SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4350-4
Flexible wearable sensors have transformed motion tracking, soft robotics, and human-machine interfaces by enabling precise movement detection and adaptability to curved surfaces. However, conventional composite sensors often face challenges such as limited sensitivity, detection range, linearity, and durability. In this study, we propose a stretchable auxetic sensing textile with a negative Poisson’s ratio (NPR) structure, incorporating reduced graphene oxide (rGO) and carbon nanotubes (CNT) by micro-crack engineering to enhance its mechanical durability and sensing performance. Integrating macro-scale NPR with micro-scale wrinkles, this innovative design achieves a high sensitivity of 11.2 within a wide detection range (0-100%), a more linear sensing range with an R2 value of 0.998, an ultra-low detection limit of 0.5%, and exceptional durability, outperforming conventional wearable sensors. Additionally, the textile sensor boasts excellent moisture permeability (32.7 g m⁻² h⁻¹) and a remarkable NPR value of -0.25, ensuring comfort and adaptability for various wearable applications. Integrated with deep learning algorithms, the auxetic sensing textile demonstrates 98% accuracy in recognizing soft robotic movements at various bending angles. It is capable of capturing both small-scale physiological signals, such as electrocardiograms, and large-scale movements, offering significant freedom of movement and adaptability to complex surfaces.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4206-6
Precise patterning of highly ordered organic semiconductor (OSC) thin-film arrays is critical for next-generation electronics. We report a ladder-like polysilsesquioxane (LPSQ) strategy to synthesize two functional analogs with tunable surface energies and robust dielectric properties. These LPSQ dielectrics, functionalized with alkyl or fluoroalkyl side chains, serve dual roles as gate insulators and patterning layers to guide blade-coating of 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT). This approach yields highly aligned arrays suitable for three-dimensional integration in flexible electronics. Synergistic combination of dense LPSQ dielectric packing and aligned semiconductor domains leads to excellent organic thin-film transistor (OTFT) performance, achieving approximately four-fold improvement in field-effect mobility compared to conventional silicon oxide dielectrics. Patterned LPSQ dielectrics enable high-resolution C8-BTBT patterning on plastic substrates, supporting 4-inch-scale 3D integration of flexible logic circuits, including inverters (voltage gain >100), NOR gates, and NAND gates. This work provides a scalable route to high-performance, large-area flexible organic circuits.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507029
This study systematically evaluates the environmental risks associated with the resource utilization of municipal solid waste incineration (MSWI) fly ash in the production of aerated concrete, co-prepared with multiple solid wastes. The focus is on the leaching behavior and total content of heavy metals (Cr, Pb, Cd, Cu, Zn) under CO2 curing and chelating agent stabilization. Water washing pretreatment parameters (liquid-to-solid ratio, washing time, ash-to-slag ratio) were optimized for chloride removal. Results demonstrate that CO2 curing suppresses the leaching of most metals; leaching concentrations of Cr, Pb, Cd, and Zn decrease with reduced fly ash content, whereas Cu leaching increases when fly ash is absent. The addition of 17.5% organic sulfur stabilizer (DTC) significantly outperforms inorganic sulfide (Na2S) in immobilizing heavy metals, achieving compliance with national standards without compromising compressive strength or carbon sequestration. Water washing effectively reduces soluble chloride content to below 1% (mass fraction), meeting the HJ 1134-2020 regulatory limit. Optimal parameters include a liquid-to-solid ratio of 5, washing time of 20 min, and a raw material ratio of incineration bottom slag:fly ash:slag = 40:20:40. Under these conditions, the final product exhibits a compressive strength of 1.50 MPa, with heavy metals and soluble chlorides fully compliant. This work provides key technical support for the safe recycling of MSWI fly ash in building materials.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60640-8
Ethylene (C2H4) in vehicle exhaust is a highly reactive volatile organic compound (VOC) whose photo-oxidation with NOx contributes to the formation of O3 and secondary organic aerosols (SOA), a key precursor of PM2.5. This study designs a novel MgO-supported Ag-Cu bimetallic catalyst and investigates its performance using density functional theory (DFT). The effects of Ag and Cu loading on geometric structure, stability, and reactant adsorption are analyzed, and the catalytic oxidation pathways of C2H4 over AgCu-MgO are elucidated. Results indicate that loading Ag significantly enhances C2H4 adsorption, with a maximum adsorption energy of -1.46 eV, while O2 adsorption remains weak (-0.45 eV). Cu-MgO shows moderate C2H4 adsorption (-0.87 eV at bridge site) but higher O2 adsorption (-0.76 eV). Among 17 AgCu-MgO dual-atom catalyst (DAC) configurations, those with Ag and Cu co-adsorbed at Mg sites are thermodynamically more stable (binding energies below -10 eV). Configurations with Ag and Cu in close proximity enhance co-adsorption of C2H4 and O2. C2H4 oxidation preferentially proceeds via C=C bond cleavage to form *CH3 and CO2. For three representative configurations (1, 3, 6), free energy barriers for rate-limiting steps in the *HCO and CH2O pathway are consistently higher than those for *CH3 and CO2 pathway. Configuration 6 exhibits the lowest energy barrier (0.32 eV) for its rate-limiting step, indicating the highest catalytic performance. This study provides atomic-scale insights for rational design of efficient catalysts targeting olefinic pollutants in automotive emissions.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025032004
