SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3691-9
Near-infrared (NIR) spectroscopy has significantly advanced NIR light sources, yet creating NIR emitters with optimal luminescence properties, high thermal stability, and adjustable emission peaks remains a critical challenge for future smart NIR devices. Here, we introduce a chemical unit cosubstitution strategy by incorporating Ca2+ and Sn4+ ions into the garnet structure. Through this approach, Y3−yCayGa4.95−ySnyO12:0.05Cr3+ (y = 0–1) phosphors were developed by modulating the A&C ligands, resulting in emission centers ranging from 708 to 768 nm. The modified local environment of Cr3+ accounts for the increased light intensity (2.71 times) and broadening observed. Furthermore, this study investigated the impact of varying Cr3+ concentrations (Y2.6Ca0.4Ga4.6−xSn0.4O12:xCr3+) on the production of high-performance phosphors. Compared with Y3Ga4.93O12:0.07Cr3+, the optimized phosphor exhibited exceptional external quantum efficiency (EQE = 34.96%). The luminescence enhancement is attributed to an increase in radiative transitions caused by octahedral Jahn-Teller distortion, whereas the notable thermal stability (91.3% at 423 K) is attributed to the presence of weak electron-phonon coupling (EPC) and oxygen vacancy (OV) defects. Finally, by combining it with a 450 nm blue LED chip, we constructed a near-infrared phosphor-converted LED (NIR pc-LED) device with superior electroluminescence efficiency (18.8% @ 100 mA), increasing the ultralow quenching rate (< 5% intensity loss after 30 days of operation) and demonstrating remarkable performance in plant lighting applications.
New Carbon Materials•2026•DOI: 10.1016/S1872-5805(26)61106-7
Hard carbon anodes for sodium-ion batteries suffer from limited capacity, low initial Coulombic efficiency, and poor long-term cycling stability. To address these issues, we report a dual-stabilization strategy that combines micropore confinement and chemical bonding to control sulfur species in coal-derived hard carbon. Bituminous coal, with its naturally condensed aromatic framework, serves as the carbon precursor. A two-step thermal process first constructs a microporous carbon framework, followed by gas-phase sulfidation to introduce sulfur. The sulfur is confined within micropores and forms stable covalent C–S bonds with the carbon matrix, providing synergistic physical–chemical stabilization. This suppresses sulfur migration, prevents interfacial side reactions, and introduces additional redox-active sites. The optimized sample (HC-10) delivers a high reversible capacity of 450 mAh/g after 800 cycles at a current density of 1 A/g, with excellent rate capability and cycling stability. Mechanistic analysis reveals that the stabilized sulfur species reversibly participate in sodium-ion storage and improve interfacial kinetics. This work provides an effective strategy for stabilizing sulfur in coal-derived carbon materials and offers insights into the design of high-performance anodes for sodium-ion batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3741-3
Functional motifs are essential microscopic units that govern the second harmonic generation (SHG) response in nonlinear optical (NLO) materials. While nonmetal-centered motifs have been extensively studied, metal-centered motifs with outstanding comprehensive performance remain scarce. Here, we report the successful synthesis of the first seven-coordinated indium oxy-chloride and oxy-bromide polyhedra, InO6X (X = Cl, Br), by leveraging the chelating and structure-directing properties of SeO3 groups. The InO6Br polyhedra exhibit the highest polarization anisotropy and hyperpolarizability among all reported indium oxy-chloride and oxy-bromide groups. Consequently, the first non-centrosymmetric halogenated indium selenites, In2(OH)(SeO3)2Cl (ISOC) and In2(OH)(SeO3)2Br (ISOB), were obtained. Both compounds demonstrate strong SHG intensity exceeding six times that of KDP (potassium dihydrogen phosphate) and wide band gaps greater than 4.0 eV, a combination rarely observed in inorganic selenites. This work presents a viable strategy for developing new NLO functional motifs and offers valuable insights for designing novel SHG materials with enhanced performance.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025031304
The Qingling River, a representative silicate rock catchment in the upper Yangtze Basin, is vital for agricultural productivity in central Yunnan. To investigate its hydrochemical characteristics, river water samples were systematically collected during both dry and wet seasons. Employing hydrochemical diagrams, statistical analysis, and absolute principal component score-multiple linear regression (APCS-MLR) modeling, we identified influencing factors and their contributions to water chemistry and evaluated irrigation suitability. Results showed that pH ranged from 7.36 to 9.18 in dry season and 7.12 to 8.92 in wet season, with total dissolved solids (TDS) varying between 119–2684 mg·L−1 and 125–2342 mg·L−1, respectively. Dominant cations were Ca2+ and Na+, while anions were primarily SO4^2− and HCO3^− in both seasons; notably, SO4^2− concentrations significantly exceeded the Yangtze River Basin’s average. Hydrochemical types varied seasonally: HCO3·SO4-Ca·Mg and HCO3·SO4-Ca dominated in dry season, whereas HCO3·SO4-Ca·Na, HCO3·SO4-Ca·Mg, and HCO3-Ca prevailed in wet season. The river water was affected by five factors: sulfuric acid-dominated water-rock interactions, carbonic acid-dominated water-rock interactions, domestic sewage discharge, agricultural non-point source pollution, and unknown sources. Contribution rates were 47.90%, 24.80%, 16.98%, 2.40%, and 7.92% in dry season, and 28.23%, 28.94%, 27.48%, 2.02%, and 13.34% in wet season, respectively. Water-rock interactions emerged as the primary control on hydrochemistry. While most samples were suitable for irrigation, a few exhibited high salinity, warranting cautious use. This study provides scientific support for irrigation water resource management and safe utilization in the Qingling River Basin.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4181-6
Green hydrogen production via electrocatalytic water splitting is pivotal for sustainable energy, yet the high cost and scarcity of platinum (Pt) catalysts impede large-scale adoption. Ruthenium (Ru)-based materials emerge as promising alternatives, but their performance requires enhancement. Two-dimensional transition metal dichalcogenides (TMDs), particularly ReS2, offer intrinsic 1T' phase with good conductivity and stability, yet suffer from inert surfaces limiting water adsorption. Here, we report a heterostructure comprising Ru nanoclusters anchored on ReS2 nanosheets (Ru/ReS2) to modulate electronic structure via d-p coupling. This design enhances water dissociation kinetics and optimizes hydrogen adsorption free energy (ΔG_H*). The Ru/ReS2 catalyst exhibits superior hydrogen evolution reaction (HER) activity in acidic media, achieving an overpotential of 47 mV at 10 mA cm−2 and a Tafel slope of 38 mV dec−1, outperforming commercial Pt/C (overpotential 54 mV, Tafel slope 45 mV dec−1). Notably, it demonstrates exceptional stability, with negligible degradation after 10,000 cyclic voltammetry cycles, contrasting with Pt/C's 54 mV overpotential increase. Density functional theory calculations reveal that d-p coupling between Ru and ReS2 optimizes the electronic structure, facilitating water adsorption and dissociation. This work provides a rational strategy for designing efficient, durable, and cost-effective HER electrocatalysts for green hydrogen production.