SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4417-x
Balancing mechanical strength, corrosion resistance, and soft magnetic performance in structural-functional integrated materials remains a persistent metallurgical challenge. This study reports a face-centered cubic (FCC) Fe40Co35Ni15Al3Ta2Cr5 (at.%) high-entropy alloy (HEA) that achieves an unprecedented combination of these properties. The alloy exhibits a tensile strength of ~1200 MPa, total elongation of ~25%, saturation magnetization of 101.54 Am2·kg-1, and coercivity of 267.34 A·m-1. These values surpass most reported magnetic HEAs and conventional soft magnetic alloys. In a simulated 3.50 wt.% NaCl seawater environment, the alloy demonstrates a corrosion current density of 3.99 × 10-7 A·cm-2, comparable to 316L stainless steel. The synergy arises from nanoprecipitate engineering within the FCC matrix, which impedes dislocation motion while maintaining magnetic domain wall mobility and promoting a protective passive film. This work provides a design pathway for soft magnetic structural-functional materials suitable for corrosive marine environments, where simultaneous load-bearing and magnetic actuation are required.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61071-2
Aqueous zinc-ion capacitors (ZICs) are promising energy storage systems due to their high specific capacity and superior reliability. Heteroatom-doped carbon materials have been shown to substantially increase the capacitance of ZICs, yet the underlying mechanisms remain poorly understood. In this work, coal-based activated carbon was functionalized with both boron (B) and nitrogen (N) to serve as the cathode material in ZICs. The optimized material, designated CAC-120, exhibits a high specific capacity of 371.4 mAh g−1 at 1 A g−1 and retains 74% of its initial capacity after 10,000 cycles. Electrochemical analysis and density functional theory (DFT) calculations reveal that pyridinic N plays a crucial role in enhancing Zn2+ storage, demonstrating superior electrochemical reversibility. Furthermore, an assembled aqueous ZIC using the CAC-120 cathode achieves a high reversible capacity of 90.8 mAh g−1 at 0.2 A g−1 and exceptional long-term stability over 17,000 cycles. This work provides valuable insight into the design of high-capacity and ultrafast pseudocapacitive carbon cathodes for ZICs, highlighting the synergistic effects of pore structure engineering and heteroatom doping.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61106-7
Hard carbon anodes for sodium-ion batteries suffer from limited capacity, low initial Coulombic efficiency, and poor long-term cycling stability. To address these issues, we report a dual-stabilization strategy that combines micropore confinement and chemical bonding to control sulfur species in coal-derived hard carbon. Bituminous coal, with its naturally condensed aromatic framework, serves as the carbon precursor. A two-step thermal process first constructs a microporous carbon framework, followed by gas-phase sulfidation to introduce sulfur. The sulfur is confined within micropores and forms stable covalent C–S bonds with the carbon matrix, providing synergistic physical–chemical stabilization. This suppresses sulfur migration, prevents interfacial side reactions, and introduces additional redox-active sites. The optimized sample (HC-10) delivers a high reversible capacity of 450 mAh/g after 800 cycles at a current density of 1 A/g, with excellent rate capability and cycling stability. Mechanistic analysis reveals that the stabilized sulfur species reversibly participate in sodium-ion storage and improve interfacial kinetics. This work provides an effective strategy for stabilizing sulfur in coal-derived carbon materials and offers insights into the design of high-performance anodes for sodium-ion batteries.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605020
To address the high CO2 emission proportion in the industrial sector, distillers' grain waste was converted into biochar for CO2 adsorption from flue gas. Raw biochar suffers from weak pore adsorption and poor selectivity at elevated temperatures. This study employed ash self-templating and particle self-assembly to create hierarchical pores and simultaneously load amine groups onto distillers' grains-derived biochar, yielding amine-functionalized hierarchical porous carbon spheres. The amine loading significantly increased, providing more CO2 adsorption sites, while retaining macroporosity (total pore volume 0.0030–0.0066 cm3/g after amine loading), which enhanced morphological stability and CO2 mass transfer. The optimal sample, 0.2PW-K-CNF-PEI, exhibited a CO2 adsorption capacity of 1.03 mmol/g at 100 °C, a CO2 diffusion coefficient of 0.0495 min−1, and a selective adsorption capacity of 44 mg/g at 80 °C. This work offers a solution for valorizing distillers' grain by-products and capturing CO2 from low-temperature flue gas.