SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4435-9
Organic room-temperature phosphorescent (RTP) materials exhibit large Stokes shifts, high signal-to-noise ratios, and long emission lifetimes, positioning them as promising candidates for advanced anti-counterfeiting, bioimaging, sensing, and display technologies. Despite significant progress in molecular design—including radical-based systems, crystal engineering, host-guest doping, polymer matrix confinement, and supramolecular assembly—the integration of these materials with 3D printing remains in its infancy. This review critically examines the design strategies and research advances in 3D-printed organic RTP materials, focusing on the fundamental photophysical processes of intersystem crossing and suppression of non-radiative transitions. We analyze how printing parameters, matrix rheology, and layer-by-layer deposition influence phosphorescence quantum yields and lifetimes. Key challenges such as oxygen quenching, thermal degradation during extrusion, and poor interlayer adhesion are discussed with quantitative benchmarks. The review highlights that current 3D-printed RTP systems achieve lifetimes up to 1.2 s and quantum yields of 12% under ambient conditions, but scalability beyond 100 cm² remains limited by nozzle clogging and slow curing kinetics. By mapping material formulation to printability, we identify operational windows for extrusion-based and vat photopolymerization techniques. This work provides a roadmap for engineers to transition RTP materials from laboratory-scale demonstrations to industrial fabrication of complex 3D architectures with persistent luminescence.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025011804
Per- and polyfluoroalkyl carboxylic acids (PFCAs) are persistent organic pollutants whose isomers exhibit distinct environmental behaviors, bioaccumulation potentials, and toxic effects due to structural variations. Accurate identification of PFCA isomers is critical for risk assessment and pollution control, yet existing detection methods predominantly rely on standard references, posing challenges for precise analysis of isomers with subtle structural differences. Single-molecule electrochemical sensing via nanopores offers a standard-free approach by correlating molecular volume with current blockade, but its capability to distinguish PFCA isomers remained unverified. This study targeted three sets of PFCA isomers: 4,5,5-trifluoropent-4-enoic acid vs. 4,4,4-trifluoro-3-methylbut-2-enoic acid; 3,3,3-trifluoro-2-methylpropanoic acid vs. 4,4,4-trifluorobutanoic acid; and 2-(trifluoromethoxy)acetic acid, 3,3,3-trifluorolactic acid, and (2R)-3,3,3-trifluoro-2-hydroxypropanoic acid. By engineering nanopore interfaces (WT, R220N, R220Q Aerolysin) and extracting multi-dimensional characteristic parameters, the method achieved near 100% accuracy in identifying all seven isomers. Feature selection further enabled high classification accuracy with low data volumes, laying the foundation for rapid single-molecule detection of PFAS and other emerging contaminants.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509095
Biotrickling filtration (BTF) is a promising technology for treating volatile organic compounds (VOCs), but its application to hydrophobic alkanes like isohexane is hindered by mass transfer limitations, low degradation efficiency, and high operational costs. To address these bottlenecks, this study developed composite fillers by incorporating biochars derived from coffee grounds (CG), coconut shells (CS), corn cobs (CC), and activated carbon (AC) into a polyvinyl alcohol-sodium alginate (PVA-SA) hydrogel matrix. The fillers were systematically characterized for water retention, pore structure, surface functional groups, crystalline phase, and acid-base resistance. Adsorption capacity, biofilm formation, and isohexane degradation were evaluated using the strain Rhodococcus ruber ZYH-ZY. Among the composites, CG@PVA-SA exhibited superior performance: water retention of 358 mg·g−1 (vs. 280 mg·g−1 for control), enhanced mesoporosity (specific surface area 4.77 m2·g−1, pore volume 11.46 cm3·kg−1, 10–30% higher than control), and robust acid-base stability (mass loss 21.37% at pH 2 and 31.98% at pH 10). Its saturated adsorption capacity reached 201.02 mg·kg−1 (vs. 114.24 mg·kg−1 for control), and it promoted bacterial colonization with a survival rate of 79.0% (vs. 37.2% for control). Static degradation tests showed 96.59% removal of 10 μL isohexane within 24 h. The abundant polar functional groups and suitable mesoporous structure of coffee ground biochar synergized with the PVA-SA matrix, enhancing water retention, mass transfer, and microbial colonization, thereby significantly improving isohexane purification. CG@PVA-SA is an ideal filler for BTF treatment of alkane VOCs, offering a cost-effective and efficient solution for industrial VOC control.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025022301
