SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4320-4
Colloidal lead halide perovskite quantum dots (Pe-QDs) have achieved external quantum efficiencies exceeding 20% in red, green, and blue light-emitting diodes (LEDs), yet their integration into high-resolution displays is impeded by two persistent bottlenecks: the intrinsic ionic lability of Pe-QDs, which compromises structural and environmental stability, and the absence of mild, high-fidelity patterning techniques that avoid ligand detachment and surface defect formation. This work addresses both obstacles through a dual strategy. First, a ligand-fluoride co-stabilization method yields shape-defined, colloidally stable rhombic dodecahedral CsPbBr3 Pe-QDs; subsequent fluorine surface reconstruction using tetrabutylammonium fluoride (TBAF) enhances ligand binding affinity, producing BHOA+F CsPbBr3 Pe-QDs with a photoluminescent quantum yield (PLQY) of 94.6%. Accelerated ageing, ultraviolet irradiation, and thermal cycling tests confirm improved structural and environmental stability. Second, capillary liquid-bridge confined assembly enables reproducible, scalable fabrication of pixelated Pe-QDs with in-plane long-range order, vertical confinement, and precise spatial patterning. The resulting pixelated Pe-QDs LEDs exhibit high efficiency, sufficient brightness, and long operational stability, with the approach generalizable across red, green, and blue Pe-QDs for wide color gamut displays. This combination of surface fluorination and liquid-bridge assembly represents a landmark achievement in high-resolution display technology.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3706-3
Aprotic lithium-oxygen (Li-O2) batteries are severely limited by slow cathode reaction kinetics and large polarization. Herein, we design and prepare a Mott-Schottky catalyst by uniformly embedding ultrafine Ru nanoparticles on nitrogen-doped carbon (Ru@NC) nanoflakes to accelerate oxygen redox kinetics of Li-O2 batteries. The Mott-Schottky effect of Ru@NC drives spontaneous electron rearrangement in the NC matrix and induces a strong built-in electric field at heterointerfaces, which accelerates the activation and conversion of oxygen intermediates. The obtained Ru@NC possesses rich Mott-Schottky heterointerfaces and defective carbon structures, which provide extensive adsorption and nucleation sites. More importantly, Ru@NC manifests moderate affinity for the intermediate LiO2, inducing formation of unique nanosheet-like Li2O2 with low Li2O2/cathode interfacial impedance, which further enhances oxidation kinetics. These enable the Li-O2 battery with Ru@NC to deliver a remarkably reduced polarization of 0.89 V, superior rate performance, and prolonged lifespan of over 200 cycles. This work will provide valuable guidelines for engineering advanced electrocatalysts for high-performance Li-O2 batteries and beyond.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3727-0
Lead halide perovskites are promising scintillators for X-ray imaging due to high X-ray absorption efficiency, excellent luminescence, and facile synthesis. However, their ionic nature challenges simultaneous high photoluminescence efficiency and environmental robustness. This work introduces a multilevel encapsulation strategy: CsPbBr3 quantum dots (QDs) are sequentially coated with Cs4PbBr6, SiO2, and polydimethylsiloxane (PDMS). Cs4PbBr6 passivates surface defects, while SiO2 and PDMS provide barriers against moisture, heat, and radiation. The resulting CsPbBr3@Cs4PbBr6/SiO2/PDMS flexible films exhibit a photoluminescence quantum yield (PLQY) of 85%, outstanding mechanical flexibility, and durability under stretching, bending, and compressing. Films retain emission stability under elevated temperatures, prolonged X-ray irradiation, and extended water immersion. X-ray imaging demonstrates spatial resolution of 12 lp/mm, enabling distortion-free imaging of curved objects; superior water resistance allows long-term underwater imaging. This work highlights hierarchical encapsulation in balancing luminescence efficiency and stability, offering a pathway toward practical flexible perovskite scintillators.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3956-0
Chiral organic-inorganic hybrid metal halides (OIHMHs) are multifunctional materials with structural diversity and chiroptical properties. However, current chiral OIHMHs predominantly exhibit circularly polarized luminescence (CPL) in the visible spectrum, while ultraviolet and near-infrared (NIR) CPL remains challenging. Here, we report lead-free chiral zero-dimensional (0D) OIHMHs, (R/S-DACH)2In2Br10:Sb3+/Yb3+ (DACH = 1,2-diaminocyclohexane), featuring spectrally tunable CPL emissions covering visible to NIR regions. Single-crystal X-ray diffraction, circular dichroism, and CPL spectroscopy revealed that robust hydrogen-bonding interactions between organic cations and inorganic emitters are crucial for chirality expression. Sb3+-doped (R/S-DACH)2In2Br10 single crystals exhibited intense broadband emission at 644 nm from the 3P1 to 1S0 transition of Sb3+, achieving a record photoluminescence quantum yield (PLQY) of 49.9% (two orders of magnitude higher than pristine crystals) and a luminescence dissymmetry factor (glum) of ±7.1×10−3. Notably, Sb3+/Yb3+ co-doped crystals simultaneously generated dual-band CPL at 644 nm (glum = ±2.1×10−2) and 994 nm (glum = ±6.8×10−3), representing an important example of NIR-CPL in OIHMHs. An LED device based on (R-DACH)2In2Br10:2.7%Sb3+ exhibited bright orange emission with a color-rendering index of 78.4 and excellent spectral and operational stabilities. These findings establish a design strategy for broadband CPL and expand applications of chiral metal halides in advanced optoelectronics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3901-2