This study proposes an integrated source apportionment framework that synergistically integrates pollution source classification, atmospheric dispersion modeling, backward trajectory analysis, weighted trajectory clustering, and forward contribution estimation to accurately target peak reduction at localized air pollution hotspots. Applied at the County-Town Scale in Beijing, this method was employed to investigate pollution episodes at the Tongzhou Dongguan monitoring site. Source classification relied on a pollution fingerprint database and temporal concentration profiles, while local contributions were quantified through combined air quality modeling and monitoring data. Forward and backward trajectory analyses enabled the identification of potential source regions and key contributors. Results indicate that construction dust, road dust, and emissions from the catering industry were the dominant local sources, with construction and road dust contributing most prominently to PM2.5 concentrations. Furthermore, abnormal PM2.5 increases were closely linked to low boundary layer height, weak winds, and high humidity, emphasizing the role of meteorological conditions in pollution accumulation. The proposed framework proves effective in pinpointing local pollution sources and offers a scientific basis for targeted air quality management at finer spatial scales.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607004
Pelletizing technology is widely applied in biomass and coal fuel processing, offering advantages in transport, storage, and energy density. Coal gasification fine slag (CGFS), a carbon-rich coal-based solid waste, holds potential as a fuel. This study prepared centimeter-scale composite pellets by blending CGFS with various biomass types under 6 MPa at room temperature for 2 minutes. Combustion and emission characteristics were investigated using a self-developed flat-flame macro-thermogravimetric reactor simulating high heating rate conditions. Results showed that biomass type significantly influenced combustion due to chemical composition differences. Introducing biomass altered fuel particle composition, enhancing combustion rates of single-component fuels by 3–5 times during volatile combustion. Co-combustion reduced NOx and CO emissions by over 50% compared to pure CGFS. Higher biomass ratios accelerated volatile release and shortened burnout time but increased NO emissions due to higher volatile nitrogen content. Conversely, CO emissions decreased due to improved char combustion conditions. These findings provide critical experimental support for optimizing clean and efficient solid fuel production from CGFS and biomass.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4107-x
Aqueous fiber zinc-iodine batteries (FZIBs) with four-electron redox exhibit inherent safety and high energy density for wearable electronics. Nevertheless, their practical implementations are hindered by unsatisfactory cycling stability and low realistic energy density, mainly caused by severe H2O-induced nucleophilic attack toward iodine species and poor zinc anode reversibility. Here, we report a quaternary ammonium-mediated coordination strategy to simultaneously address the irreversible cathode/anode redox behavior and thus promote the electrochemical performance of four-electron FZIBs. The cationic choline ion (Ch+) induces complexation with ICl2− via electrostatic interaction, homogenizing the electron cloud density and suppressing irreversible hydrolysis of I+ species, enabling a reversible near-theoretical high capacity of 418.3 mAh g−1. Meanwhile, preferentially adsorbed Ch+ on the zinc anode surface creates positively charged shielding layers, mitigating the tip effect caused by localized electric field and achieving robust zinc stripping/plating. The enhanced cathode/anode reversibility and improved interfacial stability enable stable FZIBs operation for over 20,000 cycles at 20.0 A g−1. Moreover, successful integration of FZIBs into electronic textiles with glucose and cardiac rhythm sensors demonstrates great potential for next-generation wearable electronics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4052-0
Cutaneous wound infections affect millions of patients annually worldwide, and early diagnosis is critical for timely anti-infection treatment. Bacterial infections alter wound pH, offering a promising diagnostic approach. Here, a diagnostic smart dressing (CMC-PDBI) is developed by ultraviolet-initiated crosslinking of a pH-responsive indicator coating, incorporating modified bromothymol blue, onto a carboxymethyl cellulose substrate. The dressing exhibits superior pH-triggered color-changing performance in both phosphate buffer solution and bacterial cultures across the pH range associated with wound infection (orange at pH 6.0, green from pH 6.5 to 7.5, blue at pH 8.0). In a murine wound infection model, CMC-PDBI indicates infection two days before symptomatic manifestation. Early therapy guided by the dressing accelerates wound healing and reduces inflammation. A smartphone application (InfectSense) assists in identifying infection risk. This work presents a novel early-warning platform for qualitative visual diagnosis of wound infections before clinical symptom onset, with high potential for clinical and home care settings.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4334-9
