SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4420-7
Cu2-xSe is a leading p-type thermoelectric material owing to its phonon-liquid electron-crystal (PLEC) behavior, yet the atomic-scale mechanisms governing Cu+ migration remain unresolved. This study employs in situ high-resolution neutron diffraction coupled with maximum entropy method (MEM) analysis to map the temperature-dependent evolution of Cu+ nuclear density in β-Cu2Se and β-Cu1.95Se. At 398–423 K, intra-tetrahedral Cu 8c ↔ 32f <111> hopping emerges, with isosurface values of 0.505 fm Å-3 for β-Cu2Se and 0.484 fm Å-3 for β-Cu1.95Se. Above 448 K, inter-tetrahedral pathways form via Cu 32f ↔ 32f <100> or 32f ↔ 4b ↔ 32f <111> migration, as revealed by line scans along [1̅11̅] up to 723 K. The presence of Cu vacancies (x = 0.05) alters the onset and connectivity of these pathways, directly impacting phonon scattering and electron transport. These findings establish a structural basis for controlling Cu+ mobility, offering a rational route to mitigate Cu precipitation and enhance zT stability beyond 1.5 at 900 K. The work bridges microstructural dynamics and thermoelectric performance, providing critical guidance for defect engineering in superionic thermoelectrics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4283-0
Smart windows are critical for building energy conservation, yet existing technologies cannot simultaneously satisfy the diverse requirements of light transmission, thermal insulation, and privacy protection across varying scenarios, such as daytime transparency and nighttime heat retention with opacity. Herein, we report a thermo- and electro-responsive ionogel fabricated via one-step photopolymerization, integrating the electrochromic viologen derivative (Pa-PhV)(TFSI)2 with a thermoresponsive matrix. The (Pa-PhV)(TFSI)2 delivers excellent electrochromic performance, featuring dual-band light modulation, a high coloration efficiency of 433.6 cm2 C-1, and a fast coloration time of 2.52 s. The ionogel exhibits three stable switchable states under thermal and electrical regulation, fulfilling core practical demands for full-spectrum photothermal management. Model house tests verify its excellent seasonal adaptability, with a maximum indoor temperature reduction of up to 15 °C in a simulated summer environment. Furthermore, the ionogel enables dual-encrypted data storage via UCST and voltage triggering. This work broadens the application scope of viologen derivatives and offers a competitive strategy for multifunctional smart windows and encrypted data storage.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4244-0
Near-infrared perovskite light-emitting diodes (NIR-PeLEDs) suffer from poor operational stability, largely due to interfacial reactions at the electron-transport layer (ETL)/perovskite interface. Here, we introduce a zinc ion (Zn2+)-chelated hybrid ETL derived from a Zn2+-chelated polyethylenimine ethoxylated (PEIE) complex, which partially retains the surface properties of ZnO but exhibits significantly reduced oxygen defects and surface-adsorbed hydroxyl groups. This well-modulated surface promotes perovskite crystallization and mitigates interface-induced deprotonation of organic cations during device operation. Consequently, NIR-PeLEDs employing this hybrid ETL achieve a peak external quantum efficiency (EQE) of 20.1%, a high radiance of 652 W sr-1 m-2, and an exceptional T50 lifetime of 270.7 hours at a high current density of 100 mA cm-2, which is over five times that of devices based on conventional ZnO nanocrystal (NC) ETLs. Our results present an effective ETL strategy for operationally stable NIR-PeLEDs and thoroughly reveal the critical role of regulating interfacial reactions in stabilizing buried interfacial contacts. These findings provide valuable insights for advancing perovskite optoelectronic devices that suffer from interface-induced performance degradation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3588-2
The rapid evolution of aerospace technology necessitates the development of multi-functional composites that combine light weight, mechanical robustness, thermal protection/insulation, and electromagnetic interference (EMI) shielding. C/SiC porous ceramic composites are promising for thermal protection in hypersonic vehicles. Here, we report a facile strategy to fabricate Cf/SiC composite polymer-derived ceramics (PDCs) via re-pyrolysis of high-energy ball-milled polycarbosilane-vinyltriethoxysilane-graphene oxide (PVG) with Cf/SiC(rGO)p blend interleaves. In-situ generated honeycomb-like cellular structures and non-directional channels reduce density and increase porosity. High-quality SiO2 joints, formed from Si-dangling bonds, strengthen interfacial bonding via a brazing effect, while in-situ SiOC nanowires (SiOCnws) create a hierarchically enhanced network, improving fracture toughness and crack resistance. Multi-scale interfacial/dipole polarization enhances EMI shielding. The optimized Cf(0.2)/SiC(rGO) composite exhibits low density (1.49 g cm−3), high fracture toughness (6.32 MPa m1/2), hardness (7.18 GPa), compressive strength (72.67 MPa), and EMI shielding effectiveness of 58.31 dB. It maintains structural stability under butane blowtorch ablation at ~1300 °C for 3600 s. Porous variants show thermal conductivity of 0.211 W m−1 K−1 with 69.74% porosity. These multi-functional composites are promising for thermal protection systems in aerospace applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3860-0