This work presents a cracked template and vacuum metal evaporation strategy for fabricating structurally randomized copper (Cu) mesh films. Regulating the internal stress distribution within the coating during template cracking enables controlled fabrication of Cu mesh films with varying discrete degrees of mesh aperture area and distinct probability distributions of metal line inclination. The influence of structural parameter randomization on properties was systematically investigated, encompassing higher-order diffraction energy homogenization, optoelectronic performance, and electromagnetic interference shielding effectiveness (EMI SE). Results demonstrate that increasing structural randomization effectively suppresses higher-order diffraction energy, achieving a reduction to −3.93 dB in normalized higher-order diffraction energy. Furthermore, the Cu mesh film exhibited minimal degradation on imaging system performance, with resolution decreasing only marginally from 80.6 to 71.8 lp/mm. Simultaneously, the most randomized Cu mesh film demonstrates an ultra-low sheet resistance (3.31 Ω/sq), high visible light transmittance (88.7% at 550 nm), an exceptional figure of merit (FoM=913.69), and robust EMI SE within the X-band (average SE of 33.18 dB). These findings underscore that metal mesh films incorporating structural randomization offer an effective strategy for enhancing EMI shielding in high-performance optoelectronic imaging systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4011-7
Biomass-derived room-temperature phosphorescence (RTP) carbon dots (CDs) hold great promise for anti-counterfeiting and information encryption. However, achieving solid-state matrix-free long-lived CDs with time-dependent phosphorescence colors (TDPC) remains challenging due to aggregation-induced quenching. Here, solid-state matrix-free RTP phosphorus-doped CDs (P-CDs) are developed via one-step hydrothermal treatment of feather powder and phytic acid. The resulting P-CDs powder exhibits bright blue fluorescence under UV illumination and unprecedented TDPC shifting from yellow to green after UV removal, with afterglow lasting 12 s (average lifetime 1.15 s). Enhanced RTP is attributed to increased triplet-state excitons via spin-orbit coupling induced by P-doping. A dual-mode luminescent ink formulated by combining P-CDs with polyvinyl alcohol (PVA) is successfully applied to commercial A4 paper, showing pronounced TDPC (light-yellow to green) with improved RTP lifetime (1.31 s) after ceasing UV irradiation. The P-CDs/PVA ink demonstrates excellent anti-counterfeiting and information encryption capabilities, outstanding luminescent durability, and broad practicability on cellulosic substrates including fabric and paper. These findings provide a strategy for exploiting matrix-free solid-state RTP P-CDs with distinctive TDPC properties and offer a sustainable route to converting feather wastes into high-value materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4060-5
Organic solar cells (OSCs) offer unique advantages for wearable electronics due to their light weight and mechanical flexibility. However, achieving both high optoelectronic performance and mechanical robustness in organic semiconductors remains challenging, compromising the efficiency and durability of stretchable OSCs. Here, we report a cross-linked conjugated polyelectrolyte (CPE)-polyoxometalate (POM) anode interlayer (AIL), PTN-POM, constructed via strong electrostatic interactions between ammonium groups and POM. The PTN-POM film exhibits an electrical conductivity of 3.30×10−3 S/m and high stretchability, significantly outperforming the classic PEDOT:PSS AIL in mechanical strength. Binary OSCs modified with PTN-POM achieve a power conversion efficiency (PCE) of 19.59%, the highest reported for OSCs using a cross-linked AIL. Notably, PTN-POM enables fabrication of water-proof OSCs that show no performance degradation after underwater storage for 42 days. Furthermore, stretchable OSCs incorporating PTN-POM demonstrate enhanced mechanical robustness, retaining 81% of initial PCE under a large tensile strain of 50%. This work significantly enhances the photovoltaic, waterproof, and mechanical properties of OSCs, advancing their potential for wearable photovoltaics.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4088-y
Silicon nitride (Si3N4) is a strong, thermally stable covalent ceramic typically regarded as brittle with limited deformability. Recent experimental and density functional theory (DFT) studies indicate that the α/β interface undergoes a β→α transformation via sliding followed by bond-switching, suggesting a pathway to achieve plasticity, but DFT's spatiotemporal reach prevents a full mechanistic picture. Here, we develop a physics-informed high-accuracy neural network interatomic potential (NNAP) model with DFT-level accuracy for phase transformations and use it to perform large-scale atomistic simulations. NNAP-guided simulations show that structural relaxation during relative sliding between α- and β-phases at the interface triggers pronounced atomic-layer rearrangements and lowers the energy barrier by nearly 60%. We further find that the ensuing phase transformation does not proceed by isolated layer-by-layer switching but instead follows in-plane nucleation and growth mediated by a bilayer cooperative mechanism, which further reduces kinetic barriers and facilitates the transformation. CI-NEB calculations reveal that the bilayer cooperative pathway has an energy barrier of 0.018 eV/Ų, lower than the independent layer-by-layer manner (0.020 eV/Ų), indicating enhanced kinetic accessibility. These results provide new atomistic insights into interface-driven phase transformations in dual-phase Si3N4 and offer guidance for designing more deformable covalent ceramics.