SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4312-8
Carbazole phosphonic acid-based self-assembled molecules (SAMs) serve as effective hole-selective contacts in organic solar cells (OSCs), yet their molecular packing and aggregation behavior during solution processing remain difficult to control, limiting hole transport and device durability. This study introduces a polymer-templated self-assembly strategy to regulate molecular organization by one-step spin-coating a blend of [2-(9H-carbazol-9-yl)ethyl]phosphonic acid (2PACz) and PEDOT:PSS. The polycationic PEDOT+ framework acts as a template, providing supplementary anchoring interactions that promote ordered molecular arrangement and suppress unfavorable agglomeration. Pronounced face-on orientation and enhanced structural coherence of 2PACz within the polymer matrix are evidenced. The templated ordering improves vertical charge transport, interfacial homogeneity, and film morphology. In binary OSCs based on PM6:BTP-eC9, the hybrid hole transport layers (HTLs) yield a champion power conversion efficiency (PCE) of 20.26%, with an open-circuit voltage (VOC) of 0.874 V, a short-circuit current (JSC) of 28.97 mA cm-2, and a fill factor (FF) of 80.02%. Devices incorporating hybrid HTLs exhibit exceptional operational stability, retaining over 90% of initial PCE (T90) after 405 h of continuous operation at the maximum power point (MPP). This work establishes polymer-directed SAM assembly as a scalable route to simultaneously optimize nanoscale molecular packing, interfacial energetics, and long-term device stability for high-performance OSCs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3775-3
The urgent imperative for carbon-neutral chemical production has accelerated the development of solar-driven catalytic technologies that convert abundant C1 feedstocks (CO2 and CH4) into value-added C2+ molecules. Standalone photocatalysis remains constrained by rapid charge-carrier recombination and poor C–C coupling selectivity. This review critically examines multi-field-coupled catalysis—a transformative paradigm synergistically integrating solar energy with auxiliary thermal, electric, and magnetic fields. Through mechanistic dissection of photothermal, photoelectrochemical, and photomagnetic field cooperativities, it is summarized that thermal gradients attenuate phonon scattering to enhance charge-carrier drift mobility while vibrationally stabilizing reactive intermediates, electric potentials drive vectorial charge transport via Coulomb-force-directed separation and band alignment, and magnetic fields modulate spin-selective electron transfer through Zeeman splitting-mediated polarization to boost reaction specificity. This synergistic multi-field integration circumvents intrinsic limitations of single-mode photocatalysis by collectively reconfiguring reaction coordinates for selective C–C coupling. We further address persistent challenges in resolving ultrafast interfacial charge-transfer dynamics, scaling integrated field reactors for industrial deployment, and advancing in situ operando characterization of multiscale processes. Strategic research priorities are proposed to advance sustainable multi-field-coupled catalytic production of fuels and platform chemicals.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3698-5
The oxygen evolution reaction (OER) is a critical bottleneck in next-generation sustainable energy systems due to its sluggish kinetics. Developing cost-effective, high-efficiency electrocatalysts requires understanding the dynamic structural evolution at electrode-electrolyte interfaces under operating conditions. In situ techniques are invaluable for identifying active centers and monitoring key intermediates. This review comprehensively summarizes recent advances in cutting-edge in situ methods for characterizing OER electrocatalyst structure evolution. It provides a brief overview of active motifs and robust structures using multiple in situ correlative techniques, establishing essential structure-performance relationships and updating mechanistic understanding at atomic scale under realistic conditions. Key challenges and perspectives are highlighted to promote rational design of promising electrocatalysts for efficient oxygen-associated electrocatalysis and electrosynthesis.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4054-x
The sluggish kinetics and high onset potentials of the oxygen evolution reaction (OER) at the anode of alkaline water/seawater electrolyzers limit overall energy efficiency. Noble-metal oxides like RuO2 are active but suffer from high cost, agglomeration, and dissolution under oxidizing potentials, especially in chloride-rich electrolytes where competing chloride oxidation reaction (ClOR) occurs. Here, we report a mild two-step dry-wet milling strategy to achieve throughout lattice doping of F− into MnO2 (F-MnO2) and subsequent anchoring of atomically dispersed Ru via Ru–O/F hybrid bonds. The strengthened Mn 3d–O/F 2p hybridization and negative charge shielding of surface F− enhance OER activity/selectivity relative to ClOR and impart superior Cl− tolerance and corrosion resistance. The resulting F-Ru-MnO2-TH electrocatalyst exhibits overpotentials of 280 mV and 200 mV at 10 mA cm−2 in alkaline water and simulated seawater, respectively. It retains ~100% of initial activity after 200 h continuous operation in alkaline media and >95% after 300 h in simulated seawater, significantly outperforming Ru-MnO2 and commercial RuO2. This work provides a scalable route to durable, high-performance OER catalysts for seawater electrolysis.
Journal of Fuel Chemistry and Technology•2026•DOI: 10.1016/S1872-5813(26)60642-1
Inherent minerals significantly influence the thermal conversion of coal, yet the interaction mechanisms among minerals affecting tar generation during pyrolysis remain unclear. This study investigates the effect of acidic mineral components on the behavior of ion-exchangeable Ca2+ during coal pyrolysis. Coal samples were prepared via HCl and HCl-HF acid washing followed by Ca2+ ion exchange. Pyrolysis was conducted in a fixed-bed reactor. Acid washing effectively reduced ash content but also decreased organic element contents (carbon, hydrogen). Loading ion-exchangeable calcium enhanced the thermal weight loss rate in the 500–550 °C range, shifting the peak temperature from 530 °C to 514 °C. At a final pyrolysis temperature of 600 °C with slow heating, kaolinite in acidic minerals underwent dehydroxylation to form metakaolin. The content of small aromatic rings (<6 rings) in char from Ca-loaded coal was lower than that from acid-washed coal without Ca. Coexistence of acidic minerals with ion-exchangeable Ca increased aliphatic hydrocarbon content in tar: YL-HCl-Ca reached 21.98% versus 13.60% for YL-De-Ca. Acidic mineral components inhibit the adverse effect of ion-exchangeable Ca2+ on tar lightening. These findings provide insights into mineral interactions during pyrolysis, aiding in optimizing coal conversion processes for improved tar quality.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511055
To systematically investigate the spatiotemporal distribution of hydrodynamics and water quality under cascaded hydropower development in the upper Heihe River, a MIKE21-based water environment model was constructed for the mountainous reach. The model simulated the dynamic changes of total phosphorus (TP), total nitrogen (TN), and ammonia nitrogen (NH3-N) from January to August 2023. Calibration and validation against field data showed good performance: the hydrodynamic model achieved a coefficient of determination (R2) of 0.89 and a mean relative error (MRE) of 11.3%; the water quality model achieved an average R2 of 0.86 and an average MRE of 14.21%. Hydrodynamic simulations revealed average flow velocities of 1.78, 0.72, and 0.36 m·s−1 during wet, normal, and dry periods, respectively. Natural river sections exhibited high velocities up to 4.3 m·s−1, while reservoir sections had near-stagnant flow due to hydraulic structures. Water quality simulations indicated that TN and NH3-N concentrations were higher in dry and normal periods, whereas TP was higher in the wet period. Spatially, concentrations in reservoir sections exceeded those in natural sections: natural sections had TP, TN, and NH3-N concentrations of 0.07–0.10, 0.25–0.50, and 0.025–0.250 mg·L−1, respectively, while reservoir sections had 0.12–0.17, 0.60–0.80, and 0.10–0.45 mg·L−1. These findings provide scientific references for water environment management in the Heihe River and similar inland river basins.