SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4249-2
Underwater bubble manipulation is critical for water electrolysis, heat transfer, and mineral flotation, yet existing strategies relying on buoyancy or Laplace gradient forces from asymmetric surface geometries suffer from limited flexibility and narrow applicability. This work introduces a temperature-responsive anisotropic cilia surface (TRAS) that achieves bidirectional long-range bubble transport by modulating elastic modulus and stiffness. The TRAS enables precise control over the asymmetric three-phase contact line and viscous resistance, facilitating reversible bubble motion. Experimental validation using aqueous ethanol droplets with varying surface tensions (73.16 mN/m for 0 vol% to 22.27 mN/m for 100 vol%) on cilia with center-to-center spacings of 0.2–1.0 mm reveals that transport direction depends on both cilia spacing and liquid surface tension. Droplets of 0 vol% and 20 vol% ethanol exhibit sustained reverse transport on hard cilia, while 60 vol%, 80 vol%, and 100 vol% solutions show sustained forward transport. Notably, 40 vol% ethanol droplets display bidirectional transport at 0.6 mm spacing, reverse transport at 0.8 and 1.0 mm, and forward transport at 0.2 and 0.4 mm. These results demonstrate that tuning surface tension and cilia spacing provides a versatile platform for directional bubble manipulation, with promising applications in heat transfer, electrochemistry, and gas handling systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3947-3
Fiber photodetectors (FPDs) with high deformability, flexible designability, and seamless integrability with everyday textiles hold tremendous potential for next-generation wearable optoelectronics. Inorganic semiconductors (ISCs) are considered ideal building blocks to design and govern the functions of FPDs owing to their superior electrical and optical properties. Recent developments in wearable technology of ISCs, especially in fiber form factor, have driven the creation of various FPDs with smart capabilities, from light sensing, information interfacing, to sophisticated logic operating, revolutionizing human-machine interaction paradigms in many emerging fields. Herein, we present a comprehensive review of recent progress of ISC-based FPDs. Firstly, key design principles for ISC-based FPDs are explored, encompassing material selection, fabrication technologies, device architectures, and textile integration strategies. Then, how defect engineering, alignment engineering, and heterojunction engineering of ISCs can control the optoelectronic performance of FPDs is examined. Following this, potential wearable applications of ISC-based FPDs in optical communication, image sensing, and health monitoring are analyzed. Finally, the challenges and perspectives for the design of high-performance ISC-based FPDs are outlined.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510084
The rapid expansion of lithium battery industries has elevated lithium resources to strategic importance, yet lithium extraction generates 8–10 tons of slag per ton of lithium salt, with complex heavy metal content and high leaching risks. This study improves conventional alkali activation by employing a composite activator and multi-stage thermal assistance to achieve self-solidification of lithium slag, simultaneously immobilizing multiple heavy metals while producing high-strength materials. Under full slag conditions, the mechanical strength of solidified materials ranged from 3.48 to 8.25 MPa; after optimization, strength increased by 137.07%. Average immobilization rates for various heavy metals rose from 97.26% to 99.77%. In simulated acidic, alkaline, neutral, high-salt, acid rain, and leachate environments, efficient immobilization was maintained, with leachate concentrations below regulatory limits. The improved activator and thermal process reduced structural defects, promoted formation of the key Si-O-Al framework, and ensured structural integrity, enhancing both mechanical strength and heavy metal immobilization. The cost of slag solidification was approximately 185–200 CNY per ton, significantly lower than conventional methods, with low energy consumption, no high-temperature calcination, and reduced equipment and reagent requirements, supporting scalability.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202510060
Wastewater treatment plant (WWTP) effluent is a significant pathway for emerging contaminants (ECs) to enter natural water bodies. This study investigated the removal of ECs by two field-scale gravel-based constructed wetlands: a horizontal subsurface flow constructed wetland (QL-CW) and a surface flow constructed wetland (BL-CW), both treating actual WWTP effluent. The influence of operation mode and wetland plant type on EC removal was examined. Using liquid chromatography-mass spectrometry, principal component analysis, and ecological risk assessment, the removal efficiencies and mechanisms for various ECs were explored. In QL-CW, biodegradation was more pronounced, particularly via ammonia-oxidizing bacteria co-metabolism, favoring ECs with benzyl, secondary amine, secondary amide, tertiary amide, halogenated, and carboxyl functional groups. In BL-CW, electrostatic attraction and hydrophobic interactions were more significant, with plant and root-microorganism uptake and adsorption playing key roles. Surface flow mode achieved significantly higher removal of antibiotics (45.3% vs. 34.1%) compared to horizontal subsurface flow, while no significant differences were observed for non-antibiotic pharmaceuticals (66.6% vs. 64.4%) and pesticides (49.8% vs. 34.2%). Planting Cyperus alternifolius (windmill grass) was more beneficial for antibiotic removal (43.6% vs. 30.1%) than planting Ipomoea aquatica (water spinach). The wetlands effectively reduced the ecological risks of most ECs to marginal levels. This study provides insights into the deep treatment of ECs in WWTP effluent by constructed wetlands.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4003-7
The escalating electromagnetic (EM) pollution necessitates the development of high-performance microwave absorbers (MAs) with integrated functionalities. However, it is still a difficult problem to integrate more related high performances into the designed MAs. Herein, a sustainable strategy was reported for fabricating three-dimensional (3D) porous magnetic Ni@C-anchored carbon foams (Ni@C/CFs) with abundant heterointerfaces and magnetic Ni@C nanoparticles using 3D porous chitosan foams and Ni-nitrilotriacetic acid chelate (Ni-NAC) as precursors. The modulation of carbonization temperature and concentration of Ni-NAC solution contributed to the tunable carbon graphitization, Ni crystallinity and magnetic Ni@C nanoparticles loading, which effectively improved their EM properties and EM wave absorption performances (EMWAPs). The optimized 3D porous magnetic Ni@C/CFs not only exhibited exceptional EMWAPs with a minimum reflection loss (RL min) of −27.58 dB and an ultra-wide effective absorption bandwidth (EAB) of 7.20 GHz, but also presented efficient thermal insulation and strong antibacterial activity (>95% inhibition against E. coli), which mainly originated from their excellent magnetic-dielectric synergies and unique 3D hierarchical porous structures. Consequently, this work delivers a coherent design strategy for next-generation multifunctional absorbers with potential applications in EM protection, thermal management, and adaptive stealth technologies.