysts, in which RE incorporation promotes water dissociation while inducing charge redistribution in the alloy matrix.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4262-7
The escalating demands of artificial intelligence, machine learning, and neural computing necessitate multifunctional optoelectronic devices capable of integrating sensing, memory, and processing. Two-dimensional van der Waals heterostructures (vdWHs) offer unique advantages, yet their practical deployment is hindered by complex architectures and inefficient mode-switching. Here, we demonstrate a MoTe2/SnS2 anti-ambipolar heterojunction device enabling single-gate reconfiguration among frequency doubling, broadband photodetection, and neuromorphic computing. The device exhibits a peak-to-valley ratio (PVR) of 465, ensuring efficient frequency doubling. As a photodetector, it operates across an exceptionally broad spectral range of 520–2200 nm, with outstanding responsivity and detectivity. Furthermore, the device emulates complete synaptic behaviors, including short-term plasticity (STP), long-term plasticity (LTP), and paired-pulse facilitation (PPF). Integrated into a reservoir computing (RC) system trained on a vehicle motion dataset, it achieves a directional recognition accuracy of 98.7%. This work establishes a paradigm for multifunctional integration and low-power neuromorphic computing, advancing next-generation intelligent optoelectronic systems.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509001
To address low nitrogen removal efficiency in wastewater treatment plant (WWTP) effluent due to insufficient carbon sources and weak reoxygenation in conventional constructed wetlands (CWs), a tidal flow-subsurface flow integrated CW using iron-loaded biochar (BC-TF) as substrate was developed, with zeolite-based CW as control. Simulated wastewater experiments, water quality monitoring, nitrification/denitrification intensity assays, and high-throughput sequencing were employed. Results showed that tidal flow operation significantly enhanced removal of total nitrogen (TN) and ammonia nitrogen (NH4+-N), and increased nitrification intensity. Addition of iron-loaded biochar significantly improved TN and nitrate nitrogen (NO3−-N) removal, with BC-TF achieving an average TN removal of 86.03%, significantly higher than other groups (P<0.001). Microbial analysis revealed Proteobacteria, Actinobacteria, and Bacteroidetes as key phyla; iron-loaded biochar increased microbial abundance and diversity in tidal flow wetlands, while tidal flow alone reduced bacterial diversity. Pilot-scale experiments confirmed that tidal flow increased dissolved oxygen and nitrogen removal. This study is the first to combine iron-loaded biochar with tidal flow-subsurface flow CWs, systematically revealing the synergistic nitrogen removal mechanism of 'iron-loaded biochar-tidal flow-microorganisms', clarifying the role of iron-nitrogen coupling, and validating engineering applicability via pilot tests. The combination enhances reoxygenation, supplements carbon sources, and optimizes microbial community structure, effectively improving deep nitrogen purification of WWTP effluent, providing technical reference for tailwater treatment.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202606005
In the context of carbon peaking and carbon neutrality, urban reclaimed water plants must adopt measures such as energy conservation, consumption reduction, and enhanced resource and energy utilization to achieve carbon neutrality. This study developed a carbon emission balance model and accounting method for such plants, incorporating strategies of carbon emission reduction, carbon substitution, and carbon sink. The optimal pathway towards carbon neutrality was evaluated based on the carbon emission balance ratio. Using a 1×10⁵ m³/d urban reclaimed water plant as a case study, the results showed total carbon emissions of 20,934 t CO2e. The carbon emission reduction from reclaimed water source heat pumps for heating and cooling was 21,701 t CO2e, yielding a carbon emission balance ratio of 103.7%. In contrast, other carbon reduction measures contributed 15,424 t CO2e, with a balance ratio of 73.7%, highlighting the pivotal role of reclaimed water source heat pumps. When the heat pump extracted 27% and 36% of residual thermal energy, coupled with reclaimed water reuse or sludge anaerobic digestion-cogeneration, respectively, both pathways achieved a 100% balance ratio. Assuming year-round extraction, the balance ratio reached 213%. The carbon reduction ratio between utilizing residual thermal energy and chemical energy was 8.76:1. This study demonstrates that urban reclaimed water plants can achieve carbon neutrality through multiple pathways, with residual thermal energy recovery exhibiting significant potential.