SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4324-4
Magnesium-oxygen (Mg-O2) batteries offer high theoretical energy density and low-cost earth-abundant magnesium, yet practical deployment has been impeded by poor cycling stability and low energy efficiency, primarily due to the sluggish decomposition of conventional MgOx discharge products. Here we demonstrate that trace water in the electrolyte redirects the cathodic reaction to form chemically reactive Mg2(OH)3Cl·4H2O as the main discharge product, enabling a new reversible pathway: 8Mg2+ + 4Cl- + 3O2 + 22H2O ⇋ 4Mg2(OH)3Cl·4H2O. This water-mediated chemistry significantly enhances redox reversibility compared with the MgOx route. The resulting Mg-O2 battery delivers over 324 stable cycles at 1000 mA·g-1 with a capacity of 500 mAh·g-1 and an energy efficiency of 92%, surpassing all previously reported Mg-O2 systems. The electrolyte comprises 0.25 M magnesium bis(trifluoromethanesulfonyl)imide (Mg(TFSI)2) and 0.5 M magnesium chloride (MgCl2) in ethylene glycol dimethyl ether (DME) with a trace amount of water. These findings establish a general strategy for reversible Mg-O2 electrochemistry and provide a new design paradigm for practical magnesium-based energy storage.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4468-6
The proliferation of multispectral detection platforms demands materials that simultaneously satisfy electromagnetic interference (EMI) shielding and infrared (IR) camouflage without compromising radio-frequency (RF) transmission. Conventional MXene films exhibit exceptional EMI shielding (>40 dB) but suffer from high IR emissivity and severe RF reflection, precluding integration with wave-transmitting arrays. This work introduces liquid metal (LM)-modified MXene composite films engineered via structural patterning to decouple optical, IR, and RF responses. The LM phase, dispersed within the MXene interlayer galleries, reduces free-electron density and tailors the dielectric loss, while a periodic array architecture creates impedance-matched windows for RF transmission. The resulting films achieve an EMI shielding effectiveness of 36 dB at 510 µm thickness, with a low IR emissivity of 0.36 and an RF transmittance exceeding 80% in the X-band. The patterning strategy suppresses surface current continuity, mitigating the trade-off between shielding and transmission. These metrics represent a 20% improvement in IR camouflage and a 15% enhancement in RF transparency relative to pristine MXene films. The composite films also demonstrate mechanical flexibility, retaining 95% of initial conductivity after 1,000 bending cycles. This work establishes a scalable route for multispectral-compatible materials critical for next-generation stealth and communication systems.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3805-1
The sluggish kinetics of oxygen reduction and evolution reactions (ORR/OER) at the air electrode impede the practical deployment of fiber zinc-air batteries (FZABs) for wearable electronics. Conventional bifunctional catalysts suffer from an inherent activity trade-off due to the distinct mechanisms of ORR and OER. Here, we propose a spatial decoupling strategy to overcome this limitation by engineering isolated Fe single atoms and Fe–Ir dual-atom pairs on a nitrogen-doped carbon matrix (Fe/FeIr-NC). In this architecture, Fe single atoms serve as ORR centers, while Fe–Ir pairs with tunable spacing are tailored for OER, enabling complete functional separation and independent optimization. The catalyst exhibits an ORR half-wave potential of 0.91 V and an OER overpotential of 250 mV at 10 mA cm−2, yielding a record-low bifunctional gap (ΔE = 0.57 V) that outperforms all reported single- and dual-atom catalysts. A flexible fiber zinc-air battery based on this catalyst delivers a peak power density of 3920 W kg−1, along with a 1.4-fold increase in energy efficiency and a 2.6-fold extension in cycle life compared to the commercial Pt/C + IrO2 benchmark. This work not only breaks the traditional activity trade-off in bifunctional catalysis but also offers a promising route toward high-performance power sources for wearable electronics.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202604023
