SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3642-4
High-density glass scintillators are promising alternatives to crystals for next-generation radiation detection due to their low cost, excellent physical and chemical stability, and processability. In this study, a series of Ce3+-activated gadolinium gallium borosilicate (GGBS x) glasses were synthesized via vacuum melt-quenching. With increasing Gd2O3 content, glass density increased from 5.86 to 6.05 g/cm3, and molar volume from 36.43 to 39.79 cm3/mol. Extended X-ray absorption fine structure (EXAFS) analysis revealed that in GGBS 1 glass, Ce3+ exclusively adopts a hexahedral [CeO6] configuration, while Gd3+ exhibits both hexahedral and octahedral coordination with a bond length of 2.35±0.1 Å and Debye-Waller factor σ2 of 0.0122±0.0015 Å2. As Gd2O3 content increased, shallow trap depth rose from 0.804 to 0.858 eV, while deep trap depth first increased from 0.948 to 1.434 eV then decreased to 1.010 eV. GGBS 1 glass exhibited high transmittance (~80%) in the visible range and a photoluminescence quantum yield of 78.4%. Under X-ray irradiation, its X-ray excited luminescence intensity reached 128.5% of that of Bi4Ge3O12 (BGO) crystal, with a spatial resolution of 29.1 lp/mm, approaching the highest reported for glass scintillators. Under γ-ray excitation, it achieved a light yield of 1058 photons/MeV and an energy resolution of 23.7% at 662 keV. These results indicate that GGBS 1 glass scintillator warrants further development for applications in X-ray imaging and γ-ray spectroscopy.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61102-X
Silicon-carbon composites prepared by chemical vapor deposition (CVD) are promising anode materials for high-energy-density lithium-ion batteries. However, the influence of the pore structure of the porous carbon (PC) carrier on silicon deposition behavior, and the impact of surface silicon on cycling stability, remain unclear. This study systematically investigates these effects using nitrogen adsorption-desorption analysis, X-ray photoelectron spectroscopy, and thermogravimetric analysis. Porous carbons with varying pore architectures were synthesized by adjusting KOH activator ratios. Results show that increased micropore volume facilitates higher silicon mass loading, but also elevates the content of surface floating silicon due to greater silane exposure. Moderately increasing mesopores in high-microporosity carbon promotes deeper silicon deposition, reducing surface floating silicon. Excessive surface floating silicon hinders lithium-ion diffusion kinetics, leading to accumulation of active lithium, accelerated SEI growth, and electrode degradation. Electrochemical testing reveals that the optimized silicon-carbon composite maintains a high specific capacity of 693.1 mAh/g after 150 cycles at 0.5 C (900 mA/g). This work provides new insights into the development and failure mechanisms of CVD-derived silicon-carbon composite anodes, emphasizing the critical role of pore structure in mitigating surface silicon and enhancing cycling stability.
Environmental Chemistry•2026•DOI: 10.0000/202605-2
Surface sediment samples were collected from 28 stations in the intertidal zones of Xiangshan Harbor, Sanmen Bay, and the southern coast of Hangzhou Bay, major fishery waters in Ningbo, to assess heavy metal pollution and ecological risk. Concentrations of Cu, Pb, Zn, Cd, Cr, Hg, and As were determined. Results showed that Cu and Cr were the primary超标 factors, with mean concentrations exceeding the Class I standard (GB 18668-2002) by factors of 1.03 and 1.1, respectively, in Xiangshan Harbor; in Sanmen Bay, Cr exceeded by 1.1 times, while Cu did not. In Hangzhou Bay, Cu and Cr were elevated but below the standard. Coefficients of variation (CV) for five metals in Hangzhou Bay exceeded 30%, indicating strong external influence. In Xiangshan Harbor, As showed strong variation, and in Sanmen Bay, Hg showed strong variation. The potential ecological risk indices (RI) were 38.5, 36.7, and 31.1 for Xiangshan Harbor, Sanmen Bay, and Hangzhou Bay, respectively, all indicating low ecological risk. Spatial distribution in Hangzhou Bay revealed a decreasing gradient from a chemical industrial park, suggesting industrial discharge as a primary source. The study provides baseline data for environmental management and recommends source control and bioremediation in high-risk areas.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511021
Phosphate-solubilizing microorganisms (PSM) can immobilize cadmium (Cd) by dissolving insoluble phosphates and inducing the precipitation of stable Cd-phosphate minerals. However, the low bioavailability of soil phosphorus and the relatively low Cd2+ concentrations often limit the efficiency of microbial-induced phosphate precipitation (MIPP). This study proposed a combined strategy using the phosphate-solubilizing bacterium Klebsiella aerogenes Wn (Wn) and hydroxyapatite (HAP) to enhance Cd immobilization in paddy soil. Pot experiments were conducted to evaluate the effects on soil Cd availability and rice grain Cd accumulation, and the underlying mechanisms were investigated. Results showed that the combined treatment stabilized soil pH between 5.8 and 6.7 and electrical conductivity between 66 and 290 μS·cm−1, while increasing available phosphorus by 4%–67%. The optimal treatment (T4: 8 g·kg−1 HAP + 3.75×10^9 cfu·kg−1 Wn) reduced soil available Cd by 40.2% and decreased rice grain Cd to 0.0699 mg·kg−1, which is 65% below the national food safety limit. Microbial community analysis confirmed successful colonization of Wn. Pure culture experiments demonstrated that Wn induced phosphate precipitation, forming a more stable cadmium hydroxyapatite mineral [Ca3.9(Ca4.7Cd0.7)(PO4)6(OH)1.8]. The combined Wn-HAP treatment is an efficient strategy for remediating Cd-contaminated farmland, with significant potential for ensuring agricultural product safety and promoting soil remediation.