SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4395-x
Electrocatalysts in lithium–sulfur (Li–S) batteries accelerate sulfur species redox reactions and restrict polysulfide shuttling, yet ideal electrocatalysts with remarkable bidirectional catalytic effects remain scarce. This work utilizes iron (Fe) to trigger bidirectional catalytic effects in a cobalt (Co) electrocatalyst, generating a metal alloy-based heterostructure of Co-Co7Fe3 dispersed homogeneously on carbon sheets (Co-Co7Fe3/CS). Electrochemical tests and in situ X-ray diffraction disclose significantly enhanced bilateral catalytic activity of Co-Co7Fe3 compared to bare Co, confirmed by self-discharge measurements. Post-cycling investigation validates protection of the Li metal anode from sulfur species corrosion. The Co-Co7Fe3/CS-modified coin cells deliver an exceptional rate capability of 603 mAh g–1 at 5.0 C and steady long-life cycling for 500 cycles at 1.0 and 2.0 C. Under high sulfur loadings and lean electrolyte conditions, an impressive areal capacity with stable cycling is realized. This work provides valuable insights for designing metal alloy-based heterostructures as advanced electrocatalysts in Li–S batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4114-5
The precise and controllable synthesis of one-dimensional (1D) and two-dimensional (2D) heterostructures, coupled with the manipulation of their atomic and electronic configurations, is of paramount significance. However, due to the synthetic challenges associated with graphyne (GY) materials, their integration into 1D/2D heterostructures remains considerably difficult. Herein, we demonstrate a post-synthetic intercalation strategy for tellurium onto Ag(111), enabling the controllable fabrication of 1D-GY-nanowire/2D-AgTe-monolayers heterostructures. Scanning-probe microscopies are employed to characterize morphological evolution during the intercalation process. Scanning tunneling spectroscopy results confirm that AgTe monolayer intercalation induces interfacial decoupling of the graphyne nanowires. Density functional theory calculations demonstrate that work function-driven Fermi level modulation via interfacial charge engineering assigns the 1D-GY-nanowire/2D-AgTe-monolayers heterostructures as type-I heterostructures. Our work not only significantly advances the fundamental understanding of interfacial interactions in 1D/2D heterostructures but also presents a scalable strategy for designing heterostructures with tailored electronic functionalities, thereby opening new avenues for applications in advanced nanoelectronics and optoelectronic devices.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3559-5
Polyamide (PA) membranes are promising for lithium extraction from spent lithium-ion battery (LIB) leachate but face a trade-off between selectivity and permeability. Here, we demonstrate that nascent PA membranes post-grafted with triaminoguanidinium (TAG) monomers (PA-TAG membranes) gain expanded ion passage channels (0.8–7.1 Å) and enhanced positive charge, achieving high-performance lithium separation. The PA-TAG membrane exhibits a pure water permeance (PWP) of 15.5 L m−2 h−1 bar−1, superior divalent ion rejection (~98%), and an excellent separation factor (~30), significantly outperforming pristine PA membranes. In a simulated acidic battery leachate, the PA-TAG membrane achieved a relative volumetric lithium recovery rate of 48.2% after a two-stage nanofiltration process, with the Li+/M2+ mass ratio of the second permeate reaching 53.35, 445 times that of the feed (0.12). The membrane maintained stable performance over 45 hours of nanofiltration and resisted acidic conditions (pH=2) for at least 20 days. These results highlight the potential of PA-TAG membranes for efficient lithium extraction from acidic battery leachate, addressing the critical need for sustainable recycling of spent LIBs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3682-6
