SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4349-9
Sodium metal batteries are promising for large-scale energy storage due to sodium's abundance and low cost, but their commercialization is hindered by dendrite growth and low utilization of sodium metal anodes. Here, we report a yolk-shell structure with gold nanoparticles (Au NPs) confined in hollow carbon nanospheres (Au@HCN) as a robust seeding/hosting interphase. The encapsulation isolates Au NPs from direct electrolyte contact, mitigating parasitic reactions, while the void space accommodates volume changes during alloying. Notably, electrochemical testing reveals that Au NPs undergo alloying-induced amorphization upon sodiation, forming a Na-Au amorphous alloy that enhances sodiophilicity and ensures uniform Na nucleation. This amorphous phase, confirmed by ex situ X-ray absorption spectroscopy and transmission electron microscopy, reduces nucleation overpotential and promotes dendrite-free deposition. The Au@HCN electrode achieves a high Coulombic efficiency of 99.8% over 500 cycles at 1 mA cm−2 and a long cycle life of over 2000 hours at 0.5 mA cm−2 in symmetric cells. Full cells paired with Na3V2(PO4)3 cathodes deliver a specific capacity of 105 mAh g−1 with 92% retention after 500 cycles. This work provides a rational design for stable sodium metal anodes through encapsulation and alloying-induced amorphization, offering a pathway for practical sodium metal batteries.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3708-y
Polar two-dimensional (2D) perovskites, with their excellent semiconductor properties, intrinsic anisotropy, and bulk photovoltaic effect, have emerged as promising candidates for self-driven polarization-sensitive photodetectors. However, these self-driven polarized detectors typically require fabrication along the spontaneous polarization direction to maintain device operation in the self-driven mode, which imposes additional limitations. Herein, we demonstrate multidirectional self-driven polarization-sensitive photodetection by constructing 2D perovskite-based asymmetric contact devices, Ag/2D perovskite/C. The built-in electric field, originating from the difference in work functions, acts as the driving force for the separation and transport of photogenerated carriers. Notably, this approach does not necessitate a specific direction, thereby enabling multidirectional self-driven photodetection. Under excitation by linearly polarized light, our devices exhibit impressive polarization-sensitive discrimination in multiple directions, achieving polarization ratios of 3.3 and 3.1 along the a and b-axes, respectively. Our work enriches the approaches enabling self-driven polarization-sensitive photodetection, free from the previous limitations.
Environmental Chemistry•2026•DOI: 10.7524/j.issn.0254-6108.2025041405
Microplastics, as a class of emerging environmental contaminants, pose global concerns due to their potential ecological and human health impacts. Accurate identification and quantification of microplastics in environmental matrices are essential for assessing their environmental fate and ecological risks. Pyrolysis-based analytical methods, which decompose macromolecules into smaller fragments followed by gas chromatographic separation and mass spectrometric detection, offer high sensitivity and accuracy, making them significant for microplastic analysis. Despite these advantages, their application remains nascent, with limited comprehensive understanding of their applicability across diverse environmental media. This review systematically compares three pyrolysis-based techniques—pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS), thermogravimetry-differential scanning calorimetry (TGA-DSC), and thermal extraction-desorption gas chromatography-mass spectrometry (TED-GC-MS)—for microplastic detection in various matrices. The effectiveness of each method is evaluated in terms of sensitivity, selectivity, and matrix compatibility. Critical challenges, including lack of standardized protocols, complex sample pretreatment requirements, and limitations in quantifying mixtures, are identified. Future research directions emphasize the need for standardization, optimization of pretreatment for complex matrices, and integration with complementary techniques such as FTIR and Raman spectroscopy to enhance comprehensive microplastic characterization. This review provides a critical framework for selecting appropriate pyrolysis-based methods and highlights areas requiring further methodological development.