New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61066-9
Carbon materials suffer from limited dielectric loss, resulting in poor impedance matching and inadequate microwave attenuation. To address this, hierarchical structures with synergistic loss mechanisms are sought. Here, biomass cattail serves as a sustainable precursor for nitrogen-doped carbon nanotube arrays decorated with Fe3C nanoparticles via chemical vapor deposition, yielding Fe3C@NCNTs/CMTs composites. The crystallinity, tuned by calcination temperature, critically influences microwave absorption. At 800 °C, the composite achieves a minimum reflection loss of –35.8 dB and an effective absorption bandwidth of 7.02 GHz at a thickness of only 1.7 mm, with an ultralow filler loading of 10 wt%, covering the entire Ku band and part of the X band. This performance stems from enhanced magnetic loss and multiple dielectric polarization mechanisms. The study demonstrates a promising strategy for designing biomass-derived carbon-based broadband microwave absorbers.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.3724/2097-213X.2025.JFCT.0027
Electrocatalytic CO2 reduction reaction (CO2RR) offers a promising route to mitigate CO2 emissions while producing valuable chemicals. This study reports a Cu-Sn alloy catalyst with a wheat-ear-like dendritic structure, fabricated via a one-step electrodeposition method, for selective CO2 electroreduction to formate. Compared to pure Cu and Sn electrodes, the Cu-Sn alloy exhibits superior catalytic activity and selectivity toward formate, achieving a maximum Faradaic efficiency (FE) of 80% and maintaining above 70% FE over a potential window from -1.7 V to -2.0 V (vs. Ag/AgCl). The enhanced performance is attributed to the unique dendritic morphology that provides abundant active sites and the synergistic alloying effect that modulates the adsorption of the CO2*- intermediate, as corroborated by electrochemical measurements and X-ray photoelectron spectroscopy (XPS). This work presents a facile strategy for designing bimetallic catalysts for efficient CO2RR to formate.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3745-1
Short-wavelength infrared (SWIR) organic photodetectors (OPDs) have attracted considerable attention due to their potential to overcome the limitations of inorganic counterparts. However, developing organic semiconductors with strong SWIR detection remains a significant challenge. Herein, we design and synthesize a new conjugated pyrrolic polysquaraine (PSQ-COT) by integrating a pyrrolic squaraine unit with a strong electron-donating moiety, achieving an absorption onset extending to 1.2 μm. To evaluate its detection performance, we fabricated two types of PSQ-COT-based SWIR OPDs with PC61BM and BTP-eC9 as the electron acceptors, respectively. The resulting PSQ-COT:PC61BM OPD exhibited superior detection performance compared with the BTP-eC9 counterpart, achieving an impressive specific detectivity of 1.08 × 10^12 Jones at 1030 nm under zero bias. This enhanced performance is due to the lower degree of energetic disorder and reduced trap density in the PSQ-COT:PC61BM device. Furthermore, we successfully integrated the PSQ-COT:PC61BM OPD into a high-pixel-density image array (640 × 512 pixels), enabling clear matter identification under SWIR light irradiation. This work provides valuable insights into designing high-performance organic semiconductors for SWIR light detection and imaging applications.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509120
The 'Zero-Waste City' initiative, centered on source reduction, resource utilization, and safe disposal of solid waste, aims to minimize environmental impact. To quantitatively assess its carbon reduction contribution, this study took Mianyang as a case, systematically collecting data on solid waste generation, utilization, and disposal across industrial, agricultural, and other sectors from 2021 to 2024. Employing an improved WARM model and emission factor method, and incorporating generation, utilization, and disposal intensities, the carbon reduction benefits before (2021–2022) and after (2023–2024) the initiative were evaluated. Results show that despite significant improvements in comprehensive utilization and safe disposal rates, total solid waste generation increased, leading to a net negative carbon effect of -127.6×10^4 tCO2eq based on absolute quantities. However, after stripping economic and population growth factors, intensity-based accounting revealed a cumulative reduction of 10.8×10^4 tCO2eq, demonstrating significant synergistic benefits. The industrial sector contributed the most, with a reduction of 40.2×10^4 tCO2eq, driven by green transformation and enhanced utilization capacity. Conversely, the rising intensity of domestic solid waste generation resulted in a negative benefit of -46.1×10^4 tCO2eq, highlighting a key area for future improvement. The study underscores the necessity of considering both intensity and absolute quantity dimensions in evaluating rapidly developing cities. These findings provide practical evidence and reference pathways for advancing 'Zero-Waste City' construction and synergistic pollution reduction and carbon mitigation under the 'dual carbon' goals.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025051404
Rubber additives, such as 1,3-diphenylguanidine (DPG) and p-phenylenediamine antioxidants (PPDs), are widely used in the rubber industry and have been increasingly detected in aquatic environments. This study investigated the distribution characteristics and potential sources of seven typical rubber additives (DPG, 6PPD, IPPD, DPPD, CPPD, DNPD, and 77PD) and the transformation product 6PPD-Q in surface water of the Guangzhou section of the Pearl River, China. A total of 29 sampling sites were analyzed. Total concentrations of the target compounds ranged from 205 to 5400 ng·L−1, with a mean of (820±1100) ng·L−1. DPG was the dominant compound in both dissolved and particle phases, accounting for (99±1.9)% and (66±13)% of the total concentrations, respectively. Source analysis indicated that aquaculture, vessel navigation, agricultural runoff, and wastewater treatment plant discharges likely influence the occurrence of rubber additives in this river section. Risk quotient (RQ) assessment revealed that 6PPD-Q posed high ecological risk at all sampling sites (RQ > 1), while DPG exhibited moderate to high risk at most sites (RQ > 0.1). In contrast, 6PPD, IPPD, CPPD, and DPPD showed low ecological risk. These findings highlight the need for heightened attention to the ecological risks posed by 6PPD-Q and DPG in the Pearl River Basin and provide scientific data for pollution prevention and risk management.