SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4452-8
Europium(III) complexes offer intrinsically narrow red emission (full-width at half-maximum < 5 nm) that is highly desirable for ultrahigh-definition displays, yet their electroluminescence performance is severely limited by unbalanced charge transport and inefficient energy transfer. This work reports a molecular design strategy that modulates both energy transfer and charge transport in Eu³⁺ OLEDs. The synthesized complex, Cz-Eu, incorporates a carbazole-functionalized ancillary ligand to facilitate host–guest energy transfer and hole transport. The single-crystal structure was deposited (CIF: Cz-Eu-cif.cif) and subjected to PLATON validation, which flagged 3 type-1 alerts (CIF construction/syntax errors), 8 type-2 alerts (possible structural model deficiencies), 12 type-3 alerts (low structure quality), and 4 type-4 alerts (improvement suggestions), with no duplication detected. These crystallographic alerts indicate that the reported structure requires further refinement before it can be considered reliable. Nevertheless, the device metrics demonstrate a promising route: the optimized OLED achieves efficient ultranarrow-band red emission, with the potential for high color purity and reduced power consumption. The findings underscore the critical role of ligand engineering in balancing charge fluxes and fostering efficient energy transfer, providing a viable pathway for next-generation red emitters. However, the structural ambiguities highlighted by the PLATON analysis warrant cautious interpretation of the structure–property relationships and suggest that additional crystallographic and device stability studies are necessary to substantiate the claimed performance.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(25)61036-5
Large graphene oxide (LGO) sheets offer significant advantages over smaller ones in various applications, yet their production via Hummers-type oxidation of large natural graphite flakes remains challenging due to difficulties in achieving full oxidation and avoiding fragmentation. This study provides the first direct evidence that large graphite flakes (up to 1 mm) can be completely oxidized without fragmentation under static conditions, as revealed by in-situ monitoring. The oxidation process is governed by diffusion of the oxidizer between layers, described by Fick's law, where a high oxidizer concentration gradient increases the diffusion rate. By minimizing the amount of concentrated H2SO4 solvent, we achieved a semi-solid state that elevates oxidizer concentration, facilitating Mn(VII) diffusion and enabling complete oxidation of gram-scale large flakes with significantly reduced reagent consumption. Reaction temperature was optimized to balance graphite oxidation and Mn(VII) self-decomposition. Using this approach, 200-, 100-, and 50-mesh natural graphite were fully oxidized with reduced H2SO4 and KMnO4 usage. After exfoliation, LGO with average lateral sizes of 27.3, 58.7, and 116.2 μm were obtained, respectively, with 100% conversion and yield over 165%. This work not only provides a scalable, cost-effective strategy for LGO production but also advances the fundamental understanding of Hummers-type oxidation.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3851-3
Aqueous zinc-ion batteries (AZIBs) face critical challenges from zinc anode instability, including corrosion, hydrogen evolution reaction (HER), parasitic byproduct formation, and uncontrolled dendrite growth. To address these issues, we developed a multifunctional cerium-based metal-organic framework (Ce-MOF) coating for zinc anodes. The coating features an ordered porous structure and inherent properties that mitigate HER, suppress side reactions, and inhibit dendrite formation. Symmetric cells using Ce-MOF/Zn demonstrated exceptional cycling stability for over 2060 h at 0.5 mA cm−2 with a low hysteresis polarization of 26 mV. In full cells with an I2@AC cathode, the Ce-MOF/Zn||I2@AC achieved outstanding cycling stability of 28,550 cycles at 5 A g−1, with 91% capacity retention (109.6 mAh g−1). Through integrated characterization employing in-situ optical microscopy, ex-situ XRD, SEM, and DFT calculations, we elucidated the multifunctional mechanism: the Ce-MOF coating facilitates preferential (002)-oriented Zn deposition to suppress dendrites, reduces Zn2+ desolvation energy to enhance deposition kinetics, and modulates interfacial chemistry to mitigate HER and corrosion. This work establishes Ce-MOF coatings as a simple yet powerful strategy for developing high-performance zinc anodes, providing critical insights for advancing practical AZIB technologies.