SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3470-6
Inkjet printing of two-dimensional transition metal chalcogenides (TMDs) is promising for low-cost, large-scale flexible electronics, yet challenges persist due to poor crystallinity and toxic solvents. Here, we report a green ink formulation using zwitterionic cocamidopropyl betaine (CAB) as a dispersant and surfactant for liquid-phase exfoliation of single-crystalline TMDs in water and isopropanol (IPA). The dispersions contain no additives or binders, enabling direct production of stable (over one month) and concentrated (2 mg/mL) inks for MoS2, MoTe2, WS2, WSe2, and WTe2. Fully-printed MoSe2/CAB humidity sensors exhibit superior sensitivity (ΔI/I0 = 468.1) and rapid response/recovery times (27 s/0.42 s) under bending. Inkjet-printed WTe2/CAB pads on 6-μm-thick substrates demonstrate exceptional mechanical stability, with resistance variations of 1.4% under single bending and 2% after 1,000 cycles, and acquire high-quality electrocardiogram (ECG) and electromyography (EMG) signals. This strategy enables scalable fabrication of TMD-based flexible electronics, advancing industrial integration.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3894-9
Photocatalytic production of hydrogen peroxide (H2O2) using water and O2 offers an economical, environmentally friendly, and sustainable route for H2O2 synthesis. However, current photocatalytic systems suffer from poor charge carrier transport, narrow light absorption, and insufficient active sites, leading to unsatisfactory H2O2 production efficiency. In this study, a CoS/ZnIn2S4 (ZIS) composite was constructed by in-situ growing CoS nanoclusters on ZIS via a solvothermal method for photocatalytic H2O2 production. The integration of CoS with ZIS broadened the light absorption spectrum. The optimized CoS/ZIS-3 composite exhibited an exceptional H2O2 production rate of 2693.39 μmol g−1 h−1 under visible light in isopropanol, surpassing pristine ZIS and CoS by factors of 6.54 and 18.08, respectively. The S-scheme heterojunction and built-in electric field synergistically enhanced the separation and transportation of photogenerated charge carriers, thereby improving photocatalytic efficiency. The H2O2 synthesis mechanism involves dual-channel oxygen reduction and water oxidation reactions mediated by CoS/ZIS. The produced H2O2 effectively degraded organic pollutants and inhibited the growth of E. coli. This study presents a promising green strategy for enhancing ZIS-based photocatalysts through constructing S-scheme heterojunctions for efficient H2O2 synthesis.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3962-y
Photochromic Förster resonance energy transfer (pc-FRET)-based subnanometric polymersomes with accurate color control offer a transformative yet challenging tactic for advanced and custom-tailored information encryption. Herein, various amphiphilic alternating pyrene/azobenzene-containing copolymers were polymerized using one-pot Ugi four-component polycondensation. Subsequent self-assembly was performed to produce highly-integrated monolayer subnanometric polymersomes (MSNPSs) and their composites, with diameters of around ~250 nm and vesicular thicknesses of approximately ~12.0 Å. J-aggregated monolayer chain-folding mechanism was accountable for the donor-acceptor-donor stacking manner within the vesicular membrane, beneficial to achieve highly efficient energy transfer. The trans-to-cis photoisomerization of azobenzenes rendered MSNPSs and their composites with photo-triggered structural transitions in diameter and vesicular thickness. Benefitting from considerable spectral overlap between cis-azobenzene and pyrene, MSNPSs and their composites were capable of photo-controllable non-invasive pc-FRET performance with a wide Stokes shift (~320 nm). The accurate color variation from blue to red highly depended upon precise modulation of both irradiation duration and precursor-fixed donor/acceptor ratios. The proof-of-concept individually multichromatic 2D QR code was attained using photochromic MSNPSs and their composites in patterning lithography, displaying a multimodal decryption and favorable repeatability for high-level and personalized information protection. Our work paves a prospective avenue to meticulously craft stimuli-chromatic polymersomes for the potential of advanced information encryption.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-4129-y
Therapeutic biosynthesis is a promising strategy for precision cancer therapy, yet achieving controlled synthesis of abiotic materials within tumors remains challenging. Here, we report a “dual lock-and-key” system for tumor-specific intracellular synthesis. The precursor, termed “dual-lock,” is activated by two endogenously overexpressed enzymes—azoreductase (AzoR) and nitroreductase (NTR)—acting as “dual keys” in target cancer cells. This activation triggers a condensation reaction that produces fibrous mesh covalent organic polymers (Fm-COPs) in situ. Synthesized Fm-COPs effectively disrupt the cytoskeleton, inhibiting cell migration and invasion while inducing apoptosis. In vivo studies demonstrate that this strategy achieves specific tumor enrichment and deep penetration, leading to significant tumor growth inhibition (tumor inhibition rate >70%) without systemic toxicity, as evidenced by stable body weights and normal histopathology. The dual enzyme-responsive mechanism ensures high selectivity, and the small-molecule precursors facilitate efficient tumor penetration. This work presents a next-generation approach for high-precision cancer therapy, offering a biocompatible and autonomous strategy for intracellular synthesis.
SCIENCE CHINA Materials•2025•DOI: 10.1007/s40843-025-3601-6
Lithium-sulfur (Li-S) batteries face significant challenges due to the environmental sensitivity, dendrite growth and polysulfide-induced side reactions of lithium metal anodes (LMAs), which compromise their safety and cycle life. To address these issues, we develop a composite protective layer comprising layer-by-layer assembled graphene oxide (GO) films coated with 1H,1H,2H,2H-perfluorodecyl trichlorosilane (FDTS). The lithium-reduced GO framework establishes uniform ion-conducting channels that homogenize Li-ion flux, enabling uniform deposition and suppressing dendrite formation. At the same time, the hydrophobic organic coating serves as a robust barrier against water, air and lithium polysulfides (LiPSs), enabling the environmental and electrochemical stability of LMAs. As a result, the protected LMAs maintain exceptional stability upon direct contact with water and exposure in humid air (relative humidity 35%). When integrated into Li-S batteries with high sulfur loadings (4.5 mg cm−2), the protected LMAs enable a capacity retention of 61.1% over 300 cycles, showing improved cycling performance. This work provides a scalable approach to stabilizing LMAs for practical Li-S batteries.