SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4237-x
Silicon-based (Si-based) anodes are core candidates for next-generation high-energy solid-state batteries (SSBs) due to their high theoretical capacity (~4200 mAh g−1). However, their practical application is constrained by the 'size effect', which influences mechanical integrity and electrochemical performance. This review systematically examines the failure mechanisms of nano-silicon (nSi) and micro-silicon (mSi) anodes when paired with sulfide and organic-inorganic composite solid-state electrolytes (SSEs). Key functional parameters of these SSEs are discussed, along with strategies to mitigate interfacial impedance and accommodate volume changes. Recent progress in structural and interface modifications is highlighted, including the use of hard-carbon-stabilized Li–Si anodes (achieving stable cycling) and pressure-free operation. The review identifies core challenges, such as achieving intimate solid–solid contact and managing mechanical stress, and outlines future directions for 'size effect' regulation to accelerate commercialization of high-energy Si-based SSBs.
Chinese Journal of Environmental Engineering•2026•DOI: 10.12030/j.cjee.202511025
Under the national carbon peak and carbon neutrality goals, carbon reduction in municipal wastewater treatment plants (WWTPs) has been largely overlooked, yet accurate accounting is the first step toward mitigation. This study establishes a carbon emission accounting method for a municipal WWTP in Lanzhou, covering the operation and maintenance phase, to identify key emission sources and propose feasible reduction pathways. The results show that the total annual carbon emission in 2023 was 61,399.80 t CO2-eq, with an emission intensity of 0.71 kg CO2-eq per tonne of wastewater treated. Monthly emissions were relatively stable, with a coefficient of variation of 3.46%. Direct emissions accounted for 47.47% of the total, with N2O being the dominant contributor (61.89% of direct emissions), followed by CO2 (30.88%) and CH4 (7.23%). Indirect emissions accounted for 52.53%, dominated by electricity consumption (95.15% of indirect emissions). Pearson correlation analysis revealed that direct carbon emissions per tonne were significantly correlated with influent BOD5 concentration, influent TN concentration, BOD5 removal rate, and TN removal rate (P < 0.01). Sensitivity analysis identified sewer retention time, fossil carbon fraction in influent, and solids retention time as the most influential parameters, with sensitivity coefficients of 0.42, 0.35, and 0.28, respectively. Considering uncertainties in emission factors and monitoring errors, the 95% confidence interval for annual total emissions was 55,200–67,600 t CO2-eq, corresponding to an emission intensity of 0.64–0.79 kg CO2-eq per tonne. Recommendations focus on three synergistic reduction strategies: reducing source emissions, lowering energy consumption, and enhancing carbon compensation.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025050601
China's iron and steel industry has undergone comprehensive ultra-low emission transformation, meeting stringent limits for conventional pollutants, yet the fate of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) remains unclear. This study combined field sampling and literature review to analyze PCDD/Fs emission characteristics from sintering, converter, and electric arc furnace processes before and after transformation, and calculated national emissions for 2022. Results demonstrate that ultra-low emission transformation effectively reduces PCDD/Fs emissions. Specifically, emission concentrations decreased by 86.5%, 95.1%, and 66.9% for sintering, converter, and electric arc furnace, respectively, with corresponding emission factors dropping to 0.11, 0.009, and 0.014 μg I-TEQ·t−1 product. Under the transformation scenario, total national emissions were 104 g I-TEQ (uncertainty ±26 g), a 94.9% reduction from the unreformed scenario (2049 ± 763 g I-TEQ). Congener profiles shifted from high-chlorinated dominance to low-chlorinated dominance, while toxicity equivalent distribution remained dominated by 2,3,4,7,8-PeCDF (35%–56%). This study quantifies the co-benefit of PCDD/Fs reduction, providing critical data for updating China's emission inventory and formulating toxicity-oriented control policies.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4017-y
Lattice distortion via entropy engineering can significantly optimize thermoelectric performance by intensifying phonon scattering. However, excessive lattice distortion in high-entropy materials inevitably hinders carrier transport, limiting the wide-temperature average ZT (ZTave). To enhance the wide-temperature thermoelectric performance of low-cost PbS-based compounds, this work introduces moderate lattice distortion by controlling entropy around 1.0R (R is the gas constant) to balance phonon and carrier transport, alleviating restrictions on carrier mobility. Substantial Se and Te alloying in PbS induces rock-salt lattice distortion, effectively impeding phonon propagation, thus suppressing lattice thermal conductivity (κlat) from 2.41 W m−1 K−1 in PbS to 0.66 W m−1 K−1 in PbS0.5Se0.35Te0.15 at 300 K. Additionally, Cu interstitials are introduced into the lattice-distorted PbS0.5Se0.35Te0.15 to further optimize carrier density and weighted carrier mobility (μW), leading to significant improvement in μW/κlat parameter at 300–773 K. Finally, a room-temperature ZT of 0.53 and a maximum ZT of 1.44 are obtained in PbS0.5Se0.35Te0.15-1%Cu sample, contributing to an impressive ZTave of 1.08 at 300–773 K and a maximum power generation efficiency (ηmax) of 7.5%. The results outperform previously reported cost-effective PbS-based compounds and highlight the importance of lattice distortion regulation in enhancing wide-temperature thermoelectric performance.