SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4480-1
Ternary organic solar cells (OSCs) incorporating a structurally compatible guest acceptor (C7-Cl) into the PM6:BTP-eC9 host system are demonstrated. The low Flory-Huggins interaction parameter between host and guest acceptors facilitates intimate mixing, optimizing molecular packing and energy-level alignment. High-sensitivity sEQE and EQEEL analyses reveal a reduced non-radiative energy loss (KE3) of 0.216 eV in the ternary device. Consequently, the optimized ternary OSC achieves a champion power conversion efficiency (PCE) of 20.02% and an improved T80 operational lifetime of 1065 h. This work establishes a feasible strategy via structurally compatible guest doping to simultaneously optimize vertical phase separation and suppress non-radiative loss, providing a facile and effective route toward high-performance and stable OSCs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4260-5
Lithium-sulfur batteries (LSBs) are recognized as a leading candidate for next-generation energy storage due to their high theoretical specific capacity (1675 mAh g⁻¹). However, the shuttle effect of lithium polysulfides (LiPSs) severely limits cycle life and energy efficiency. Here, we report a multi-interface engineering strategy employing a MnO₂-TiO₂@Ti₃C₂ MXene (MT@MX) heterojunction, synthesized via a facile redox reaction between MXene and KMnO₄, to modulate bidirectional polysulfide conversion. The 2D structure with high conductivity and abundant heterogeneous interfaces facilitates fast ion/electron transfer, reduces reaction energy barriers, and enhances adsorption via d-band center effects. The stepped built-in electric field (BIEF) in MT@MX lowers the migration energy barrier of LiPSs from catalytic MXene to TiO₂ and then to adsorptive MnO₂, enabling reversible migration across multi-interfaces. Optimized heterointerfaces synergistically integrate adsorption, diffusion, and catalytic conversion, yielding excellent cycling stability even at a high sulfur loading of 6.4 mg cm⁻². This work demonstrates that constructing heterojunctions with stepped BIEF offers a feasible approach to modulate interfacial diffusion and provides a new design strategy for high-performance LSB electrocatalysts.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4206-6
Precise patterning of highly ordered organic semiconductor (OSC) thin-film arrays is critical for next-generation electronics. We report a ladder-like polysilsesquioxane (LPSQ) strategy to synthesize two functional analogs with tunable surface energies and robust dielectric properties. These LPSQ dielectrics, functionalized with alkyl or fluoroalkyl side chains, serve dual roles as gate insulators and patterning layers to guide blade-coating of 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT). This approach yields highly aligned arrays suitable for three-dimensional integration in flexible electronics. Synergistic combination of dense LPSQ dielectric packing and aligned semiconductor domains leads to excellent organic thin-film transistor (OTFT) performance, achieving approximately four-fold improvement in field-effect mobility compared to conventional silicon oxide dielectrics. Patterned LPSQ dielectrics enable high-resolution C8-BTBT patterning on plastic substrates, supporting 4-inch-scale 3D integration of flexible logic circuits, including inverters (voltage gain >100), NOR gates, and NAND gates. This work provides a scalable route to high-performance, large-area flexible organic circuits.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4322-4
Ultrafast scintillators with low-nanosecond emission are essential for next-generation high-rate X-ray and particle imaging. Although Ce3+-activated scintillators inherently exhibit fast response characteristics, conventional Ce3+-doped hosts rarely achieve low-nanosecond ultrafast decay. Here, we report a high-entropy fluoride scintillator (HEFS), Ce:LaGdCaSrBaF12 (Ce:LGCSB), in the form of bulk single crystals. The severe lattice distortion arising from multi-cation disorder induces exciton localization and effectively suppresses exciton diffusion. Through the rapid relaxation of localized excitons, the high-entropy Ce:LGCSB single crystals deliver a decay time of 1.23 ns with a 94.6% fast-component contribution and without any noticeable slow component. Through first-principles calculations, spectroscopic characterization, and transient dynamics analysis, we reveal that the ultrafast response originates from accelerated Frenkel exciton (FE) recombination enabled by the high-entropy environment. This work establishes entropy-engineered fluorides as promising ultrafast scintillator platforms and proposes a general strategy for extending sluggish diffusion effects to the excitonic scale, offering new opportunities for improving scintillation timing performance.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024083002
