SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3538-6
The understanding of anion transporting behaviors under sub-nanoconfined regimes can guide the design of high-performance anion selective membranes (ASMs), yet it is little known. Here, we build membrane channels that combine physical rigidity with chemical affinity to anions simply through bridging graphene oxide nanosheets with charged linkers. We observe that the rigidly confined interaction imposed by channels to anions can reconfigure hydration shells in varying degrees for different anions via compensating for hydration-induced energy barriers and differentiating their rearrangement behaviors. During the configuration evolution, water molecules within hydration shells would rotate and simultaneously change their distance from the ion center. Based on the big discrepancy in configuration evolution, these membranes can realize ultrahigh selectivity of, for example, 125 for Cl−/SO4^2− and surpass the performance upper bound concerning Cl−/SO4^2− separation by other membranes. The knowledge of the configuration change of hydration shells during the dehydration process will be key to designing next-generation ASMs.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025122101
Phenolic compounds, widely used in petrochemical, textile, and pharmaceutical industries, pose severe risks to ecosystems and human health due to their toxicity and persistence. Traditional Fe2+-mediated Fenton oxidation, while effective, suffers from external H2O2 and Fe2+ addition, low H2O2 utilization, narrow pH adaptability, and iron sludge generation. This study develops a g-C3N4-based heterogeneous photo-Fenton system that operates without external H2O2 or Fe2+ salts, exhibiting a wide pH range and minimal iron sludge. The synthesized Fe3O4@UiO/IKCN catalyst, under visible light, selectively reduces dissolved oxygen to H2O2 via a two-electron pathway and activates it to hydroxyl radicals (·OH), achieving efficient degradation of phenolic compounds. The integration of photocatalytic H2O2 formation and Fenton activation enables sustained production of oxidative species, demonstrating superior performance at circumneutral pH. This work provides new insights into the rational design of heterogeneous Z-scheme photo-Fenton catalysts and offers experimental and theoretical support for photocatalytic H2O2 synthesis and phenolic wastewater treatment.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604023
Fly ash, a byproduct of coal combustion, poses severe environmental challenges. This study synthesizes A- and H-type zeolites from fly ash via hydrothermal treatment and evaluates their adsorption performance for low-concentration acidic gases (SO2, CO2, NO) at 1000 mg/m3. The zeolites exhibited pore sizes of 3–5 nm, with specific surface areas of 18.59 m2/g (A-type) and 22.32 m2/g (H-type). At 20 °C, A-type zeolite achieved maximum saturated adsorption capacities of 1.07 mmol/g for SO2, 0.26 mmol/g for CO2, and 0.048 mmol/g for NO; H-type zeolite showed higher capacities: 1.12, 0.29, and 0.053 mmol/g, respectively. In-situ DRIFTS revealed that T–O (T=Si/Al) groups serve as key active sites, with adsorption energies for A-type zeolite calculated as -5.11 kJ/mol (SO2), -4.07 kJ/mol (CO2), and -1.41 kJ/mol (NO). Kinetic analysis indicated conformity to the Arrhenius equation. The results demonstrate that fly ash-based zeolites are promising adsorbents for acidic gas removal, with H-type outperforming A-type due to larger surface area and more silanol sites. This work provides a theoretical basis for utilizing fly ash in gas purification, contributing to the circular economy.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511062
Sediment microbial fuel cells (SMFCs) are a green technology for simultaneous polluted sediment remediation and energy recovery, yet their performance is constrained by insufficient anodic microbial activity and low electron transfer efficiency. This study employed lactate addition combined with composite engineered microbial immobilization to synergistically optimize SMFC performance by enhancing microbial stability and carbon source supply. Results showed that lactate, as an easily utilized electron donor, promoted electrochemical activity, achieving a maximum power density of 22.06 mW·m−2 at 6 mmol·L−1, a 194% improvement over the blank group. Immobilization further enhanced electron transfer efficiency, with the highest output voltage (88.75 mV) being 2.09 times that of the non-immobilized group. For pollutant degradation, the 6 mmol·L−1 lactate group achieved TOC and TN removal rates of 29.02% and 28.4%, respectively, outperforming the control (22.41% and 21.42%). However, high lactate concentrations inhibited microbial metabolism, leading to TOC accumulation. 16S rRNA analysis revealed that the anodic microbial community was dominated by Bacillota and Pseudomonadota, both possessing electroactive and pollutant-degrading capabilities, indicating that lactate and immobilization exert a synergistic effect in SMFCs, simultaneously enhancing electricity generation and pollutant removal efficiency.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4059-3
Deuterium (D2) is indispensable for isotope tracing, neutron scattering, and fusion reactions, yet its separation from hydrogen (H2) remains challenging due to their nearly identical physicochemical properties. Adsorptive separation exploiting the kinetic quantum sieving (KQS) effect at cryogenic temperatures offers a promising route, but demands precise pore engineering. Here, we report a biomass-derived carbon molecular sieve that permits rapid D2 transport while imposing a significant diffusion barrier for H2, enabling effective separation from D2/H2 mixtures. The molecular sieving micropores are generated by transforming cellulose components into slit-type carbon micropores, with lignin acting as a pore-size modifier. At 77 K, the diffusion rate of D2 is 1.8 times that of H2, leading to a D2 concentration in the recovered gas approximately 10% higher than that achieved with conventional microporous carbons. Aspen adsorption simulations demonstrate that D2 can be enriched to 90.1% from a 1.0% D2/H2 mixture within 12 successive cycles following a two-bed cryogenic pressure swing adsorption process. These findings advance the development of effective adsorbents for kinetic D2/H2 separation, offering a sustainable, low-cost route to deuterium enrichment.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3587-4
Unstable zinc interfaces arising from dendrite growth and parasitic reactions impede the practical deployment of rechargeable aqueous zinc-ion batteries. This study introduces 1-(2-pyridylazo)-2-naphthol (PAN) as a parts-per-million (ppm) level electrolyte additive to stabilize the Zn anode. Theoretical and experimental analyses reveal that PAN undergoes parallel adsorption on the Zn surface, establishing strong π-π interactions between adjacent molecules that efficiently repel water. The OH, pyridine N, and azo N groups in PAN chelate Zn2+, modulating Zn2+ diffusion and promoting uniform deposition while suppressing dendrite formation. A 10 ppm (0.04 mM) PAN addition extends the lifespan of a symmetrical cell to 1500 h at 2 mA cm−2 and 1 mAh cm−2. The Zn||Cu half-cell achieves a Coulombic efficiency of 99.91% over 3500 cycles at 5 mA cm−2 and 1 mAh cm−2. Full cells with NH4V4O10 and MnO2 cathodes exhibit enhanced cycling stability. Notably, a Zn||NH4V4O10 pouch cell retains 71.1% capacity after 250 cycles at 0.8 A g−1. This work demonstrates a viable strategy for selecting high-efficiency additives for aqueous metal-based batteries.