SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3623-y
Organic light-emitting diodes (OLEDs) are an advanced technology for full-color displays, yet the low efficiency of blue OLEDs remains a critical bottleneck. Here, we report a new strategy to design robust Pt(II) emitters with enhanced molecular rigidity and increased locally excited character. The resulting Pt(II) emitter exhibits an extremely narrow emission spectrum peaking at 458.6 nm with a full-width at half-maximum (FWHM) of 16.0 nm and a small Huang-Rhys factor of 0.278, together with a high photoluminescence quantum efficiency of 95%. When doped into an OLED, the device emits at 464 nm with high color purity (FWHM = 19 nm) and achieves high external quantum efficiencies (EQEs) of 32.6%, 29.4%, and 26.9% at luminances of 123, 1000, and 5000 cd/m2, respectively. Notably, the device attains a record-high maximum brightness of 84,895 cd/m2 among reported deep-blue OLEDs with Commission Internationale de l'Éclairage (CIE) y-coordinate < 0.15. This work demonstrates one of the highest-performing deep-blue OLEDs reported to date, addressing the dual challenges of efficiency and brightness in this spectral region.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3860-0
Drug detection is critical for public health and security, yet reversible and highly sensitive sensing materials remain scarce. This study presents a novel ionogel sensor material, poly(ethylene glycol) diacrylate (PEGDA)/1-butyl-3-methylimidazole tetrafluoroborate, for reproducible detection of N-methylphenylethylamine (MPEA), a structural analogue of methamphetamine. The ionogel is fabricated by immobilizing a flowable ionic liquid within a PEGDA network via UV curing, preserving ionic mobility for efficient conduction. Integrated on a flexible poly(ethylene naphthalate) substrate, the sensor exhibits over 72.6% transmittance in the visible spectrum, enabling concealed attachment. Utilizing non-covalent interactions, the sensor achieves reproducible MPEA detection at sub-ppb levels at room temperature, with a theoretical detection limit of 317 ppt. It demonstrates high selectivity and consistency. Ionic conductivity was confirmed via current-voltage tests and impedance spectroscopy, and the sensing mechanism was clarified. The device maintains reliable performance under bending, indicating suitability for dynamic environments. With Bluetooth integration for wireless data transmission, the sensor shows strong potential for practical, discreet drug monitoring in real-world applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3697-8
Multi-site coupling is a promising strategy for developing highly efficient and CO-resistant hydrogen oxidation reaction (HOR) catalysts for proton exchange membrane fuel cells (PEMFCs). However, designing multifunctional synergistic schemes for single-atom sites remains a significant challenge. Herein, we propose a dual-template-confined oxophilic engineering strategy to construct well-dispersed iridium-nickel (IrNi) atomic dimers adjacent to IrNi nanoclusters on porous nitrogen-doped carbon (IrNi Dimer/NC1.8-PNC). The paired IrNi dimer features an asymmetric Ir-N3 configuration coordinated with heteroatomic Ni-N3O via an N-bridge. Remarkably, IrNi Dimer/NC1.8-PNC exhibits a ~23-fold enhancement in mass activity (4.36 A mg−1 Ir at 20 mV) and 5-fold longer stability compared to benchmarking Pt/C toward HOR, while achieving a high rated power density of 1.18 W cm−2 in PEMFC anode applications. Furthermore, IrNi Dimer/NC1.8-PNC demonstrates superior CO tolerance over monometallic Ir and Pt/C in both half-cell and full-cell devices. Combined experimental and density functional theory studies reveal that oxophilic Ni modulates the electronic environment of Ir through alloying and dimer interactions, thereby enhancing HOR activity. Importantly, the asymmetric IrNi dimer enables efficient CO* and OH* co-adsorption while facilitating CO2* desorption, synergistically mitigating CO poisoning and improving atom utilization efficiency. This work provides a design strategy and fundamental insights for multi-site synergistic catalysts in PEMFC anodes.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202508004
Industrial processes generate substantial low-grade waste heat and cold, which can be harnessed via thermoelectric generators (TEGs) based on the Seebeck effect. However, the low-voltage output of TEGs poses application challenges. This study investigates a TEG-driven electrodeposition system for efficient treatment of low-concentration copper-containing wastewater from electroplating, integrated circuit, and energy industries. The TEG system, comprising two series-connected semiconductor modules, achieved a maximum power of 0.36 W at a temperature difference (ΔT) of 130 °C. Optimal operating parameters for the coupled system were determined: ΔT = 90 °C, counter-current flow (two-side inlet), flow rate of 20 mL·min⁻¹, initial Cu²⁺ concentration of 500 mg·L⁻¹, and electrode gap of 0.7 cm. Under these conditions, after 60 min of electrodeposition, copper removal efficiency reached 99.42%, current efficiency was 67.93%, and the energy conversion efficiency of the TEG-electrodeposition system was 36.96%. The system also treated real copper-containing wastewater, achieving 95.83% removal within 100 min. Characterization via SEM, XRD, and XPS revealed that the electrodeposited product consisted of metallic copper and cuprous oxide, with metallic copper accounting for approximately 60%. This work provides a promising approach for utilizing industrial waste heat and cold to achieve low-energy, high-efficiency treatment of heavy metal wastewater.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025010201
