SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4320-4
Colloidal lead halide perovskite quantum dots (Pe-QDs) have achieved external quantum efficiencies exceeding 20% in red, green, and blue light-emitting diodes (LEDs), yet their integration into high-resolution displays is impeded by two persistent bottlenecks: the intrinsic ionic lability of Pe-QDs, which compromises structural and environmental stability, and the absence of mild, high-fidelity patterning techniques that avoid ligand detachment and surface defect formation. This work addresses both obstacles through a dual strategy. First, a ligand-fluoride co-stabilization method yields shape-defined, colloidally stable rhombic dodecahedral CsPbBr3 Pe-QDs; subsequent fluorine surface reconstruction using tetrabutylammonium fluoride (TBAF) enhances ligand binding affinity, producing BHOA+F CsPbBr3 Pe-QDs with a photoluminescent quantum yield (PLQY) of 94.6%. Accelerated ageing, ultraviolet irradiation, and thermal cycling tests confirm improved structural and environmental stability. Second, capillary liquid-bridge confined assembly enables reproducible, scalable fabrication of pixelated Pe-QDs with in-plane long-range order, vertical confinement, and precise spatial patterning. The resulting pixelated Pe-QDs LEDs exhibit high efficiency, sufficient brightness, and long operational stability, with the approach generalizable across red, green, and blue Pe-QDs for wide color gamut displays. This combination of surface fluorination and liquid-bridge assembly represents a landmark achievement in high-resolution display technology.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4179-x
Perylene diimide (PDI) radical anions exhibit poor environmental stability, restricting their generation efficiency and practical application. Here, a PDI-functionalized bispillar[5]arene (PDI-P5) was designed to construct stable and high-efficiency photothermal radicals. Intramolecular charge transfer (ICT) between PDI and bispillar[5]arene narrows the energy gap. Under 455 nm ultraviolet light irradiation and diethylamine (DEA) vapor exposure, photoinduced electron transfer (PET) efficiently generates PDI-P5·− radicals, which possess broad near-infrared (NIR) absorption, enhanced non-radiative transitions, and excellent stability. Notably, PDI-P5·− can rapidly reach 90 °C under 0.20 W cm−2 simulated sunlight irradiation. Moreover, it exhibits superior multi-step photothermal anti-counterfeiting performance. This work provides a novel strategy for the development of stable radical-based photothermal materials, which holds great potential for anti-counterfeiting and bioimaging applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3721-y
Anisotropic hydrogels have attracted significant attention for applications in actuators, soft robotics, and artificial muscles due to their ability to undergo shape morphing and generate anisotropic responses under external stimuli. Here, we report a novel strategy for fabricating anisotropic hydrogels using liquid crystal polymers (LCPs). A series of liquid crystal polyester-polyethylene glycol (LCP-PEG) multiblock copolymers with varying PEG block molecular weights were synthesized via one-pot melt-polycondensation. Upon stretching, LCP-PEG forms a stable, oriented microphase-separated lamellar structure, which enables reversible shape changes driven by melting-induced contraction and crystallization-induced expansion of the oriented PEG crystals. This unique structure imparts anisotropic swelling behavior to the films when exposed to water or humidity. The oriented microphase-separated lamellar structure confers high fracture strength (11.2–14.7 MPa), fracture strain (1600%–2100%), fracture energy (1.7–2.8 MJ m−2), and Young’s modulus (51.2–139.9 MPa). Furthermore, the anisotropic LCP-PEG hydrogel actuators exhibit versatile locomotion modes, including object grabbing and transfer between water and air, object gripping in rainy conditions, walking and somersaulting on ratchet-patterned bases under humidity stimuli, and slope climbing through somersault locomotion under salty water stimuli. These results demonstrate the potential of LCP-based anisotropic hydrogels for advanced soft robotic applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3697-8
Multi-site coupling is a promising strategy for developing highly efficient and CO-resistant hydrogen oxidation reaction (HOR) catalysts for proton exchange membrane fuel cells (PEMFCs). However, designing multifunctional synergistic schemes for single-atom sites remains a significant challenge. Herein, we propose a dual-template-confined oxophilic engineering strategy to construct well-dispersed iridium-nickel (IrNi) atomic dimers adjacent to IrNi nanoclusters on porous nitrogen-doped carbon (IrNi Dimer/NC1.8-PNC). The paired IrNi dimer features an asymmetric Ir-N3 configuration coordinated with heteroatomic Ni-N3O via an N-bridge. Remarkably, IrNi Dimer/NC1.8-PNC exhibits a ~23-fold enhancement in mass activity (4.36 A mg−1 Ir at 20 mV) and 5-fold longer stability compared to benchmarking Pt/C toward HOR, while achieving a high rated power density of 1.18 W cm−2 in PEMFC anode applications. Furthermore, IrNi Dimer/NC1.8-PNC demonstrates superior CO tolerance over monometallic Ir and Pt/C in both half-cell and full-cell devices. Combined experimental and density functional theory studies reveal that oxophilic Ni modulates the electronic environment of Ir through alloying and dimer interactions, thereby enhancing HOR activity. Importantly, the asymmetric IrNi dimer enables efficient CO* and OH* co-adsorption while facilitating CO2* desorption, synergistically mitigating CO poisoning and improving atom utilization efficiency. This work provides a design strategy and fundamental insights for multi-site synergistic catalysts in PEMFC anodes.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3581-2
Radiotherapy (RT) is a standard cancer treatment that directly kills tumor cells and promotes systemic immune responses. However, RT can exacerbate tumor hypoxia, which suppresses dendritic cell (DC) antigen presentation and weakens systemic anti-tumor immunity. Here, we report oxygen-loaded in situ gels carrying bacterial outer membrane (MOGel) that slowly degrade to release oxygen and bacterial outer membrane (OM). Oxygen release alleviates tumor hypoxia, while OM continuously activates DCs, enhancing their antigen-presenting capability. In vitro, MOGel combined with RT induced the strongest tumor cell apoptosis. In an orthotopic colon cancer model, MOGel+RT achieved an 80% tumor suppression rate. Notably, MOGel+RT elicited an enhanced abscopal effect, with hypoxia relief and enhanced DC activation contributing to systemic immune responses. These findings suggest that OM-based oxygen gels offer a novel strategy to enhance systemic immune responses to RT.