Perfluorooctane sulfonate (PFOS), a typical perfluorinated compound, has been restricted from production and use due to its adverse effects on organisms and ecosystems. It has been replaced by various emerging alternatives, including 6:2 fluorotelomer sulfonic acid (6:2 FTSA). Recently, 6:2 FTSA has been widely detected in aquatic environments; however, studies on its toxicity to aquatic organisms remain limited. To compare the toxic effects of PFOS and 6:2 FTSA on aquatic organisms, zebrafish embryos were exposed to each compound for 72 h. Toxic effects were evaluated, and alterations in endogenous metabolites and metabolic pathways in zebrafish embryos were analyzed using metabolomics. The study demonstrated that both PFOS and 6:2 FTSA induced malformations in zebrafish embryos, with 61 and 33 endogenous differential metabolites identified respectively, predominantly involving lipids and amino acid derivatives. PFOS induces immunotoxicity primarily by disrupting lipid metabolism pathways, thereby interfering with normal embryonic development. In addition, 6:2 FTSA exhibited neurotoxicity by affecting metabolic pathways such as dopaminergic synapses. This study elucidates the differential metabolic responses induced by PFOS and 6:2 FTSA in zebrafish embryos, providing a theoretical basis for assessing the health risks of PFOS alternatives.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509031
This study establishes a carbon footprint calculation method and an environmental benefit assessment model for the dismantling process of waste televisions (TVs) based on life cycle assessment (LCA). Activity data on energy consumption and material flows were collected from typical treatment enterprises via field investigation. The ReCiPe 2016 model was applied to quantify midpoint and endpoint environmental impacts. Results show that the dismantling and recycling process yields net environmental benefits in most impact categories. At the midpoint level, significant reductions were observed in fossil resource scarcity (−26,494.23 kg oil eq), freshwater ecotoxicity (−2.21×10^4 kg 1,4-DCB), and greenhouse gas emissions (−956.53 kg CO2 eq). At the endpoint level, reductions in human health damage (−1.59×10^4 DALY), ecosystem damage (−2.35×10^4 species·yr), and resource depletion costs (−4.22×10^4 USD) were achieved. Carbon footprint analysis indicates that the carbon footprint per TV ranges from 0.231 to 0.247 kg CO2 eq per unit, with electricity consumption as the dominant emission source. Sensitivity analysis reveals that electricity consumption significantly influences the carbon footprint. Finally, emission reduction recommendations are proposed from aspects of equipment upgrade and energy management, providing theoretical basis and practical guidance for low-carbon treatment of electronic waste.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.3724/2097-213X.2025.JFCT.0034
Catalytic cracking of gasoline and diesel to light olefins is a pivotal route for high-value utilization of surplus fuels, typically employing zeolite catalysts. This study systematically investigates the effects of zeolite type and acidic properties on the catalytic cracking of dodecane, a diesel model compound, using SAPO-34, ZSM-5 with SiO2/Al2O3 ratios of 38, 85, and 200, and USY. Catalysts were characterized by XRD, SEM, N2 physisorption, NH3-TPD, and pyridine-FTIR, and evaluated in a fixed-bed reactor. Results demonstrate that zeolite type is the primary determinant of conversion and product distribution. SAPO-34, with 0.38 nm pores, achieved only 24.33% conversion and negligible BTX yield, with severe external coking. ZSM-5-38 and USY, with larger pores, achieved near-complete conversion; however, ZSM-5-38, possessing moderate acidity, yielded the highest light olefins (18.40%) and minimal coke (0.18%), while USY, with higher acidity, promoted hydrogen transfer and coking (12.90% coke). Within ZSM-5 series, lower acid site density (ZSM-5-200) proved optimal, achieving 97.79% conversion and a total light olefin yield of 41.93% (ethylene 11.11%, propylene 20.33%, butenes 10.49%) with low coke (0.43%). The study proposes reaction pathways and regulatory mechanisms, highlighting that zeolite type and acidity govern the relative rates of cracking, hydrogen transfer, oligomerization, aromatization, and coking, thereby dictating performance. These findings provide a rational basis for optimizing zeolite catalysts in commercial gasoline/diesel cracking processes.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509120
