SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3664-x
The proliferation of electronic devices and wireless communications has escalated the demand for materials that simultaneously provide electromagnetic interference (EMI) shielding and infrared (IR) thermal camouflage, a combination critical for military and civilian applications. Traditional metallic shields suffer from high density, poor processability, and cost, while polymer-based alternatives often lack sufficient shielding effectiveness and environmental stability. Here, we report a multilayer composite film fabricated via layer-by-layer vacuum filtration and hot-pressing, integrating modified aramid nanofibers (ANF) and MXene (Ti3C2Tx) nanosheets. The film architecture comprises ANF-polypyrrole (ANF-PPy) as the matrix and Ag-MXene as the functional filler, with in-situ grown Ag nanoparticles intercalating between MXene layers to enhance interlayer spacing and electromagnetic wave scattering. At a thickness of only 33 μm, the film achieves an average EMI shielding effectiveness (SE) of 66.75 dB and a specific shielding effectiveness (SSE/t) of 38432.54 dB cm2 g−1. The multilayer structure promotes multiple internal reflections and interfacial polarization losses, while the tight integration ensures high IR reflectivity. This work establishes a foundation for developing multifunctional protective materials with dual EMI shielding and IR camouflage capabilities, addressing the critical bottleneck of simultaneous performance in ultrathin, flexible formats.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025092802
Activated carbon (AC) filters in drinking water treatment plants (DWTPs) experience significant adsorption performance decline over extended operation, yet complete media replacement is a major cost. To evaluate cost-effective strategies, pilot-scale column experiments with five AC replacement ratios (0%, 30%, 50%, 70%, and 100%) were conducted to assess removal of disinfection by-product (DBP) precursors and pesticide-related emerging contaminants. For dissolved organic matter (DOM), all fractions except low molecular weight compounds (LMWC) achieved >85% of the removal obtained with full replacement when 70% new AC was used, with UV254 removal reaching 70%. LMWC, due to small molecular size and low adsorption energy, required higher replacement ratios or full replacement for substantial removal. For DBPs, removal of trihalomethanes (THMs) and haloacetic acids (HAAs) was insensitive to replacement ratio, while haloacetaldehydes (HALs) removal improved markedly with increasing ratio, indicating structural selectivity. For pesticide-related contaminants, all except triazoles achieved >95% removal at 70% replacement; triazoles, due to high water solubility, high polarity, and low octanol-water partition coefficient, achieved only ~60% removal. Overall, replacing 70% of AC restored treatment performance to >80% of that with full replacement, ensuring effluent quality while saving ~30% of new carbon cost. Molecular structure, polarity, and pore size matching are key determinants of removal efficiency; optimizing replacement ratio balances water quality and economic benefits.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510044
The efficient treatment of sulfur-containing volatile organic compounds (S-VOCs) has become a critical task for air pollution control and green low-carbon transition under China's 14th Five-Year Plan. Industrial emissions often contain multiple S-VOC species, whose interactions can complicate degradation pathways, generate uncontrollable byproducts, and deactivate catalysts, limiting practical application. This review systematically summarizes the past decade of research on catalytic degradation of thiols and thioethers in multi-pollutant systems, focusing on competitive adsorption mechanisms, interfacial reaction pathways, and environmental factor regulation. Performance differences and reaction mechanisms across various catalyst systems under coexisting S-VOCs and inorganic sulfur are compared. Key findings indicate that mixed thiol systems exhibit faster deactivation than single-component systems due to temperature-dependent competitive adsorption and pathway switching, governed by molecular size–active site matching. Strategies such as metal–support strong interactions, zeolite confinement, nanocluster effects, and single-atom catalysts have improved activity and stability. However, dynamic competition mechanisms at active sites remain unresolved. Future research should develop atomic/molecular-level characterization techniques and multi-variable kinetic models, and shift from end-of-pipe purification to resource recovery, e.g., converting H2S and thiols into high-value chemicals like methanethiol, achieving dual goals of pollution control and sulfur resource recycling.