Selenium (Se) is an essential trace element for human health, and dietary intake through Se-rich crops is the primary route. However, total soil Se content does not directly reflect the bioavailability to plants, which depends largely on soil available Se. This study, conducted in Shipai Town, Longshan County, Hunan Province, used 1:50,000 land quality geochemical survey data to investigate factors influencing the Se bioaccumulation coefficient in maize kernels. Soil pH, CaO, and MgO were identified as significantly positively correlated with the bioaccumulation coefficient and were selected as proxies for soil available Se. A random forest (RF) model was developed to predict maize grain Se content and assess the feasibility of cultivating Se-rich maize in low-Se farmland. Results showed that although soil Se was deficient, 53.64% of maize grain samples met the Se-rich product standard (0.02–0.30 mg·kg−1). Compared with multiple linear regression, the RF model exhibited higher accuracy and reliability. The RF model predicted that 40.91% of farmland in the study area is suitable for natural Se-rich maize cultivation, representing a 25.86% increase over the area identified by soil total Se alone. This study provides a novel methodological framework for planting natural Se-rich maize in Se-deficient regions, validating the potential for such cultivation.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(25)60629-3
This study reports the synthesis of a novel Z-scheme heterojunction composite film comprising Ag/Bi2MoO6/BiOBr via electrochemical processes, ion-exchange techniques, and subsequent photodeposition of silver nanoparticles. The incorporation of Ag nanoparticles exploits localized surface plasmon resonance (LSPR) effects and serves as an electron mediator, establishing a Schottky barrier that suppresses charge recombination. The optimized 1.5% Ag/Bi2MoO6/BiOBr film achieves a CO production rate of 13.65 μmol/(g·h) from photocatalytic CO2 reduction, significantly outperforming the unmodified Bi2MoO6/BiOBr film. Photocurrent and impedance analyses confirm enhanced charge separation in the Ag-modified composite. A non-linear relationship between Ag loading and photocatalytic efficiency was observed, with optimal performance at 1.5% Ag. The proposed Z-scheme mechanism elucidates the synergistic interactions among components, providing a scientific basis for rational design of advanced photocatalysts and immobilized systems for CO2 reduction. This work offers insights into the development of efficient, sustainable photocatalytic technologies for carbon capture and utilization.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025020603
The high cellulase-producing strains were screened and the enzyme production conditions were optimized, providing strain resources for the effective utilization of agricultural solid waste. A promising cellulolytic strain S3 was isolated from the soil of Hengshui Lake Wetland Park. The isolation process employed Congo red plate staining method for primary screening, followed by secondary screening through cellulase activity determination and straw degradation experiments. Through morphological observation and molecular biology identification, the strain S3 was identified to be Bacillus cereus. The ratio of transparent circle to colony diameter of strain S3 was 4.01±0.17. The filter paper enzyme activity of strain S3 was 42.09 U·mL−1, and the degradation rate of corn stover reached 19.29% after 10 days of fermentation. It was found that the optimum carbon source of strain S3 was the mixture of microcrystalline cellulose and wheat bran with the addition amount of 4%, and the optimum nitrogen source was soybean powder with the addition amount of 2%. Single factor experiment and response surface methodology were used to optimize the enzyme production conditions of the strain S3. The optimal conditions were fermentation time of 76 h, fermentation temperature of 36℃, initial pH of 6, and inoculation volume of 4%. Under these conditions, the filter paper enzyme activity reached 60.13 U·mL−1, which was 1.43 times higher than that before optimization. The strain S3 showed the high cellulase-producing capability, demonstrating its potential as an efficient microbial candidate for the degradation and utilization of agricultural solid waste.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.3724/2097-213X.2025.JFCT.0035