The 'Zero-Waste City' initiative, centered on source reduction, resource utilization, and safe disposal of solid waste, aims to minimize environmental impact. To quantitatively assess its carbon reduction contribution, this study took Mianyang as a case, systematically collecting data on solid waste generation, utilization, and disposal across industrial, agricultural, and other sectors from 2021 to 2024. Employing an improved WARM model and emission factor method, and incorporating generation, utilization, and disposal intensities, the carbon reduction benefits before (2021–2022) and after (2023–2024) the initiative were evaluated. Results show that despite significant improvements in comprehensive utilization and safe disposal rates, total solid waste generation increased, leading to a net negative carbon effect of -127.6×10^4 tCO2eq based on absolute quantities. However, after stripping economic and population growth factors, intensity-based accounting revealed a cumulative reduction of 10.8×10^4 tCO2eq, demonstrating significant synergistic benefits. The industrial sector contributed the most, with a reduction of 40.2×10^4 tCO2eq, driven by green transformation and enhanced utilization capacity. Conversely, the rising intensity of domestic solid waste generation resulted in a negative benefit of -46.1×10^4 tCO2eq, highlighting a key area for future improvement. The study underscores the necessity of considering both intensity and absolute quantity dimensions in evaluating rapidly developing cities. These findings provide practical evidence and reference pathways for advancing 'Zero-Waste City' construction and synergistic pollution reduction and carbon mitigation under the 'dual carbon' goals.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608023
Zinc-containing steel dust sludge, a by-product of steelmaking, contains high levels of chlorine (Cl) along with valuable metals such as Fe, Zn, K, and Na. When recycled into the steel production process, Cl accumulates, causing sintering instability and severe corrosion of blast furnace linings. This study investigated water leaching for Cl removal from zinc-containing steel dust sludge. Under optimal conditions (liquid-to-solid ratio 5 mL/g, temperature 70 °C, time 60 min, rotation speed 160 r/min), the Cl leaching rate reached 87%. Furthermore, a three-stage countercurrent water washing process at a liquid-to-solid ratio of 6 mL/g and room temperature for 45 min achieved a Cl leaching rate exceeding 90%. The water washing also reduced the leaching toxicity of metals in the sludge to a certain extent. Characterization via XRD, SEM, FT-IR, and XPS revealed that water washing primarily dissolved soluble chlorides (NaCl, KCl, etc.), increasing the specific surface area from 2.71 to 10.11 m²/g and average pore size from 12.83 to 16.29 nm. These findings provide theoretical and technical support for efficient Cl removal from zinc-containing steel dust sludge, facilitating its safe resource utilization.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3977-8
Single quantum well (single-QW) two-dimensional (2D) perovskites are poised to revolutionize optoelectronic devices owing to their superior stability and optoelectronic properties. However, solution-processed 2D perovskites typically suffer from disordered multiple-QW structures, leading to inconsistent device performance. Here, we introduce a solvent-hydrolysis-driven method to control crystallization kinetics, yielding highly ordered single-QW 2D perovskite films. Dimethylamine (DMA), generated from the hydrolysis of N,N-dimethylformamide (DMF), serves as a critical mediator, preventing cluster aggregation and ensuring a uniform colloidal distribution. This approach circumvents the formation of a heterogeneous intermediate phase, thereby promoting the formation of a homogeneous (DMA,MA)PbI3 phase, which is essential for single-QW film development. The resultant photodetector exhibits outstanding performance, with a responsivity of 1153 mA/W and a detectivity of 6.98 × 10^12 Jones, along with excellent photostability under ambient conditions. These attributes render it ideal for photoelectric imaging sensors and large-scale integration. Our findings establish a scalable, solution-processed strategy for high-performance 2D perovskite materials, opening new avenues for advanced optoelectronic applications.