The Guanzhong region, traversed by the Wei River Basin, is one of the most industrially, agriculturally, and medically advanced and densely populated areas in Northwest China, has seen increasing attention paid to the pollution of perfluoroalkyl substances (PFASs) in its surface water environment. This study systematically investigated the pollution characteristics of PFASs in the surface water of this region and their ecological and health risks. By optimizing the online solid-phase extraction-liquid chromatography-tandem quadrupole mass spectrometry (Online SPE-LC/MS/MS), efficient detection of 19 PFASs was achieved, with the method detection limits ranging from 0.2 ng·L−1 to 0.3 ng·L−1, linear correlation coefficients all ≥ 0.990, and spiked recoveries between 75.2% and 130.0%. Monitoring data indicated that PFBA, PFPeA, PFHxA and PFOS, short-chain perfluorinated compounds, were the main pollutants in this region, with high detection frequencies and concentrations, but the overall content was lower than that in most areas of China. The concentrations of PFASs in surface water showed significant seasonal variations, with the highest concentrations during the dry season (∑19PFASs:126.1 — 2584.3 ng·L−1), followed by the normal season (∑19PFASs:3.5—3567.6 ng·L−1), and the lowest during the wet season (∑19PFASs:26.3—294.6 ng·L−1). Ecological risk assessment showed that, except for PFDoDA in the dry season, the ecological risk quotient (RQ) of all other PFASs was < 1. Although the water of the Wei River is not used as direct drinking water, health risk assessment indicated that all PFASs posed low risks, with only PFOA and PFOS showing potential risks (HR > 0.1) to adults and children at some sites during dry/normal seasons. This study provides a scientific basis for PFASs pollution control in the Wei River Basin.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510013
To investigate the spatiotemporal distribution of nutrients and chlorophyll-a (Chl-a) in Dongping Lake, a coupled hydrodynamic-water quality-ecological model was developed using Delft3D. The model simulated total nitrogen (TN), nitrate nitrogen (NO3-N), ammonia nitrogen (NH4-N), total phosphorus (TP), soluble reactive phosphorus (SRP), and Chl-a. After validation, the model systematically analyzed the spatiotemporal patterns and influencing factors, revealing nitrogen and phosphorus transformation pathways. Results showed three temporal phases: relatively stable concentrations from January to April, significant fluctuations from May to August, and gradual stabilization from September to December, with peak timing varying among indicators. Spatially, concentrations were generally higher in the south and lower in the north, but NH4-N, TP, and Chl-a exhibited reverse patterns (higher in north) during certain periods. External inputs, primarily from the Dawen River, dominated the overall distribution, while water temperature, dissolved oxygen, and hydrodynamic conditions further modulated internal variability. Nitrogen and phosphorus showed distinct fates: nitrogen was primarily removed via denitrification and anammox, whereas phosphorus tended to transform into particulate forms and remained in the lake for extended periods. These findings provide scientific support for precise water quality management in Dongping Lake.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4118-0
Polymer composite dielectrics are key materials for high-temperature film capacitors, yet their energy storage capability is severely constrained at elevated temperatures. Molecular fillers that simultaneously integrate deep-level trapping (high electron affinity, Ea), strong insulation (large bandgap, Eg), and high thermal stability are rarely available, posing a major challenge for improving high-temperature energy storage performance. To address this challenge, we screen and identify hexaazatriphenylene hexacarbonitrile (HAT-CN) as a promising candidate that fulfills the above critical requirements from numerous commercial organic molecules. When incorporated into a high glass transition temperature (Tg) polymer fluorene polyester (FPE), the resulting all-organic composite exhibits simultaneously suppressed high-temperature conduction loss and preserved mechanical robustness. Consequently, the optimized composite achieves record-high discharged energy densities of 7.31 J cm−3 at 150 °C and 6.14 J cm−3 at 200 °C (η≥90%) with a low cost and scalable process. This work demonstrates that the filler design based on synergistic key properties provides a potent pathway to break the longstanding high-temperature performance bottleneck in polymer dielectrics.