Drug detection is critical for public health and security, yet reversible and highly sensitive sensing materials remain scarce. This study presents a novel ionogel sensor material, poly(ethylene glycol) diacrylate (PEGDA)/1-butyl-3-methylimidazole tetrafluoroborate, for reproducible detection of N-methylphenylethylamine (MPEA), a structural analogue of methamphetamine. The ionogel is fabricated by immobilizing a flowable ionic liquid within a PEGDA network via UV curing, preserving ionic mobility for efficient conduction. Integrated on a flexible poly(ethylene naphthalate) substrate, the sensor exhibits over 72.6% transmittance in the visible spectrum, enabling concealed attachment. Utilizing non-covalent interactions, the sensor achieves reproducible MPEA detection at sub-ppb levels at room temperature, with a theoretical detection limit of 317 ppt. It demonstrates high selectivity and consistency. Ionic conductivity was confirmed via current-voltage tests and impedance spectroscopy, and the sensing mechanism was clarified. The device maintains reliable performance under bending, indicating suitability for dynamic environments. With Bluetooth integration for wireless data transmission, the sensor shows strong potential for practical, discreet drug monitoring in real-world applications.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507051
This study investigated the dynamic characteristics and recovery of ammonia emissions from a growing-finishing pig house in Yanshi District, Luoyang City, Henan Province, China. High-sensitivity electrochemical sensors and an ammonia absorption recovery device were employed for continuous monitoring and treatment of exhaust air. The results revealed periodic fluctuations in ammonia emission concentrations, strongly correlated with indoor temperature and humidity. Over the entire monitoring period, the average daily ammonia concentration in exhaust air was 9.852 mg·m−3, below the national emission limit of 25 mg·m−3. However, during high-temperature periods (>30 °C), localized concentrations reached 38.36 mg·m−3. Humidity, particularly from spray cooling, temporarily suppressed ammonia volatilization, but its effect was modulated by temperature. Total ammonia emitted during the study was 1380.4 kg, with an average per-pig emission rate of 0.034 kg·d−1. After treatment with the exhaust gas absorption device, the average daily ammonia concentration dropped to 0.437 mg·m−3, achieving a mean recovery efficiency of 93.5%. These findings demonstrate that controlling environmental factors and employing external air absorption devices can significantly reduce ammonia emissions, offering a viable pathway for mitigating nitrogen pollution from livestock operations and promoting resource recovery.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507057
This study presents a novel electrochemical sensor for the rapid detection of trace lead ions (Pb(II)) in water, utilizing a rod-shaped bismuth-based electrode. The electrode was fabricated by modifying a glassy carbon electrode (GCE) with basic bismuth nitrate [Bi6O5(OH)3](NO3)5·3H2O, synthesized via a chemical precipitation method. The sensor was characterized by X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), electron probe microanalysis (EPMA), and energy-dispersive X-ray spectroscopy (EDS), confirming the rod-like morphology and composition. Electrochemical detection was performed using differential pulse voltammetry (DPV) in a 0.1 mol·L−1 NaAc-HAc buffer (pH 4.3). The sensor exhibited a linear detection range for Pb(II) from 1 to 90 μg·L−1, with a detection limit of 0.34 μg·L−1 and a sensitivity of 106 μA·(μmol·L−1)−1. The electrode demonstrated excellent anti-interference capability and reproducibility. Recovery tests in real water samples (tap water and campus lake water) yielded high recovery rates, indicating practical applicability. This work provides a simple, cost-effective, and reliable method for monitoring trace Pb(II) in environmental water, particularly relevant for public swimming pools and similar aquatic facilities.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605019
