SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4350-4
Flexible wearable sensors have transformed motion tracking, soft robotics, and human-machine interfaces by enabling precise movement detection and adaptability to curved surfaces. However, conventional composite sensors often face challenges such as limited sensitivity, detection range, linearity, and durability. In this study, we propose a stretchable auxetic sensing textile with a negative Poisson’s ratio (NPR) structure, incorporating reduced graphene oxide (rGO) and carbon nanotubes (CNT) by micro-crack engineering to enhance its mechanical durability and sensing performance. Integrating macro-scale NPR with micro-scale wrinkles, this innovative design achieves a high sensitivity of 11.2 within a wide detection range (0-100%), a more linear sensing range with an R2 value of 0.998, an ultra-low detection limit of 0.5%, and exceptional durability, outperforming conventional wearable sensors. Additionally, the textile sensor boasts excellent moisture permeability (32.7 g m⁻² h⁻¹) and a remarkable NPR value of -0.25, ensuring comfort and adaptability for various wearable applications. Integrated with deep learning algorithms, the auxetic sensing textile demonstrates 98% accuracy in recognizing soft robotic movements at various bending angles. It is capable of capturing both small-scale physiological signals, such as electrocardiograms, and large-scale movements, offering significant freedom of movement and adaptability to complex surfaces.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4206-6
Precise patterning of highly ordered organic semiconductor (OSC) thin-film arrays is critical for next-generation electronics. We report a ladder-like polysilsesquioxane (LPSQ) strategy to synthesize two functional analogs with tunable surface energies and robust dielectric properties. These LPSQ dielectrics, functionalized with alkyl or fluoroalkyl side chains, serve dual roles as gate insulators and patterning layers to guide blade-coating of 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT). This approach yields highly aligned arrays suitable for three-dimensional integration in flexible electronics. Synergistic combination of dense LPSQ dielectric packing and aligned semiconductor domains leads to excellent organic thin-film transistor (OTFT) performance, achieving approximately four-fold improvement in field-effect mobility compared to conventional silicon oxide dielectrics. Patterned LPSQ dielectrics enable high-resolution C8-BTBT patterning on plastic substrates, supporting 4-inch-scale 3D integration of flexible logic circuits, including inverters (voltage gain >100), NOR gates, and NAND gates. This work provides a scalable route to high-performance, large-area flexible organic circuits.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202507029
This study systematically evaluates the environmental risks associated with the resource utilization of municipal solid waste incineration (MSWI) fly ash in the production of aerated concrete, co-prepared with multiple solid wastes. The focus is on the leaching behavior and total content of heavy metals (Cr, Pb, Cd, Cu, Zn) under CO2 curing and chelating agent stabilization. Water washing pretreatment parameters (liquid-to-solid ratio, washing time, ash-to-slag ratio) were optimized for chloride removal. Results demonstrate that CO2 curing suppresses the leaching of most metals; leaching concentrations of Cr, Pb, Cd, and Zn decrease with reduced fly ash content, whereas Cu leaching increases when fly ash is absent. The addition of 17.5% organic sulfur stabilizer (DTC) significantly outperforms inorganic sulfide (Na2S) in immobilizing heavy metals, achieving compliance with national standards without compromising compressive strength or carbon sequestration. Water washing effectively reduces soluble chloride content to below 1% (mass fraction), meeting the HJ 1134-2020 regulatory limit. Optimal parameters include a liquid-to-solid ratio of 5, washing time of 20 min, and a raw material ratio of incineration bottom slag:fly ash:slag = 40:20:40. Under these conditions, the final product exhibits a compressive strength of 1.50 MPa, with heavy metals and soluble chlorides fully compliant. This work provides key technical support for the safe recycling of MSWI fly ash in building materials.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025032004
This study proposes an integrated source apportionment framework that synergistically integrates pollution source classification, atmospheric dispersion modeling, backward trajectory analysis, weighted trajectory clustering, and forward contribution estimation to accurately target peak reduction at localized air pollution hotspots. Applied at the County-Town Scale in Beijing, this method was employed to investigate pollution episodes at the Tongzhou Dongguan monitoring site. Source classification relied on a pollution fingerprint database and temporal concentration profiles, while local contributions were quantified through combined air quality modeling and monitoring data. Forward and backward trajectory analyses enabled the identification of potential source regions and key contributors. Results indicate that construction dust, road dust, and emissions from the catering industry were the dominant local sources, with construction and road dust contributing most prominently to PM2.5 concentrations. Furthermore, abnormal PM2.5 increases were closely linked to low boundary layer height, weak winds, and high humidity, emphasizing the role of meteorological conditions in pollution accumulation. The proposed framework proves effective in pinpointing local pollution sources and offers a scientific basis for targeted air quality management at finer spatial scales.