SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4246-5
Developing organic solar cells (OSCs) processable from green solvents without additives or post-treatments is essential for sustainable manufacturing, yet high power conversion efficiency (PCE) remains difficult due to limited morphology control. Herein, we develop a new electron-deficient building block, dithiazolo[4',5':3,4;5'',4'':5,6]benzo[1,2-d][1,2,3]triazole (DTzBT), which fuses benzo[d][1,2,3]triazole (BTA) with thiazole to leverage S/N-mediated non-covalent interactions, enhance planarity and lower the HOMO. To isolate side-chain effects, two DTzBT-based donors, namely PTzMe-F (N-methyl) and PTzEH-F (N-2-ethylhexyl), have been designed and synthesized. PTzMe-F exhibits poor solubility and miscibility with L8-BO, yielding 2.64% PCE (chloroform). PTzEH-F exhibits excellent processability and favorable morphology, delivering 17.61% PCE (chloroform) and 19.17% as-cast from toluene without any additive or post-treatments. In addition, the ternary LbL device based on PTzEH-F/L8-BO:PC71BM achieved an impressive efficiency of 20.27%. Comprehensive characterization indicates that 2-ethylhexyl side chains afford optimal solubility while preserving strong intermolecular interactions and favorable phase separation. DTzBT mitigates BTA’s HOMO-raising tendency via electron-withdrawing thiazole fusion, reconciling aggregation tunability with energy-level control. These results show that precise backbone and side-chain co-design enables green-solvent, additive-free processing for high-performance OSCs, advancing sustainable photovoltaic manufacturing.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4134-6
Oral leukoplakia (OLK) is a prevalent premalignant lesion with malignant transformation risk. Current adhesive hydrogels lack lesion-specific adhesion and precision therapy. We synthesized DNA hydrogels via co-crosslinking of thiolated gelatin and thiolated oligonucleotide through disulfide bonds, incorporating Mn2+ and chlorin e6 (Ce6) via thiol-metal coordination and physical entrapment. Low-frequency ultrasound (LFUS) anchored complementary oligonucleotides onto the lesion surface, enabling site-specific bioadhesion through base pairing. Under high-frequency ultrasound (HFUS), Ce6 generated reactive oxygen species, triggering mitochondrial DNA (mtDNA) release in hyperproliferative epithelial cells. Concurrent HFUS accelerated Mn2+ release, potentiating cGAS recognition of cytosolic mtDNA and activating the cGAS-STING pathway. This induced dendritic cell maturation, priming naïve T cells into cytotoxic T lymphocytes, reversing the immunosuppressive microenvironment. The modality induced immunological memory, restraining OLK recurrence and impeding malignant transformation. This study introduces the first DNA-directed hydrogel bioadhesion strategy and proposes unprecedented cGAS-STING pathway-associated immunotherapy against OLK.
The Chinese Journal of Process Engineering•2026•DOI: 10.12034/j.issn.1009-606X.225184
Thermal power units have long dominated China's energy structure due to the low cost of coal and their role in ensuring grid stability. However, under the dual pressures of climate change and national carbon peaking/neutrality goals, the environmental impact of their 'three wastes' has become critical, necessitating energy-saving retrofits. This review systematically examines mainstream energy-saving technologies for thermal power units, including boiler combustion optimization, heating surface cleaning, turbine flow path upgrades, waste heat recovery and cascade utilization, and cold-end system optimization. Using coal consumption rate as the core economic index, the study integrates case studies and operational data from typical domestic and international units to evaluate the latest progress, practical effects, advantages, and limitations of each technology. Results indicate that these technologies significantly improve energy efficiency and reduce pollution. For instance, boiler combustion optimization based on support vector machines and neural networks enhances thermal efficiency and reduces NOx emissions. Turbine flow path modifications, from full three-dimensional CFD optimization to advanced blades and combined steam seals, yield notable gains in cylinder efficiency and heat rate reduction. Low-temperature economizers reduce coal consumption and auxiliary power/water use in dust removal and desulfurization systems. Heat pump applications include absorption, compression, and hybrid types. In cold-end optimization, data-driven predictive maintenance and real-time performance tuning of condensers achieve nearly 50% energy savings in circulating water pumps and an average coal consumption reduction of 2-3 g/(kW·h). Despite these advances, gaps remain in multi-objective optimization robustness, intelligent diagnosis, and advanced materials. Future research should focus on deep reinforcement learning for adaptive control, sensor networks for real-time diagnostics and predictive maintenance, and high-temperature corrosion-resistant materials for heat exchangers, while balancing initial investment and maintenance costs.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3470-6
Inkjet printing of two-dimensional transition metal chalcogenides (TMDs) is promising for low-cost, large-scale flexible electronics, yet challenges persist due to poor crystallinity and toxic solvents. Here, we report a green ink formulation using zwitterionic cocamidopropyl betaine (CAB) as a dispersant and surfactant for liquid-phase exfoliation of single-crystalline TMDs in water and isopropanol (IPA). The dispersions contain no additives or binders, enabling direct production of stable (over one month) and concentrated (2 mg/mL) inks for MoS2, MoTe2, WS2, WSe2, and WTe2. Fully-printed MoSe2/CAB humidity sensors exhibit superior sensitivity (ΔI/I0 = 468.1) and rapid response/recovery times (27 s/0.42 s) under bending. Inkjet-printed WTe2/CAB pads on 6-μm-thick substrates demonstrate exceptional mechanical stability, with resistance variations of 1.4% under single bending and 2% after 1,000 cycles, and acquire high-quality electrocardiogram (ECG) and electromyography (EMG) signals. This strategy enables scalable fabrication of TMD-based flexible electronics, advancing industrial integration.