SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3912-0
This erratum corrects an error in the Chinese name of co-first author Tianxiao Xiao (肖天孝) as originally published in the article 'A multi-modal smart chest patch for real-time cardiopulmonary monitoring and anomaly detection' (Sci China Mater, 2025, 68(12): 4413–4422). The corrected Chinese name is 肖天笑. The correction applies solely to the author's name and does not affect the scientific content, experimental data, or conclusions of the original paper. The authors and publisher apologize for any inconvenience caused.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202508047
Selective recovery of aluminum compounds from fly ash is a key route for its high-value utilization. This study developed a multi-stage activation process for extracting Al(OH)3 from fly ash, comprising mechanical activation, calcination activation, chemical separation, and carbonation precipitation. Fly ash was mixed with carbide slag and CaF2, then calcined; the resulting clinker was leached with Na2CO3 solution to extract Al. The CaO generated from high-temperature calcination of carbide slag facilitated the separation of Si and Al. After solid-liquid separation, CO2 was introduced into the Al-rich leachate to precipitate Al(OH)3. The process promoted the formation of Ca12Al14O32F2 and inert Ca2SiO4, achieving efficient Si-Al separation during calcination. Under optimal conditions (mechanical activation for 60 min, 4% CaF2, calcination at 1000°C for 2 h, leaching with 40 g/L Na2CO3), the Al extraction rate reached 91.8%, and the product purity was 98.9%. The alumina extraction residue exhibited porous and highly reactive characteristics, suitable for producing flame-retardant materials or high-value silicon-based products (e.g., white carbon black, molecular sieve adsorbents). The process offers a promising industrial route for fly ash valorization, with potential integration with cement production lines for synergistic CO2 capture and utilization.
Journal of Environmental Engineering Technology•2026•DOI: 10.13205/j.hjgc.202605020
To address the high CO2 emission proportion in the industrial sector, distillers' grain waste was converted into biochar for CO2 adsorption from flue gas. Raw biochar suffers from weak pore adsorption and poor selectivity at elevated temperatures. This study employed ash self-templating and particle self-assembly to create hierarchical pores and simultaneously load amine groups onto distillers' grains-derived biochar, yielding amine-functionalized hierarchical porous carbon spheres. The amine loading significantly increased, providing more CO2 adsorption sites, while retaining macroporosity (total pore volume 0.0030–0.0066 cm3/g after amine loading), which enhanced morphological stability and CO2 mass transfer. The optimal sample, 0.2PW-K-CNF-PEI, exhibited a CO2 adsorption capacity of 1.03 mmol/g at 100 °C, a CO2 diffusion coefficient of 0.0495 min−1, and a selective adsorption capacity of 44 mg/g at 80 °C. This work offers a solution for valorizing distillers' grain by-products and capturing CO2 from low-temperature flue gas.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2026012804
This study conducted online monitoring of volatile organic compounds (VOCs) at a roadside site on a main arterial road in Haikou, a tropical city, during summer 2023 (June 25–September 30). A total of 56 VOCs were measured. The mean total VOC concentration (φ(TVOCs)) was (9.05 ± 6.24) nmol·mol−1, with concentrations in the order: alkanes > alkenes > aromatic hydrocarbons > alkynes, dominated by light alkanes. Alkenes and aromatic hydrocarbons contributed significantly to atmospheric chemical reactivity, while secondary organic aerosol formation potential (SOAFP) was limited, influenced by both VOC concentrations and temperature. VOC concentrations exhibited a pronounced bimodal diurnal pattern, consistent with traffic peaks. Ratio analysis indicated a Toluene/Benzene (T/B) ratio slightly higher than typical vehicle exhaust values, and an iso-Pentane/n-Pentane (i/n) ratio suggesting fuel evaporation influence. Positive Matrix Factorization (PMF) identified four sources: gasoline/LPG vehicle exhaust (49.9%), solvent use or vehicle evaporation (26.1%), diesel vehicle exhaust (14.9%), and biogenic sources (9.1%). SOAFP was mainly contributed by solvent use/evaporation (35.7%), gasoline/LPG exhaust (34.6%), diesel exhaust (22.0%), and biogenic sources (7.7%). These findings indicate that under tropical summer high-temperature conditions, roadside VOC pollution is predominantly traffic-related, with vehicle evaporation sources non-negligible, providing insights for evaluating vehicular impacts on particulate pollution.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4029-4
Chemical sensing technology is pivotal in modern industry and daily life, with sensor performance critically reliant on nanomaterials. While sensors based on traditional nanomaterials, such as inorganic semiconductors and organic conductive polymers, have achieved commercialization, they face persistent challenges. As an emerging subclass, conductive metal-organic frameworks (c-MOFs) not only inherit the core advantages of traditional MOFs—high specific surface area, porosity, and tunable composition/structure—but also offer adjustable electrical conductivity, rendering them ideal for sensing applications. This review systematically elucidates the construction and properties of c-MOFs across microscopic crystalline and macroscopic micro-nano structural scales. Special emphasis is placed on the structural design and regulation of c-MOFs for analytical sensing, and the intrinsic structure-performance relationship is clarified to achieve higher sensitivity, selectivity, response speed, and long-term stability, as well as other performance metrics. Finally, we comprehensively summarize the typical applications of c-MOFs-based sensors, covering environmental and safety monitoring, photoelectric detection, and health monitoring and diagnosis. At the same time, the key challenges existing in this field, such as the controllable preparation of high-quality single-crystal materials, the theoretical analysis of intrinsic electrically conductive mechanisms, and the balance between macroscopic material stability and the processing performance of devices, were evaluated. The future research directions should focus on developing new ligands and metal combinations to optimize the band structure, deepening the exploration of the mechanisms of emerging physical effects such as piezoelectricity, and promoting the integration and application of materials in practical scenarios such as flexible electronics and wearable devices.