SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3558-4
The development of advanced titanium alloys capable of operating above 600 °C remains a critical challenge for aerospace propulsion systems, where conventional Ti alloys suffer from insufficient high-temperature strength and microstructural instability. Here, we propose a computationally driven design strategy for titanium-based medium-entropy alloys (MEAs) that integrates thermodynamic phase prediction with mechanistically informed strength modeling, enabling systematic exploration of the Ti-Nb-Al-Cr quaternary system. The optimized Ti70Nb10Al15Cr5 MEA exhibits exceptional performance metrics: 18% room-temperature ductility (as-cast), a yield strength of 520.7 MPa at 650 °C (post-aging), and an ultralow density of 4.76 g/cm3 (45% lighter than Inconel 718). Microstructural characterization reveals a metastable single-phase BCC structure in the as-cast state, which transforms into a BCC/Ti3Al dual-phase system upon aging, with temperature-dependent precipitate morphology and phase stability. The alloy demonstrates superior high-temperature strength retention up to 900 °C (>80 MPa yield strength), outperforming commercial titanium alloys (e.g., Ti-1100, TG6) and bridging the performance gap between conventional Ti alloys and nickel-based superalloys. This work establishes a multi-criteria design paradigm for entropy-engineered alloys, offering a viable pathway to lightweight, high-temperature structural materials for next-generation aerospace applications.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3664-x
The proliferation of electronic devices and wireless communications has escalated the demand for materials that simultaneously provide electromagnetic interference (EMI) shielding and infrared (IR) thermal camouflage, a combination critical for military and civilian applications. Traditional metallic shields suffer from high density, poor processability, and cost, while polymer-based alternatives often lack sufficient shielding effectiveness and environmental stability. Here, we report a multilayer composite film fabricated via layer-by-layer vacuum filtration and hot-pressing, integrating modified aramid nanofibers (ANF) and MXene (Ti3C2Tx) nanosheets. The film architecture comprises ANF-polypyrrole (ANF-PPy) as the matrix and Ag-MXene as the functional filler, with in-situ grown Ag nanoparticles intercalating between MXene layers to enhance interlayer spacing and electromagnetic wave scattering. At a thickness of only 33 μm, the film achieves an average EMI shielding effectiveness (SE) of 66.75 dB and a specific shielding effectiveness (SSE/t) of 38432.54 dB cm2 g−1. The multilayer structure promotes multiple internal reflections and interfacial polarization losses, while the tight integration ensures high IR reflectivity. This work establishes a foundation for developing multifunctional protective materials with dual EMI shielding and IR camouflage capabilities, addressing the critical bottleneck of simultaneous performance in ultrathin, flexible formats.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3666-2
Light-emitting electrochemical cells (LECs) are promising for low-cost, solution-processed display and lighting applications, yet achieving high efficiency and color purity remains challenging. Here, we report two ionic multi-resonance (MR) emitters with narrowband blue emission for high-color-purity LECs. By covalently bonding an imidazolium functional group into a boron/nitrogen-doped polycyclic skeleton, the emitters retain the narrowband emission and high photoluminescence quantum yield (PLQY) of the MR core while gaining ionic character. The design exploits two types of nitrogen atoms in the imidazolium unit: the pyrrolic N at the 1-position forms a para-B-π-N linkage, elevating excited-state energy levels and blue-shifting emission; the pyridinic N at the 3-position provides a quaternization site, yielding intrinsically ionic emitters compatible with ionic hosts. The emitters exhibit blue emission with narrow full-width at half-maximum of 26–27 nm and high PLQYs of 95%–97% in solid-state films. LECs based on these emitters achieve narrowband blue electroluminescence with CIE coordinates of (0.12, 0.26) and a maximum external quantum efficiency (EQE) of 4.6%, representing the first narrowband blue LECs based on intrinsically ionic MR emitters. This work demonstrates a viable molecular design strategy for high-color-purity LECs, addressing the long-standing trade-off between efficiency and color purity in this technology.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3679-8
Idiopathic pulmonary fibrosis (IPF) is a chronic interstitial lung disease with high mortality and limited therapeutic options. Dysregulated macrophage polarization drives fibroblast activation and epithelial-mesenchymal transition (EMT), yet no effective management exists. Here, we develop an inhalable methane nanocapsule (MNC) that spatiotemporally controls methane release in the lung to remodel the fibrogenic microenvironment. MNC is formulated via self-assembly of biodegradable poly(lactic-co-glycolic acid)-polyethylene glycol (PLGA-PEG) and a novel acid-responsive methane prodrug Fe(BPY)2(CH3)2, enhancing mucosal penetration and sustained methane release in acidic inflammatory niches. In a bleomycin (BLM)-induced pulmonary fibrosis model, MNC inhalation achieves efficient lung deposition and sustained methane release, significantly reducing inflammation, ameliorating fibrosis, and improving lung function without systemic side effects. Mechanistically, MNC rebalances macrophage polarization by inhibiting M2 phenotype overexpression and downregulates the MMP9/TIMP-1 ratio to suppress myofibroblast proliferation and EMT, synergistically halting fibrotic progression. This inhalable methane nanocapsule offers a promising strategy for safe and effective IPF treatment.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604013
Reclaimed water serves as an alternative water source for replenishing natural water bodies, yet residual pollutants pose ecological risks. A pilot-scale hybrid vertical flow constructed wetland filled with manganese ore sand, quartz sand, and cobblestones was operated for approximately 140 days to assess nutrient and organic matter removal, ecotoxicity, and the suitability of manganese sand as a functional medium. Influent concentrations were up to 0.4 mg/L ammonia, 0.2 mg/L phosphate, 8 mg/L nitrate, and 30 mg/L COD. After 2–3 months of operation, ammonia and phosphate removal efficiencies exceeded 90% and 80%, respectively. Average reductions for nitrate and COD were 0.67 mg/L and 4.2 mg/L. Manganese sand enhanced organic decomposition, reducing maximum 3D fluorescence intensity by 26%, humic substances by 48%, UV254 by 38%, and achieving 70.8% removal of four target antibiotics. Purified water exhibited no significant genotoxicity, with micronucleus rates approaching tap water levels, and non-concentrated samples showed no acute biotoxicity. However, concentrated samples displayed acute toxicity, suggesting different causative pollutants for genotoxicity and acute toxicity. The study supports manganese sand as an effective medium for improving reclaimed water quality and controlling ecological risks.