SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4432-9
Sodium vanadium phosphate (Na3V2(PO4)3, NVP) with NASICON structure is a promising cathode for sodium-ion batteries but suffers from low electronic conductivity and a high energy barrier for the V4+/V5+ redox couple, limiting practical energy density. A medium-entropy tuning strategy yields the multi-element substituted Na3.2V1.5Cr0.1Fe0.1Mn0.1Ni0.1Ti0.1(PO4)3 (ME-NVP). Entropy modulation tailors the microscopic electronic structure, enabling reversible V4+/V5+ redox at 4.0 V. Analyses reveal a synergistic diffusion mechanism that accelerates Na+ transport and enhances multiple-electron redox kinetics. Ex-situ X-ray diffraction confirms highly reversible structural evolution during cycling. The ME-NVP cathode delivers 116.8 mAh g-1 at 0.1C and retains 83.9% of initial capacity after 1000 cycles at 20C, with excellent performance from -12 to 50 °C. This work demonstrates that configurational entropy regulation unlocks high-energy polyanion cathodes for advanced sodium-ion batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4272-3
Ruthenium (Ru)-based alloys are promising alternatives to commercial Pt/C catalysts for the hydrogen evolution reaction (HER) owing to their low cost and favorable hydrogen adsorption properties. However, the sluggish water dissociation on Ru catalysts remains a major kinetic bottleneck in alkaline solutions. Herein, we report a rare earth (RE) dilute alloy strategy by incorporating a trace amount of cerium (Ce, ~1 at%) into a RuCu alloy to promote interfacial water activation. The oxophilic Ce sites strengthen H2O adsorption and reduce the energy barrier for water dissociation, thereby accelerating the Volmer step during alkaline hydrogen evolution. Consequently, the RuCuCe catalyst delivers 10 mA cm−2 at an overpotential of only 18 mV in 1.0 M KOH and maintains stable operation for over 100 h at 500 mA cm−2 in a membrane electrode assembly. In situ electrochemical impedance spectroscopy and pH-dependent measurements verify the facilitated Volmer process induced by Ce incorporation. Temperature-dependent analysis further shows that the apparent activation energy decreases from 47.4 kJ mol−1 for RuCu to 26.4 kJ mol−1 for RuCuCe, consistent with enhanced water dissociation kinetics. This work establishes RE dilute metal alloys as an effective platform for boosting the intrinsic activity of Ru-based alloy catalysts, in which RE incorporation promotes water dissociation while inducing charge redistribution in the alloy matrix.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3652-2
Existing robotic end-effector gripping technologies often encounter challenges such as poor adaptability to environmental changes, incomplete deformation sensing, and insufficient adhesion stability, which can compromise operational safety and reliability. Here, we present the bio-inspired self-sensing suction cup, in which the core self-sensing capability is achieved by combining high-performance, laser-induced graphene/Ag NWs flexible sensors with a Wheatstone bridge design. The flexible sensors provide high sensitivity, while the Wheatstone bridge circuit enables accurate and stable detection of deformation during the gripping process. Integrated into the octopus-inspired suction cup, this system allows for real-time monitoring of deformation and adsorption stability. The self-sensing suction cup demonstrates good performance across a 0–25 kPa negative pressure range, with outstanding linearity (R2 = 0.993) and high sensitivity (GF = 10.436 kPa−1). Experimental results confirm that the suction cup can achieve stable adsorption under varying loads and enable real-time monitoring of the suction cup status during the gripping process. This design provides a promising solution for intelligent gripping systems, logistics, and object recognition in challenging environments.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025012401
