SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4312-8
Carbazole phosphonic acid-based self-assembled molecules (SAMs) serve as effective hole-selective contacts in organic solar cells (OSCs), yet their molecular packing and aggregation behavior during solution processing remain difficult to control, limiting hole transport and device durability. This study introduces a polymer-templated self-assembly strategy to regulate molecular organization by one-step spin-coating a blend of [2-(9H-carbazol-9-yl)ethyl]phosphonic acid (2PACz) and PEDOT:PSS. The polycationic PEDOT+ framework acts as a template, providing supplementary anchoring interactions that promote ordered molecular arrangement and suppress unfavorable agglomeration. Pronounced face-on orientation and enhanced structural coherence of 2PACz within the polymer matrix are evidenced. The templated ordering improves vertical charge transport, interfacial homogeneity, and film morphology. In binary OSCs based on PM6:BTP-eC9, the hybrid hole transport layers (HTLs) yield a champion power conversion efficiency (PCE) of 20.26%, with an open-circuit voltage (VOC) of 0.874 V, a short-circuit current (JSC) of 28.97 mA cm-2, and a fill factor (FF) of 80.02%. Devices incorporating hybrid HTLs exhibit exceptional operational stability, retaining over 90% of initial PCE (T90) after 405 h of continuous operation at the maximum power point (MPP). This work establishes polymer-directed SAM assembly as a scalable route to simultaneously optimize nanoscale molecular packing, interfacial energetics, and long-term device stability for high-performance OSCs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4201-0
Open fracture fixation faces dual critical challenges: bacterial infection and impaired bone healing. This study presents a rationally designed biomacromolecular network coating (Ti-GOED) on titanium alloy bone plates to simultaneously address these issues. The coating integrates antimicrobial and osteogenic components, achieving an optimal balance between antibacterial efficacy and biocompatibility. In vitro assays demonstrated that Ti-GOED eliminates over 99% of common pathogenic bacteria by inhibiting peptidoglycan synthesis, disrupting bacterial cell wall formation, compromising membrane integrity, and leading to intracellular DNA leakage and bacterial death. Concurrently, Ti-GOED enhances the proliferation and osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) via activation of the PI3K-Akt and HIF-1 signaling pathways. In vivo animal experiments confirmed strong antibacterial and osteogenic properties. This work provides a strategy for developing antibacterial coatings on medical devices, with significant potential for preventing and treating infections post-fracture fixation.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509020
The AAOA-MBR (anaerobic-anoxic-oxic-anoxic membrane bioreactor) process is widely used in municipal wastewater treatment, but its multi-stage internal recirculation complicates sludge retention time (SRT) and carbon source distribution. This study systematically regulated three reflux ratios (R1: membrane tank to oxic tank; R2: oxic tank to anoxic I tank; R3: anoxic II tank to anaerobic tank) in a pilot-scale system (0.24 m3·d−1) to reveal their effects on nutrient removal and membrane fouling. When R1:R2:R3 = 300%:200%:100%, effluent COD, TN, TP, and NH3-N met discharge standards. Reducing R1 and R2, thereby decreasing total reflux ratio from R=6 to R=3, shortened SRT, which suppressed nitrifier accumulation and increased effluent COD and TN, but decreased TP. High-throughput sequencing of anoxic I and oxic tanks showed that denitrifying bacteria (Thauera and Ottowia) relative abundances decreased from 0.68% to 0.42% and 0.51% to 0.24%, respectively, while the phosphorus-accumulating organism Candidatus_Accumulibacter increased from 0.78% to 1.12%, enhancing phosphorus removal. Additionally, lowering R1 to 200% caused sludge accumulation in the membrane tank, exacerbating membrane fouling. Thus, internal recirculation ratios must be adjusted based on influent characteristics to balance nutrient removal and membrane performance.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509120
The 'Zero-Waste City' initiative, centered on source reduction, resource utilization, and safe disposal of solid waste, aims to minimize environmental impact. To quantitatively assess its carbon reduction contribution, this study took Mianyang as a case, systematically collecting data on solid waste generation, utilization, and disposal across industrial, agricultural, and other sectors from 2021 to 2024. Employing an improved WARM model and emission factor method, and incorporating generation, utilization, and disposal intensities, the carbon reduction benefits before (2021–2022) and after (2023–2024) the initiative were evaluated. Results show that despite significant improvements in comprehensive utilization and safe disposal rates, total solid waste generation increased, leading to a net negative carbon effect of -127.6×10^4 tCO2eq based on absolute quantities. However, after stripping economic and population growth factors, intensity-based accounting revealed a cumulative reduction of 10.8×10^4 tCO2eq, demonstrating significant synergistic benefits. The industrial sector contributed the most, with a reduction of 40.2×10^4 tCO2eq, driven by green transformation and enhanced utilization capacity. Conversely, the rising intensity of domestic solid waste generation resulted in a negative benefit of -46.1×10^4 tCO2eq, highlighting a key area for future improvement. The study underscores the necessity of considering both intensity and absolute quantity dimensions in evaluating rapidly developing cities. These findings provide practical evidence and reference pathways for advancing 'Zero-Waste City' construction and synergistic pollution reduction and carbon mitigation under the 'dual carbon' goals.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026031101
Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) is widely used for molecular characterization of complex organic matter due to its ultrahigh resolution and mass accuracy. In atmospheric and natural organic matter studies, signal intensity is often used as a proxy for relative abundance or combined with a single internal standard for semi-quantitative comparison. Such practices assume uniform response across species of different mass-to-charge ratios (m/z); however, electrospray ionization (ESI), ion transport, and space-charge effects within the ICR trap can introduce mass-dependent biases. This study systematically evaluated mass discrimination effects on fatty acid analysis using a 9.4 T ESI-FT-ICR-MS, employing C12–C30 straight-chain saturated fatty acids, three deuterated internal standards, and three concentration levels. Results showed: (1) Absolute intensities of fatty acids and internal standards were not linearly proportional to concentration; as fatty acid concentration doubled, intensity increases were non-proportional, while internal standard intensities declined by up to 53% despite constant concentration. At equal concentrations, intensity decreased markedly with molecular weight—triacontanoic acid (C30) was ~40 times lower than lauric acid (C12), indicating severe underestimation of high-molecular-weight species. (2) Response ratios of fatty acids to internal standards versus concentration ratios exhibited good linearity (R² > 0.9). The derived deviation coefficients (F) increased exponentially with m/z (R² > 0.999), reaching >50 for C30. (3) Application to PM2.5 fatty acids showed that after F correction, abundances of long-chain fatty acids (C20–C30) increased 3.6-fold, and the carbon preference index (CPI) shifted from 1.8 (fossil fuel source) to 3.4 (higher plant source), demonstrating that neglecting mass discrimination leads to misidentification of sources. These findings underscore the necessity of systematic evaluation of mass discrimination effects in ultrahigh-resolution mass spectrometry for accurate organic composition and source apportionment.