Metal single-atoms with optimized coordination structure on highly accessible substrate can maximize the metal utilization efficiency along with enhancing catalytic activities. Herein, axial nitrogen-coordinated Fe-N5 sites on N-doped carbon (denoted as FeN5@N-C) hollow microplates are fabricated via a unique Fe3+-chelated polydopamine assisted hollowing strategy using ZIF-L microplates as multifunctional templates. Due to the powerful chelating and adhesive ability of polydopamine, this hollow-carbon strategy can be extended to fabricate single-atom Fe-N-C hollow structures with different shapes and encapsulate other transition-metal single atoms (Ni, Co, Mn, and Cu) into the N-doped carbon hollow microplates. The FeN5@N-C hollow microplates exhibit outstanding oxygen reduction reaction (ORR) capability with an impressive half-wave potential of 0.93 V vs. reversible hydrogen electrode and high stability, which can serve as air-cathode catalysts for high-performance Zn-air batteries with high peak power density of 225.3 mW cm−2 and stable cyclability of up to 400 h. Comprehensive analysis and theoretical calculations elucidate that axial nitrogen coordination in Fe-N5 catalytic sites, unlike the planar Fe-N4 configuration, can compete well with the bonding of OH* through additional 3d-2p orbital hybridization, thereby giving moderate bonding strength to enhance the ORR activity.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3598-1
Embedding a dielectric layer between as-synthesized graphene nanoribbons (GNRs) and metal surfaces represents a powerful strategy to achieve electronic decoupling, thereby enabling the extraction of these ribbons' intrinsic electrical properties. Although several reports have documented dielectric intercalation between GNRs and metal substrates, studies on Ag(111) substrates are limited. Here, we demonstrate a semiconducting AgTe monolayer intercalation method to achieve electronic decoupling between as-synthesized GNRs and an Ag(111) substrate. Using low-temperature scanning tunneling microscopy, we directly observed the AgTe intercalation process at the GNR/Ag(111) interface. By combining scanning tunneling spectroscopy and density functional theory calculations, we elucidate the critical role of AgTe monolayer intercalation in reducing the interaction between as-synthesized GNRs and the Ag(111) substrate and observe the near-intrinsic electrical properties of the GNRs. Our findings offer a practical and effective strategy for intercalating AgTe monolayers between carbon-based nanomaterials and Ag(111) substrates, facilitating the unambiguous characterization of the near-intrinsic electronic properties of these materials.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604012
A newly constructed wastewater treatment plant with a design capacity of 100,000 m3/d receives influent containing approximately 15% industrial wastewater, resulting in water quality and quantity fluctuation coefficients of 1.2–1.5, refractory organic matter (as COD) exceeding 35% of total COD, and a total nitrogen (TN) concentration up to 55 mg/L. To ensure stable effluent compliance and enhance shock resistance, a modified Bardenpho process was implemented, integrating multi-point influent distribution, post-anoxic and post-aerobic zones, and supplemented with an equalization basin, high-efficiency sedimentation tank, and denitrifying deep-bed filter. During commissioning and operation, the process achieved average removal efficiencies of 96.10% for COD, 98.24% for NH3-N, 83.89% for TN, and 98.29% for TP. Effluent concentrations stabilized at 15.4 mg/L COD, 0.57 mg/L NH3-N, 7.94 mg/L TN, and 0.12 mg/L TP, consistently meeting the Class 1A standard of GB 18918—2002. The modified Bardenpho process demonstrates strong adaptability and stability for treating wastewater with high nitrogen and refractory organic loads, improving carbon source utilization and reducing energy consumption. Design parameters and operational experience provide valuable references for similar municipal plants, particularly those receiving significant industrial wastewater fractions.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3781-8
The 2xxx (Al-Cu-Mg) alloy is widely used in transportation fields due to its excellent strength-to-weight ratio. However, conventional heat treatments such as peak aging (PA) often result in a pronounced strength-ductility trade-off and limited fatigue resistance. To address these limitations, this work presents a comprehensive study on the mechanical properties and fatigue behavior of Al-Cu-Mg alloy subjected to a cyclic plasticity treatment. The cyclic strengthened (CS) samples exhibit a well-balanced combination of strength and ductility due to the formation of nanoscale solute clusters. A systematic and quantitative analysis of the strengthening mechanisms is performed to evaluate the contributions of key microstructural features to the mechanical response. Moreover, the CS samples also demonstrate a significantly higher fatigue ratio and fatigue strength compared to the PA sample, despite exhibiting comparable tensile strength. These improvements are attributed to the absence of weak precipitate-free zones (PFZs) induced as a result of cyclic plasticity, which completely eliminates the pronounced strength differential between the grain interiors and the PFZs observed in the PA state. This microstructural uniformity effect effectively suppresses strain localization under cyclic loading, promotes a more homogeneous strain partitioning, and consequently delays fatigue crack initiation. These findings highlight cyclic plasticity treatment as a promising microstructure design strategy for simultaneously enhancing the mechanical and fatigue properties of high-strength Al alloys.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60679-2
