SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4350-4
Flexible wearable sensors have transformed motion tracking, soft robotics, and human-machine interfaces by enabling precise movement detection and adaptability to curved surfaces. However, conventional composite sensors often face challenges such as limited sensitivity, detection range, linearity, and durability. In this study, we propose a stretchable auxetic sensing textile with a negative Poisson’s ratio (NPR) structure, incorporating reduced graphene oxide (rGO) and carbon nanotubes (CNT) by micro-crack engineering to enhance its mechanical durability and sensing performance. Integrating macro-scale NPR with micro-scale wrinkles, this innovative design achieves a high sensitivity of 11.2 within a wide detection range (0-100%), a more linear sensing range with an R2 value of 0.998, an ultra-low detection limit of 0.5%, and exceptional durability, outperforming conventional wearable sensors. Additionally, the textile sensor boasts excellent moisture permeability (32.7 g m⁻² h⁻¹) and a remarkable NPR value of -0.25, ensuring comfort and adaptability for various wearable applications. Integrated with deep learning algorithms, the auxetic sensing textile demonstrates 98% accuracy in recognizing soft robotic movements at various bending angles. It is capable of capturing both small-scale physiological signals, such as electrocardiograms, and large-scale movements, offering significant freedom of movement and adaptability to complex surfaces.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3559-5
Polyamide (PA) membranes are promising for lithium extraction from spent lithium-ion battery (LIB) leachate but face a trade-off between selectivity and permeability. Here, we demonstrate that nascent PA membranes post-grafted with triaminoguanidinium (TAG) monomers (PA-TAG membranes) gain expanded ion passage channels (0.8–7.1 Å) and enhanced positive charge, achieving high-performance lithium separation. The PA-TAG membrane exhibits a pure water permeance (PWP) of 15.5 L m−2 h−1 bar−1, superior divalent ion rejection (~98%), and an excellent separation factor (~30), significantly outperforming pristine PA membranes. In a simulated acidic battery leachate, the PA-TAG membrane achieved a relative volumetric lithium recovery rate of 48.2% after a two-stage nanofiltration process, with the Li+/M2+ mass ratio of the second permeate reaching 53.35, 445 times that of the feed (0.12). The membrane maintained stable performance over 45 hours of nanofiltration and resisted acidic conditions (pH=2) for at least 20 days. These results highlight the potential of PA-TAG membranes for efficient lithium extraction from acidic battery leachate, addressing the critical need for sustainable recycling of spent LIBs.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024112101
The biological reduction of Cr(VI) to less hazardous Cr(III) is a promising strategy for remediating Cr(VI)-contaminated sites. Both biochar and riboflavin can act as electron shuttles to accelerate this bioreduction process, yet their combined effects remain poorly understood. Using Shewanella oneidensis MR-1 as a model reducing bacterium, we investigated the joint influence of biochar (average particle size 28.85 μm) and riboflavin at high (1 mmol·L−1) and low concentrations on Cr(VI) bioreduction. Individually, biochar and high-concentration riboflavin enhanced indirect electron transfer, accelerating Cr(VI) removal. However, when combined, the fast-phase reaction rate (rf0) did not significantly improve compared to single amendments. The combined action factor revealed an antagonistic inhibition between biochar and riboflavin. Mechanistically, high-concentration riboflavin saturated biochar's adsorption sites (equilibrium concentration 0.96±0.04 mmol·L−1), hindering biochar's role as an electron conduit. With a bacterial density of 3.4×10^7 cells·mL−1, the inter-bacterial distance (30.87 μm) exceeded biochar's particle size, and the per-cell riboflavin concentration (2.9×10−2 pmol·cell−1) was sufficient for riboflavin to dominate as the primary electron shuttle, while biochar's surface became coated, reducing its efficacy. These findings reveal the complex interplay between biochar and soluble organic matter in Cr(VI) bioreduction, underscoring the need to consider such antagonistic effects when designing bioremediation strategies for multi-component contaminated environments.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3806-0