Traditional excitation-emission matrix (EEM) fluorescence spectroscopy suffers from prolonged scanning times, data redundancy, high instrument cost, and bulkiness, hindering rapid on-site water pollution source tracing. This study proposes a novel classification method combining fixed characteristic excitation wavelength scanning with support vector machine (SVM) to enhance efficiency. A total of 180 EEM samples were collected from six pollution source categories: chemical fiber dyeing and finishing, wool textile dyeing and finishing, leather processing, metal surface processing, papermaking, and domestic sewage. Parallel factor analysis (PARAFAC) identified characteristic fluorescent components and excitation wavelengths. Correlation analysis and feature importance analysis further reduced these to seven characteristic excitation wavelengths. SVM and random forest (RF) models were constructed using both the reduced and original EEM datasets. Results demonstrated that models based on the seven characteristic excitation wavelengths maintained high recognition accuracy while significantly improving efficiency. The SVM model achieved the best performance, with runtime reduced from 243.05 s to 34.56 s (an 86% decrease) and recognition accuracy reaching 94.4%. Precision, recall, and F1-score metrics confirmed the robust performance of SVM with characteristic wavelengths, particularly for metal surface processing wastewater. This study provides an efficient and reliable method for rapid water pollution tracing by simplifying EEM scanning and integrating SVM, offering high application value. Future work will optimize feature selection strategies and explore additional sample categories and model combinations to broaden applicability.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202608023
Zinc-containing steel dust sludge, a by-product of steelmaking, contains high levels of chlorine (Cl) along with valuable metals such as Fe, Zn, K, and Na. When recycled into the steel production process, Cl accumulates, causing sintering instability and severe corrosion of blast furnace linings. This study investigated water leaching for Cl removal from zinc-containing steel dust sludge. Under optimal conditions (liquid-to-solid ratio 5 mL/g, temperature 70 °C, time 60 min, rotation speed 160 r/min), the Cl leaching rate reached 87%. Furthermore, a three-stage countercurrent water washing process at a liquid-to-solid ratio of 6 mL/g and room temperature for 45 min achieved a Cl leaching rate exceeding 90%. The water washing also reduced the leaching toxicity of metals in the sludge to a certain extent. Characterization via XRD, SEM, FT-IR, and XPS revealed that water washing primarily dissolved soluble chlorides (NaCl, KCl, etc.), increasing the specific surface area from 2.71 to 10.11 m²/g and average pore size from 12.83 to 16.29 nm. These findings provide theoretical and technical support for efficient Cl removal from zinc-containing steel dust sludge, facilitating its safe resource utilization.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4175-3
The precise manipulation of microdroplets (diameter < 20 μm) on solid substrates is critical for applications in environmental monitoring, targeted drug delivery, clinical diagnostics, and public health. A major challenge is contact angle hysteresis (CAH), which pins droplets and impedes mobility. Here, we introduce a crack-mediated capillary bridging strategy for efficient capture and directional transport of microdroplets. The approach employs a stretchable elastomeric substrate with island-like microstructures. Under longitudinal tensile stress, controlled fracture generates densely packed, directionally oriented surface cracks. These fissures induce localized capillary forces that counteract adhesion-induced resistance, enabling programmable droplet motion. Experiments capturing airborne pathogenic agents demonstrated a 14.2-fold enhancement in enrichment efficiency compared to flat surfaces. This work integrates fracture mechanics with capillary-driven fluid dynamics, establishing a framework for next-generation microfluidic systems. The findings offer promising avenues for biosensing, pollutant analysis, and interdisciplinary applications.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3631-1
Anion exchange membrane water electrolysis (AEMWE) offers cost and dynamic-response advantages over proton exchange membrane systems, yet commercial deployment is constrained by the alkaline stability of anion exchange membranes (AEMs) and the sluggish kinetics of non-precious metal catalysts. This work reports a series of poly(terphenyl-diphenylmethane piperidinium) (QPDPMTP) membranes synthesized with varied diphenylmethane (DPM) content. The alkyl chain of DPM induces pronounced microphase separation and elevates free volume fraction, yielding an OH− conductivity of 152 mS cm−1 at 80 °C for QPDPMTP-10. After 1032 h immersion in 6 M NaOH at 80 °C, the membrane retains 90.7% of its initial conductivity. An AEMWE cell integrating QPDPMTP-10 with a non-precious NiFeCo LDH/NiS/NF anode achieves 3.11 A cm−2 at 2 V in 1 M KOH at 80 °C and sustains 1 A cm−2 for 1800 h under gradient KOH concentration. These results establish a viable pathway for durable, low-cost AEMWE systems.