Olefin hydroformylation is a pivotal process for synthesizing high-value-added aldehydes, with applications extending from short-chain to long-chain olefins (C6+). Traditional homogeneous catalytic systems suffer from difficulties in separating and recovering precious rhodium (Rh), driving research toward heterogeneous catalytic systems. This review summarizes recent progress in supports for heterogeneous Rh-based catalysts, focusing on the influence of structural regulation strategies of inorganic oxide-supported, porous carbon-supported, organic porous polymer-based, zeolite-supported, and composite-supported catalysts on active site dispersion, regioselectivity, and cycle stability. Key findings include enhanced linear-to-branched (n/i) ratios and turnover frequencies (TOF) achieved through tailored support design. For instance, Rh1/CeO2 with morphology effects demonstrates molecular-level understanding of support effects, while Rh/activated carbon with surface oxygen groups improves catalytic performance in 1-hexene hydroformylation. Porous monophosphine polymers confine atomically dispersed Rh, achieving regioselective hydroformylation. Additionally, Rh-N4 single atoms and Rh clusters dual-active sites on supports yield ultra-high TOF. The review aims to provide insights for rational design of high-performance heterogeneous hydroformylation catalysts, addressing industrial challenges of catalyst recovery and stability.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025050601
China's iron and steel industry has undergone comprehensive ultra-low emission transformation, meeting stringent limits for conventional pollutants, yet the fate of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) remains unclear. This study combined field sampling and literature review to analyze PCDD/Fs emission characteristics from sintering, converter, and electric arc furnace processes before and after transformation, and calculated national emissions for 2022. Results demonstrate that ultra-low emission transformation effectively reduces PCDD/Fs emissions. Specifically, emission concentrations decreased by 86.5%, 95.1%, and 66.9% for sintering, converter, and electric arc furnace, respectively, with corresponding emission factors dropping to 0.11, 0.009, and 0.014 μg I-TEQ·t−1 product. Under the transformation scenario, total national emissions were 104 g I-TEQ (uncertainty ±26 g), a 94.9% reduction from the unreformed scenario (2049 ± 763 g I-TEQ). Congener profiles shifted from high-chlorinated dominance to low-chlorinated dominance, while toxicity equivalent distribution remained dominated by 2,3,4,7,8-PeCDF (35%–56%). This study quantifies the co-benefit of PCDD/Fs reduction, providing critical data for updating China's emission inventory and formulating toxicity-oriented control policies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4173-x
Ferroelectric memory, with its promise of low power consumption, high writing speed and exceptional endurance, requires the scaling of ferroelectric films to ultrathin dimensions—often just a few atomic layers thick. However, such extreme thinning risks destabilizing or even erasing electric polarization, mainly due to the detrimental depolarization field. Remarkably, certain ferroelectrics exhibit an intrinsic immunity to this effect, as predicted theoretically and confirmed experimentally. Examples include improper ferroelectrics, hyper ferroelectrics, engineered heterostructures, and low-dimensional van der Waals ferroelectrics. This review systematically examines these unique materials, unravelling the fundamental physics behind their polarization robustness and the mechanisms enabling them to resist the depolarization field. By bridging theory with experimental advances, we aim to inspire the design of next-generation ferroelectrics capable of overcoming critical challenges encountered in practical ferroelectric memory devices.