Sonodynamic therapy (SDT) faces critical limitations from inefficient sonosensitizers and the hypoxic tumor microenvironment, which curtail reactive oxygen species (ROS) generation. Here, we report a dual enzyme-mimicking sonosensitizer, termed sonozyme, engineered by integrating platinum nanoparticles (Pt NPs) with a tailored covalent organic framework (Y-COF). The spatially separated donor-acceptor architecture optimizes the band position of Y-COF, conferring intrinsic sonodynamic activity. Pt NPs further enhance ultrasound-triggered ROS generation by promoting exciton separation and transfer. Notably, sonozyme exhibits catalase (CAT) and peroxidase (POD) mimetic activities, converting endogenous H2O2 into O2 and ·OH, thereby alleviating hypoxia and augmenting oxidative stress. In vitro assays demonstrated significantly enhanced ROS production and cancer cell death under ultrasound irradiation. In vivo studies confirmed that sonozyme effectively suppresses tumor progression without observable systemic toxicity. This work presents a paradigm for designing high-performance multifunctional sonosensitizers, offering a promising strategy for cancer therapy.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60626-8
The dense crystalline structure and limited accessibility of cellulose severely hinder its efficient catalytic conversion. In response, biomimetic solid acid catalysts inspired by cellulase binding domains (CBDs) have emerged as a promising strategy to enhance cellulose hydrolysis by mimicking the substrate recognition and enrichment functions of natural enzymes. This review systematically summarizes recent advances in the design of CBD-mimetic solid acids based on four representative strategies: electrostatic anchoring, hydrophobic microenvironment engineering, spatial confinement, and covalent lock-and-key mechanisms. The underlying principles of these approaches, including substrate-specific recognition, local concentration enhancement, and synergistic “adsorption-catalysis” effects, are critically discussed to elucidate their contributions in improving catalytic affinity, selectivity, and durability. Despite significant progress, challenges such as mass-transfer resistance and insufficient structural robustness remain in complex biomass conversion systems. Looking forward, the integration of sub-enzymatic materials, such as carbon quantum dots (CQDs), into biomimetic catalysts offers new opportunities to achieve efficient, recyclable, and hierarchically organized catalytic systems, thereby providing a powerful route for the sustainable valorization of cellulose and other lignocellulosic resources.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025040705
Chromium is a common environmental metal pollutant. Shewanella oneidensis MR-1 can generate extracellular electrons, facilitating the reduction of Cr(VI) to Cr(III), thereby mitigating its toxicity. Both biochar and electroactive dissolved organic matter (e-DOM) regulate extracellular electron transfer during Cr(VI) bioreduction. In practice, surface DOM on biochar can detach and enter the environment, while the biochar matrix (BCM) remains the predominant form and coexists with e-DOM. However, the combined effects of BCM and e-DOM on microbial Cr(VI) removal are unclear. This study investigated the individual and combined impacts of biochar matrix and AQDS (a model e-DOM) on Cr(VI) reduction by S. oneidensis MR-1. Results showed that biochar matrix or AQDS alone promoted Cr(VI) removal, primarily by accelerating electron transfer during the fast reduction phase. However, when both were added, an antagonistic effect was observed, attributed to increased repulsive forces between the biochar matrix-AQDS complex and the bacterial cells, which inhibited electron transfer to Cr(VI). This research elucidates the electrochemical interactions between biochar matrix and e-DOM, providing a theoretical basis for biochar applications in environmental remediation and risk assessment.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202512015
The co-contamination of cadmium (Cd), lead (Pb), and zinc (Zn) in agricultural soils near mining areas poses significant risks to ecosystems and human health. Conventional stabilization materials often exhibit insufficient performance for Zn, particularly in multi-metal systems. This study synthesized a novel composite biochar (PFMBC) by loading phosphate and iron-manganese oxides onto biochar via phosphoric acid impregnation followed by secondary pyrolysis at 600 °C. The stabilization efficiency of PFMBC was evaluated against pristine biochar (BC) and iron-manganese modified biochar (FMBC) in a soil collected from a lead-zinc mining area (total Cd: 43.77 mg·kg−1, Pb: 3355.94 mg·kg−1, Zn: 1296.57 mg·kg−1). After 60 days of incubation with 5% PFMBC, the DTPA-extractable (bioavailable) fractions of Cd, Pb, and Zn decreased by 73.44%, 90.10%, and 69.33%, respectively, significantly outperforming BC and FMBC. Sequential extraction indicated that PFMBC promoted the transformation of Cd, Pb, and Zn from acid-soluble and reducible fractions to more stable residual fractions. Characterization via FTIR, SEM, and XRD revealed enhanced surface functional groups and the formation of stable mineral phases. The synergistic effects of phosphate precipitation, iron-manganese oxide adsorption, and surface complexation contributed to the superior stabilization, particularly overcoming the challenge of Zn immobilization. These findings demonstrate that PFMBC is a promising amendment for the remediation of Cd-Pb-Zn co-contaminated soils, offering high efficiency and long-term stability.