SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4425-4
Flexible and weavable alternating-current electroluminescent (ACEL) fiber devices are pivotal for wearable displays and human-computer interfaces, yet their intrinsic lack of color tunability restricts high-density information interaction. This study presents a dynamically color-tunable electroluminescent fiber device with a coaxial winding structure that integrates multiple fiber electrodes emitting the three primary colors. Through simple voltage driving, the device achieves a color gamut covering 131.07% of the sRGB standard, enabling arbitrary full-color tunability, including standard white light with CIE coordinates of (0.31, 0.33). The emission peak is continuously tunable over a 161.7 nm range, a 4-fold enhancement compared to previously reported ACEL fibers. The coaxial winding architecture is compatible with large-scale fabrication, yielding hundred-meter-scale fiber devices with a luminance variation of only 2.76%. The electroluminescent performance remains stable under stringent industrial standards: 10,000 friction cycles, 20 accelerated washing cycles, and 10-day storage at 105 °C and −20 °C. Integration into a smart textile watchband demonstrates real-time heart rate visualization via progress color changes and gesture-controlled color switching, validating its potential as an effective human-computer interface.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225184
Thermal power units have long dominated China's energy structure due to the low cost of coal and their role in ensuring grid stability. However, under the dual pressures of climate change and national carbon peaking/neutrality goals, the environmental impact of their 'three wastes' has become critical, necessitating energy-saving retrofits. This review systematically examines mainstream energy-saving technologies for thermal power units, including boiler combustion optimization, heating surface cleaning, turbine flow path upgrades, waste heat recovery and cascade utilization, and cold-end system optimization. Using coal consumption rate as the core economic index, the study integrates case studies and operational data from typical domestic and international units to evaluate the latest progress, practical effects, advantages, and limitations of each technology. Results indicate that these technologies significantly improve energy efficiency and reduce pollution. For instance, boiler combustion optimization based on support vector machines and neural networks enhances thermal efficiency and reduces NOx emissions. Turbine flow path modifications, from full three-dimensional CFD optimization to advanced blades and combined steam seals, yield notable gains in cylinder efficiency and heat rate reduction. Low-temperature economizers reduce coal consumption and auxiliary power/water use in dust removal and desulfurization systems. Heat pump applications include absorption, compression, and hybrid types. In cold-end optimization, data-driven predictive maintenance and real-time performance tuning of condensers achieve nearly 50% energy savings in circulating water pumps and an average coal consumption reduction of 2-3 g/(kW·h). Despite these advances, gaps remain in multi-objective optimization robustness, intelligent diagnosis, and advanced materials. Future research should focus on deep reinforcement learning for adaptive control, sensor networks for real-time diagnostics and predictive maintenance, and high-temperature corrosion-resistant materials for heat exchangers, while balancing initial investment and maintenance costs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3717-6
Poly(ethylene oxide) (PEO)-based all-solid-state polymer electrolytes (SPEs) hold significant promise for high-specific-energy and high-safety Li batteries, yet suffer from poor mechanical robustness and low Li+-conducting efficiency. Aramid nanofibers (ANFs), with exceptional mechanical strength and abundant intramolecular/intermolecular interactions, are effective additives, but their strictly symmetric interchain interactions generate a highly ordered hydrogen-bond network, producing inert aggregates that compromise electrolyte stability. Here, we construct a poly(ethylene glycol) (PEG)-mediated asymmetric interaction between ANF chains. PEG chains introduce weaker H-bonding acceptor sites, higher steric hindrance, and abundant lithiophilic groups, simultaneously disrupting strong symmetric ANF-ANF interactions and creating rapid Li-ion channels. The resulting electrolyte maintains excellent mechanical properties (yield stress of 3.25 MPa) and enables stable cycling of Li||Li symmetric cells for over 1600 h with low polarization voltage. In LCO||Li cells, the electrolyte achieves a capacity retention of 82.7% after 300 cycles at 1 C, markedly higher than the unmodified counterpart (35.5%). This synergistic optimization of interfacial compatibility and mechanical performance demonstrates a practical route toward safe, high-energy-density all-solid-state polymer batteries.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511054
A novel S-scheme heterojunction photocatalyst, Bi6O5(OH)3(NO3)5·3H2O/BiOBr0.8I0.2 (BON@BI), was synthesized via a one-step hydrothermal method using Bi6O5(OH)3(NO3)5·3H2O (BON), KBr, and KI as precursors. The mass ratio of BON to BiOBr0.8I0.2 (BI) was optimized, revealing that the 20% BON@BI composite (BON@BIOPT) exhibited the highest visible-light photocatalytic activity. Under 30 min of visible-light irradiation, BON@BIOPT achieved a 99.8% degradation efficiency of Rhodamine B (RhB), approximately twice that of pristine BI (52.2%). The composite displayed a rod-like morphology with uniform nanosheets, and its specific surface area increased from 32.54 m²·g⁻¹ (BI) to 44.7 m²·g⁻¹. The absorption edge red-shifted from 560 nm (BI) to 580 nm, narrowing the bandgap from 2.55 eV to 2.43 eV. The S-scheme heterojunction formed between BON and BI generates an internal electric field that effectively suppresses recombination of strongly reducing photogenerated electrons and strongly oxidizing holes, with superoxide radicals (O₂•⁻) and holes (h⁺) identified as the primary reactive species. BON@BIOPT exhibited excellent stability, retaining 88.6% degradation efficiency after seven consecutive cycles. It also demonstrated robust environmental adaptability, maintaining 85–98% degradation efficiency under various pH conditions and in the presence of interfering anions. The degradation pathway of RhB involves N-de-ethylation, cleavage of the conjugated chromophore, and deamination, ultimately mineralizing into low-molecular-weight organics, inorganic salts, CO₂, and H₂O. These results underscore the potential of BON@BIOPT for practical remediation of organic pollutants in water.