Iron-based catalysts in CO2/H2 atmospheres undergo dynamic carburization and oxidation phase transitions, complicating active-phase identification and stability control. This study prepared high-purity single-phase χ-Fe5C2 (Hägg carbide) and θ-Fe3C (cementite) via gas-solid carburization, with purity confirmed by XRD and Mössbauer spectroscopy. Fixed-bed reactor tests (H2/CO2 = 1, 0.1 MPa, 270–420 °C), pulse experiments (270 °C), and in situ XRD (10% CO2/He, 340 °C) were employed to investigate catalytic performance and structural evolution in the reverse water-gas shift (RWGS) reaction. Results show that χ-Fe5C2 exhibits higher RWGS activity but is more susceptible to oxidation, whereas θ-Fe3C demonstrates superior oxidation resistance but lower activity. Under RWGS conditions with H2, θ-Fe3C partially transforms into χ-Fe5C2; however, in 10% CO2 atmosphere, both carbides directly oxidize to Fe3O4 without inter-carbide transformation. In situ XRD at 340 °C and 0.1 MPa revealed that χ-Fe5C2 fully oxidizes within 11 h, while θ-Fe3C retains residual phase after 18.3 h, confirming its higher oxidation stability. These findings elucidate the atmosphere-dependent evolution mechanisms of χ-Fe5C2 and θ-Fe3C, providing experimental basis for phase-structure regulation and operational stability optimization in iron-based Fischer-Tropsch and RWGS catalysts.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202607018
To address the dual challenges of phosphorus resource scarcity and eutrophication control, this study proposed a sustainable waste-treats-waste strategy by preparing red-mud-modified sludge-based biochar (RMSBC) via co-pyrolysis of red mud and sewage sludge. The optimal material (RMSBC800), produced at 800 °C with a red mud-to-sludge mass ratio of 3:1, achieved a maximum phosphorus adsorption capacity of 28.57 mg/g, a 350% enhancement over unmodified biochar (SBC). Characterization (SEM, XRD, EDS, FT-IR, XPS) revealed that red mud modification increased the average pore size from 7.91 nm to 20.33 nm, reduced electronegativity, and raised the pH at point of zero charge (pHpzc) from 2.01 to 3.37. Adsorption kinetics followed the pseudo-second-order model, and isotherms fitted the Langmuir model, indicating monolayer chemisorption. The Freundlich parameter 1/n was 0.34, suggesting favorable adsorption. Mechanistic studies identified electrostatic attraction and surface precipitation as dominant, with molecular dynamics simulations confirming the critical role of Fe3O4 over Fe2O3 in adsorbing HPO4^2- due to stronger electrostatic interactions. The material retained 61% of its initial capacity after five regeneration cycles and achieved 83% phosphorus removal from real wastewater. This work demonstrates synergistic valorization of industrial wastes, offering an economically viable solution for phosphorus pollution control and resource recovery.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60762-1
The CO2 dry reforming of methane (DRM) is pivotal for CO2 utilization within the dual-carbon framework, offering advantages in carbon reduction and value-added chemical production. However, shaped catalysts suitable for industrial-scale DRM remain limited. This work constructs a monolithic catalyst using honeycomb cordierite as the structural support, systematically investigating the effects of organic and inorganic binders on coating structure and catalytic performance. Comparative studies reveal that the active coating fabricated with inorganic aluminum sol exhibits a continuous uniform morphology and excellent adhesion strength. During high-temperature calcination, elemental diffusion within Al2O3 networks bridges the cordierite surface with active catalyst particles, forming a (Ni-Mg)AlxO4 composite structure. This creates robust metal-support interactions between active sites and the residual alumina matrix. The interconnected mesoporous framework provides superior pore confinement, contributing to strong coating adhesion, enhanced activity, and improved resistance to carbon deposition in the monolithic m-NCM-Al-sol catalyst. In contrast, coatings derived from inorganic silica sol suffer from detachment and activity loss due to heterogeneous surface structures and poor adhesion. Organic binders demonstrate inferior performance in macroscopic coating uniformity, adhesion strength, mesoporous confinement, and localized electronic effects, resulting in the poorest catalytic performance. By optimizing aluminum sol coating parameters—binder content, active component dosage, and coating cycles—a synergistic balance between coating thickness and mass transfer is achieved. The optimized catalyst demonstrates excellent DRM performance, providing insights for constructing high-performance shaped catalysts with cordierite coatings.