SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4358-y
Oxygen electrocatalysis underpins the viability of proton-exchange-membrane water electrolyzers and rechargeable Zn–air batteries, yet commercial deployment remains constrained by the sluggish kinetics of the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR), which impose overpotentials exceeding 300 mV and accelerate catalyst degradation. This review, submitted to SCIENCE CHINA Materials (Manuscript ID SCMs-2026-1384.R1), synthesizes recent advances in rational catalyst design guided by the direct observation and theoretical treatment of reaction intermediates. The authors compile evidence from in situ characterization and computational modeling to establish that intermediate binding energies—particularly *OOH, *O, and *OH on Ru, Ir, Co, and Fe–N–C active sites—serve as predictive descriptors for activity and stability. Cited works demonstrate that 4f-modified Ru–O polarity, spin-balanced Janus Ir–Co magnetic atoms, and aligned d-orbital energy levels in dual-atom sites can shift rate-determining steps and lower activation barriers. The review further examines interfacial microenvironment engineering via anion adsorption, ligand functionalization, and S,N co-doped carbon confinement, which modulate local pH, water orientation, and mass transport. Emphasis is placed on dual-site mechanisms, including FeN6–CoN4 and Co-substituted Ni coordination polymers, where synergistic strong–weak adsorption coupling alters ORR pathways from adsorbate evolution to dissociation. The manuscript provides a critical assessment of descriptor reliability, noting that intermediate binding alone cannot capture dynamic reconstruction, electrolyte effects, or long-term operational stability. By integrating in situ spectroscopy with descriptor-based design, the review offers a framework for translating mechanistic insight into durable, cost-effective oxygen electrocatalysts for industrial electrolysis and metal–air batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3698-5
The oxygen evolution reaction (OER) is a critical bottleneck in next-generation sustainable energy systems due to its sluggish kinetics. Developing cost-effective, high-efficiency electrocatalysts requires understanding the dynamic structural evolution at electrode-electrolyte interfaces under operating conditions. In situ techniques are invaluable for identifying active centers and monitoring key intermediates. This review comprehensively summarizes recent advances in cutting-edge in situ methods for characterizing OER electrocatalyst structure evolution. It provides a brief overview of active motifs and robust structures using multiple in situ correlative techniques, establishing essential structure-performance relationships and updating mechanistic understanding at atomic scale under realistic conditions. Key challenges and perspectives are highlighted to promote rational design of promising electrocatalysts for efficient oxygen-associated electrocatalysis and electrosynthesis.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3663-6
Escalating global climate change has precipitated a dramatic surge in building cooling/heating energy demands, critically undermining urban sustainability. Although dynamic thermal management technologies show potential for reducing architectural carbon footprints, prevailing active regulation systems remain constrained by energy-intensive mode-switching mechanisms and unsustainable operational costs. Here, we develop a zebra-inspired radiative modulator (ZIRM) that achieves climate-customized building thermal management through spatially partitioned integration of radiative cooling (RC) and heating (RH) functional units. The material breakthrough resides in a hybrid thin-film architecture combining a cellulose acetate/Zeolitic imidazolate framework-L (ZIF-L) porous membrane (solar reflectance ~95%, thermal emissivity ~0.88) with an MXene/ZIF-67 derived carbon-based absorption layer (solar absorption ~93%, thermal emissivity ~0.37), resolving the opto-thermal coupling limitations inherent to conventional materials. Experimental verification demonstrates that programmable regulation of the RC/RH area ratio enables broad-range temperature differential control from −4.3 to 12.1 °C during daytime operation. Building energy simulations reveal ZIRM’s annual energy consumption of 1.45×10^10 GJ, corresponding to 9.9% and 2.7% reductions compared to pure RC and RH systems, respectively. The established “configuration-environment-performance” predictive model pioneers a paradigm-shifting solution for carbon-neutral architecture, synergizing material innovation with climate-customized engineering strategies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3702-0
Construction of metal-mediated redox sites is an appealing approach to enhance photocatalytic CO2 reduction coupled with H2O oxidation. However, conventional static redox sites generally lack spatiotemporal matching during reaction processes due to the constraints of rigid structure and the linear scaling relationship of adsorbed species. Herein, an alkanolamine-Ir synergistic system was developed, where flexible monoethanolamine (MEA) molecules function as molecular ferries to selectively adsorb CO2 via carbamate formation, while adjacent Ir nanoparticles (NPs) serve as H spillover hubs that relay protons, creating spatiotemporal adaptability that synchronizes CO2 reduction and water oxidation. In addition, time-resolved in situ spectroscopy directly captures the rapid transformation of carbamate intermediates concurrent with sustained IrOOH intermediates formation. Microkinetic modeling further demonstrates that the MEA-Ir modified system (M-Ir/ACN) creates interconnected H spillover networks between Ir NPs and MEA, facilitating efficient proton transport that drives *COOH formation with a favorable thermodynamic energy. As a result, the M-Ir/ACN achieves a 20-fold increase in CO production compared to the pristine sample while maintaining high stability throughout 45 h of continuous operation. This study presents that flexible molecular ferries boost CO2 adsorption, and deciphers how flexible molecular-metal synergy directs the trafficking of CO2-derived intermediates toward highly efficient CO2 photoreduction.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3567-x
Manganese-based layered oxides are prospective cathodes for sodium-ion batteries (SIBs) due to high theoretical capacity and low cost, but the Jahn-Teller effect of Mn3+ (high-spin d4) induces irreversible phase transitions and lattice deformations. This study designs Ti-substituted P2/O3 heterostructured cathodes via an orbital-lattice synergistic modulation strategy. In situ XRD reveals that P2/O3 biphasic coupling suppresses the irreversible P2-to-O2 transition at high voltages. Synchrotron XAS shows that the d0 configuration of Ti4+ eliminates degenerate electronic states of Mn3+, mitigating Jahn-Teller distortion. The optimized P2/O3-Na0.85Mn0.95Ti0.05O2 (NMT-05) electrode delivers enhanced energy density and kinetics in half-cell and full-cell configurations paired with hard carbon anodes. This work provides guidelines for low-cost, highly stable Mn-based oxide cathodes.