The utilization of food waste as a fermentation substrate can effectively reduce the substrate cost of lactic acid production industrialization, and synergistic fermentation with leachate could promote lactic acid production. However, the effect of magnesium ions in leachate on lactic acid production, metabolic processes, and key functional bacterial communities remains unclear. This study investigated the effect of adding magnesium ions on lactic acid fermentation using food waste as substrate. Results showed that the optimal magnesium ion dosage was 750 mg/L, achieving a lactic acid yield of (37.4±0.5) g COD/L and L-lactic acid optical activity of (96.3±0.9)%. Mechanistic studies revealed that magnesium ions accelerated substrate dissolution, significantly enhanced the activities of key hydrolytic enzymes (α-glucosidase, amylase, protease) and L-lactic acid producing enzymes, thereby increasing hydrolysis and lactate production rates. Simultaneously, the relative activity of lactate-consuming enzymes decreased, slowing lactate consumption. At 750 mg/L Mg2+, the relative abundances of Enterococcus and Streptococcus were 65.0% (2.2 times the Blank) and 18.7% (37.8% of the Blank), respectively, with a total of 83.7%, enhancing lactic acid yield and L-lactic acid optical activity. Metabolic pathway prediction and functional gene analysis further indicated that magnesium ions increased the relative abundance of carbohydrate metabolism pathways and genes encoding lactate dehydrogenase. This study provides technical support for food waste resource utilization.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.226111
Efficient capture of the greenhouse gas nitrous oxide (N2O) is critical for climate change mitigation and resource recovery. In this study, two guanidinium-based hydrogen-bonded organic frameworks (HOFs) with pyridyl nitrogen site isomerism, namely G-5,5'-BPyDC and G-4,4'-BPyDC, were constructed using 2,2'-bipyridine-5,5'-dicarboxylic acid and 2,2'-bipyridine-4,4'-dicarboxylic acid as ligands. The effects of ligand structure on hydrogen-bonded network, pore environment, and N2O/N2 adsorption separation performance were systematically investigated via single-crystal X-ray diffraction, thermogravimetric analysis, Hirshfeld surface analysis, and gas adsorption experiments. Both frameworks are built via N-H...O hydrogen bonds. The asymmetric unit of G-5,5'-BPyDC contains two methanol molecules, resulting in larger free volume and surface area compared to G-4,4'-BPyDC, which exhibits more compact packing. Both materials show decomposition temperatures above 290°C, indicating good thermal stability. Hirshfeld surface analysis reveals that the total contribution of O-H/H-O and N-H/H-N hydrogen bonds in G-5,5'-BPyDC (32.0%) is higher than that in G-4,4'-BPyDC (29.7%). At 25°C and 4.0 MPa, the N2O adsorption capacity of G-5,5'-BPyDC is 2.32 mmol/g, surpassing that of G-4,4'-BPyDC (2.02 mmol/g). IAST calculations show that the selectivities of G-5,5'-BPyDC for N2O/N2 (50:50 and 10:90) mixtures reach 29.26 and 111.32, respectively, significantly superior to those of G-4,4'-BPyDC (6.61 and 17.03). Pyridyl nitrogen site isomerism effectively optimizes N2O/N2 adsorption and separation by modulating pore polarity and hydrogen-bonded network, offering a new strategy for isomer design.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4080-y
M1 macrophages (M1φ) are pivotal drivers in the progression from non-alcoholic fatty liver (NAFL) to non-alcoholic steatohepatitis (NASH). Longitudinal monitoring of intrahepatic M1φ could facilitate non-invasive diagnosis of NASH, yet achieving specific and sensitive in vivo imaging of M1φ remains challenging due to the nonspecific phagocytic activity common to all phenotypic macrophages. In this study, we developed a dual-target-recognizing photoacoustic nanoprobe that can target glucose transporters (GLUTs) and be selectively activated by nitric oxide (NO). Benefiting from its enhanced affinity for M1φ and decent responsive capability to NO, the probe exhibited favorable imaging performance toward M1φ in ex vivo experiments. Following systemic administration in diabetic mice, the probe rapidly accumulated in the liver, where it was selectively internalized by M1φ via specific recognition between glucose molecules and GLUTs, further inducing a NO-triggered enhancement of the photoacoustic signal. Distinct photoacoustic signal enhancement patterns were observed between NAFL and NASH livers, enabling non-invasive in vivo discrimination of NASH. This study proposes a novel strategy using a dual-target-recognizing probe to improve the selectivity and sensitivity of in vivo M1φ imaging, while also providing new insights for the non-invasive diagnosis of NASH.