Piezoelectric materials underpin modern electromechanical energy conversion, serving as critical components in sensors, actuators, and energy harvesters. Their performance is intrinsically governed by the piezoelectric coefficient, yet optimizing this property remains challenging due to the profound influence of diverse microscopic structures. This review systematically examines three fundamental crystalline architectures—perovskite, wurtzite, and fluorite—and critically analyzes performance optimization strategies tailored to each structure. We explore five principal modification approaches: defect engineering, elemental doping, heterostructure film fabrication, composite film design, and buffer layer incorporation, with emphasis on the underlying physical mechanisms that drive property enhancements. By providing a cross-structural comparison, this review establishes clear structure–property relationships, offering a foundational guide for material selection and design. Furthermore, we highlight the implications of these advanced materials for next-generation applications in energy harvesting and smart devices. Finally, we present a forward-looking roadmap, outlining emerging research directions and addressing key technical challenges to guide the development of next-generation high-performance piezoelectric materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4132-y
Manganese-iron-based mixed polyanionic cathodes are promising for sodium-ion batteries (SIBs) due to high energy density and operating voltage, but suffer from Jahn-Teller distortion of Mn3+ that degrades cycling stability. Here, a structural modulation strategy via Mg2+ doping is reported. Electrochemically inert Mg2+ forms stronger chemical bonds, adjusts lattice parameters, and suppresses Jahn-Teller distortion, enhancing structural stability. Mg2+ also widens sodium-ion diffusion channels, improving diffusion kinetics. Additionally, an in-situ three-dimensional carbon nanotube (CNT) conductive network boosts electronic conductivity. The resulting NFMPP-Mg@CNTs cathode delivers a discharge capacity of 126 mAh g−1 at 0.1 C (near theoretical 129 mAh g−1), retains 80% capacity after 3000 cycles at 0.5 C, and achieves an energy density of 401 Wh kg−1, among the highest reported for mixed phosphate systems. Ex-situ XPS and first-principles calculations confirm that Mg2+ resists geometric distortion by enhancing lattice stability and widening Na+ diffusion pathways (migration barrier reduced from 0.566 to 0.398 eV). This work provides a viable route for high-energy, long-life SIB cathodes suitable for large-scale energy storage.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4147-9
Fiber-shaped zinc-air batteries (FZABs) with aqueous electrolytes combine intrinsic safety, high energy density (1086 Wh kg−1), and environmental compatibility, making them attractive for wearable applications. However, free water in the electrolyte induces severe anode degradation while being a critical reactant for cathode redox, presenting a dilemma between anode stability and cathode functionality. The semi-open structure of FZABs allows airborne water to permeate and migrate to the anode, causing interfacial instability, while high surface area accelerates solvent evaporation, leading to increased internal resistance and salt crystallization. Consequently, typical cycle life is limited to <50 h. To overcome these challenges, we report a polymer electrolyte that captures atmospheric water as a solvent through the semi-open structure, achieved by introducing acetamide (AA), identified via unsupervised clustering algorithms, into the poly(vinylidene fluoride-hexafluoropropylene)/zinc trifluoromethanesulfonate (PVDF-HFP/Zn(OTf)2) system. AA incorporation preserves solvent-retention capability while reconstructing the Zn2+ coordination structure, promoting salt dissociation and polymer-segment mobility. Low adsorption energy of AA on zinc surfaces suppresses parasitic reactions from ambient moisture, and preferential adsorption across zinc crystal planes directs Zn2+ deposition along the (002) face, leading to uniform plating morphology. The exogenous aqueous polymer electrolyte exhibits superior mechanical properties, enabling stable output even after compression by a 1.7-t vehicle. As proof-of-concept, FZABs integrated with fiber solar cells and sensors in clothing enabled real-time health monitoring and sustainable energy utilization, demonstrating promising practical applications.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3643-8
Inverted perovskite solar cells (PSCs) suffer from defect-mediated nonradiative recombination and inefficient charge extraction, particularly at the buried interface and grain boundaries (GBs), which limit power conversion efficiency (PCE) and operational stability. This study introduces a multifunctional phosphonic acid molecule, (2-(3,6-bis(trifluoromethoxy)-9H-carbazol-9-yl)ethyl)phosphonic acid (M28), as an additive in the perovskite precursor solution. M28 spontaneously segregates toward the buried interface and GBs, fulfilling three roles: (1) slowing crystallization to enlarge grains and improve film quality, (2) passivating defects to suppress charge recombination, and (3) inducing p-type doping to create an extra electric field that promotes hole transport. Devices incorporating M28 achieve a champion PCE of 25.96% and retain 80% of initial efficiency after 1500 h of maximum power point tracking. This work demonstrates the efficacy of multifunctional phosphonic acid additives in addressing buried-interface and GB defects, offering a viable route to high-performance, stable inverted PSCs.