SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4294-4
Room-temperature phosphorescence (RTP) polymer materials are attractive for flexible electronics and information encryption due to their tunability and processability. However, achieving polymeric RTP systems that simultaneously exhibit high thermal sensitivity, reversible multicolor emission, and long phosphorescence lifetime (τPhos) with high quantum yield (ΦPhos) remains challenging. Here, we report an in-situ cross-linked self-assembly strategy that converts flexible polymers into rigid polymer microspheres, yielding long τPhos, high ΦPhos, and thermally and time-dependent tunable RTP. The resulting microspheres (PM0.1-0.01-1) exhibit a maximum τPhos of 1754 ms and ΦPhos of 42.83%, markedly superior to previously reported intrinsic polymer RTP materials. At 77 K, they display ultralong green emission with a lifetime of 6019 ms and visible afterglow lasting up to 99 s. The cross-linked microspheres enable time-dependent, continuously tunable RTP and thermally responsive color switching, while maintaining excellent phosphorescence stability in aqueous and high-temperature environments. This provides a versatile platform for dynamic information encryption, full-color afterglow LEDs, and temperature sensing. The strategy establishes a general design principle for developing multidimensional, controllable, and stable high-performance polymer RTP materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4138-5
Electrocoagulation (EC) has emerged as a promising electrochemical technology for wastewater treatment, offering distinct advantages over conventional chemical coagulation and membrane processes. This review systematically summarizes recent advancements in EC, focusing on the underlying mechanisms, key operating parameters, and diverse technical applications. The EC process involves three stages: electrolytic oxidation and in-situ coagulant formation, destabilization of contaminants, and floc formation. Unlike chemical coagulation, EC requires no external chemical additives, and process control is achieved by adjusting current density, voltage, or electrode materials, enabling adaptation to varying wastewater qualities. The review highlights the influence of dissolved organic matter (DOM) on EC efficiency, as clarified by Luo et al. (Water Research, 2025). Furthermore, it discusses reactor design innovations, including continuous-flow and cascade-type configurations, and the role of current waveforms in mitigating electrode passivation. The integration of EC with membrane bioreactors and forward osmosis is also examined, demonstrating enhanced treatment performance and fouling mitigation. Key challenges, such as energy consumption and electrode scaling, are addressed, along with future research directions. This comprehensive analysis provides a critical framework for optimizing EC systems and scaling them for industrial wastewater treatment, emphasizing the need for holistic reactor design and process integration to achieve sustainable water reuse.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2024112703
This study investigated air pollution and associated health risks in two underground parking garages located in educational and commercial districts of Nanjing, China. Concentrations of non-methane hydrocarbons (NMHC), volatile organic compounds (VOCs), carbon monoxide (CO), and nitrogen oxides (NOx) were monitored. NMHC levels ranged from 0.35–0.55 mg·L−1 (as C) in Garage A and 0.36–1.75 mg·L−1 (as C) in Garage B, peaking during evening rush hours. A total of 23 VOC species were identified, including benzene, toluene, ethylbenzene, xylenes, dichloromethane, and 1,2-dichloroethane. Benzene series compounds constituted over 90% and 70% of total VOCs (TVOCs) in Garages A and B, respectively. Daily average TVOC concentrations were 146.0 μg·m−3 (weekday) and 49.7 μg·m−3 (weekend) in Garage A, and 2398.1 μg·m−3 and 3401.6 μg·m−3 in Garage B. Maximum CO concentrations reached 10.1 mg·m−3 and 12.6 mg·m−3, exceeding the Chinese indoor standard of 10 mg·m−3 (1-h). NOx levels also exceeded standards. Non-carcinogenic hazard indices (HI) were 0.03 and 0.18, below the EPA threshold of 1. However, carcinogenic risks reached Level II and III, with primary contributors being benzene, 1,2-dichloroethane, and naphthalene in Garage A, and ethylbenzene, benzene, and 1,2-dichloroethane in Garage B. The findings indicate potential health threats to garage users, necessitating enhanced ventilation and exposure mitigation.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202509004
Acetone, a widely used solvent in the pharmaceutical industry, poses environmental and economic challenges due to its high volatility and the low concentration of acetone in water-based absorbents, which complicates recovery. This study proposes a composite absorbent comprising 1,4-butanediol (BDO), triethylene glycol, sodium citrate, and water, aiming to enhance acetone absorption capacity and enable cost-effective resource recovery. Response surface methodology optimized the absorbent composition to BDO 35%, triethylene glycol 10%, and sodium citrate 5%, achieving an acetone absorption capacity of 51.97 g·kg−1, which is 2.39 times that of pure water (21.77 g·kg−1). Density functional theory (DFT) calculations and AIM topological analysis revealed that BDO forms stronger hydrogen bonds with acetone, characterized by shorter bond lengths and higher electron density, underpinning its superior molecular recognition and absorption capability. Process simulation of absorption-regeneration cycles demonstrated that, compared to pure water, the composite absorbent reduces absorbent consumption by 36.2% and regeneration energy consumption by 41.15% while achieving effluent acetone concentrations below 100 mg·m−3. This multi-scale investigation, spanning macroscopic experiments, molecular mechanisms, and process simulation, validates the feasibility and advantages of BDO-based composite absorbents for VOC control, providing theoretical and data support for the engineering application of alcohol-based absorbents in efficient organic pollutant separation.