SinoGreenTech Academic Portal
CY
Verified CAS / Academic Author2 Decoded Studies

Prof. CAI Yan'an

Qingdao University of Technology

Research Publications & English Decoded Briefs

Showing 2 publications
Journal of Environmental Engineering Technology2026DOI: 10.13205/j.hjgc.202604013

Enhanced Treatment of Reclaimed Water Using Functional Manganese-Sand Media in Constructed Wetlands

Reclaimed water serves as an alternative water source for replenishing natural water bodies, yet residual pollutants pose ecological risks. A pilot-scale hybrid vertical flow constructed wetland filled with manganese ore sand, quartz sand, and cobblestones was operated for approximately 140 days to assess nutrient and organic matter removal, ecotoxicity, and the suitability of manganese sand as a functional medium. Influent concentrations were up to 0.4 mg/L ammonia, 0.2 mg/L phosphate, 8 mg/L nitrate, and 30 mg/L COD. After 2–3 months of operation, ammonia and phosphate removal efficiencies exceeded 90% and 80%, respectively. Average reductions for nitrate and COD were 0.67 mg/L and 4.2 mg/L. Manganese sand enhanced organic decomposition, reducing maximum 3D fluorescence intensity by 26%, humic substances by 48%, UV254 by 38%, and achieving 70.8% removal of four target antibiotics. Purified water exhibited no significant genotoxicity, with micronucleus rates approaching tap water levels, and non-concentrated samples showed no acute biotoxicity. However, concentrated samples displayed acute toxicity, suggesting different causative pollutants for genotoxicity and acute toxicity. The study supports manganese sand as an effective medium for improving reclaimed water quality and controlling ecological risks.

SCIENCE CHINA Materials2026DOI: 10.1007/s40843-026-4072-3

Record Efficiency of 20.01% in HTM-Free Carbon-Based CsPbI3 Perovskite Solar Cells Achieved by TEPM Multifunctional Additive

All-inorganic, hole-transport-material-free (HTM-free), carbon-based perovskite solar cells (C-PSCs) have attracted significant attention due to their exceptional stability and low cost. However, their performance and commercial potential are constrained by poor interfacial contact, insufficient crystallinity, and energy level misalignment. In this work, we address these challenges via a molecular engineering strategy by introducing tetrakis(4-ethynylphenyl)methane (TEPM) as a multifunctional additive. The alkynyl moiety (C≡C) in TEPM coordinates with Pb2+ ions in perovskite precursors, synergistically slowing crystallization kinetics to regulate crystal growth and passivate deep-level defects. Consequently, CsPbI3 films exhibit larger grain sizes, improved crystallinity, and lower defect densities. Devices modified with TEPM achieved a record power conversion efficiency (PCE) of 20.01% (certified 19.58%). Additionally, unencapsulated devices retained 87.6% of their initial efficiency after 1080 h under ambient conditions (25 °C, 30% relative humidity), and maintained 94.0% of their initial efficiency after 730 h of continuous AM 1.5G illumination in air. This work sets a new efficiency benchmark for inorganic HTM-free C-PSCs and provides a versatile molecular engineering strategy for developing high-performance, stable perovskite photovoltaics.