Fly ash, a byproduct of coal combustion, poses severe environmental challenges. This study synthesizes A- and H-type zeolites from fly ash via hydrothermal treatment and evaluates their adsorption performance for low-concentration acidic gases (SO2, CO2, NO) at 1000 mg/m3. The zeolites exhibited pore sizes of 3–5 nm, with specific surface areas of 18.59 m2/g (A-type) and 22.32 m2/g (H-type). At 20 °C, A-type zeolite achieved maximum saturated adsorption capacities of 1.07 mmol/g for SO2, 0.26 mmol/g for CO2, and 0.048 mmol/g for NO; H-type zeolite showed higher capacities: 1.12, 0.29, and 0.053 mmol/g, respectively. In-situ DRIFTS revealed that T–O (T=Si/Al) groups serve as key active sites, with adsorption energies for A-type zeolite calculated as -5.11 kJ/mol (SO2), -4.07 kJ/mol (CO2), and -1.41 kJ/mol (NO). Kinetic analysis indicated conformity to the Arrhenius equation. The results demonstrate that fly ash-based zeolites are promising adsorbents for acidic gas removal, with H-type outperforming A-type due to larger surface area and more silanol sites. This work provides a theoretical basis for utilizing fly ash in gas purification, contributing to the circular economy.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3634-0
Messenger RNA-lipid nanoparticle (mRNA-LNP) vaccines have demonstrated extraordinary efficacy against severe acute respiratory syndrome coronavirus 2, establishing LNPs as the premier platform for mRNA therapeutics. However, the pervasive presence of anti-polyethylene glycol (PEG) antibodies undermines PEGylated LNP performance by diminishing therapeutic efficacy. To address this challenge, we synthesized a panel of lipid-poly(2-oxazoline) (lipid-POx) conjugates as alternatives to lipid-PEG and systematically evaluated how their polymer backbone, degree of polymerization, and lipid tail structure influence LNP physicochemical properties and mRNA delivery performance. Among POx-LNPs formulated with heptadecan-9-yl 8-((2-hydroxyethyl)(6-oxo-6-(undecyloxy)hexyl)amino)octanoate (SM-102) as the base lipid, those constructed with single-tailed C18-POx exhibited smaller particle sizes and superior freeze-thaw stability. These C18-POx-LNPs maintained comparable in vivo transfection efficiency to PEG-LNPs even when fully replacing 1,2-dimyristoyl-sn-glycero-3 (DMG)-PEG. Notably, in mice bearing pre-existing anti-PEG antibodies, C18-POx-LNPs demonstrated over 200-fold higher transfection efficiency than PEG-LNPs. Additionally, repeated administration of POx-LNPs induced dose-dependent anti-POx immunoglobulin M (IgM) and IgG responses, with antibody titers inversely correlated with POx hydrophilicity. This study underscores the effectiveness of substituting PEG with POx in LNP construction to address the transfection efficiency in populations with pre-existing anti-PEG antibodies, and would inspire the development of more hydrophilic polymers for LNP formulation.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025012002
Acid orange 7 (AO7), a recalcitrant azo dye, poses significant threats to aquatic ecosystems and human health. This study investigates the activation of urea-hydrogen peroxide (UHP) by iron-modified corn straw biochars (Fe-CSBs) for AO7 degradation. Fe-CSBs were synthesized via impregnation-pyrolysis at 300, 500, and 700 °C using ferrous sulfate as modifier. The oxidative removal efficiencies of AO7 by Fe-CSB-activated UHP were compared, and the effects of Fe-CSB dosage, UHP dosage, initial AO7 concentration, initial pH, and coexisting anions (CO3^2−, HCO3^−, Cl^−) were systematically examined. Quenching experiments identified reactive oxygen species, and LC-MS analysis determined degradation intermediates. Results showed that all Fe-CSBs effectively activated UHP, achieving degradation rates of 98.54%, 97.38%, and 98.54% for Fe-CSB300, Fe-CSB500, and Fe-CSB700, respectively, under optimal conditions (0.2 g·L−1 UHP, 0.2 g·L−1 Fe-CSB, 20 mg·L−1 AO7, pH 3, 60 min). CO3^2− and HCO3^− inhibited degradation, while Cl^− had negligible effect. The primary reactive species were hydroxyl radicals (·OH) and singlet oxygen (^1O2). Degradation proceeded via cleavage of the azo bond, forming benzene-containing intermediates, which underwent deamination, desulfurization, and oxidation to smaller organics, ultimately mineralizing to CO2 and H2O. This work provides insights into UHP-based advanced oxidation processes for dye wastewater treatment.