SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4304-5
Comprehensive assessment of rehabilitation efficiency is essential for designing appropriate training programs for better musculoskeletal functional recovery. Existing contact-receptor-dependent rehabilitation assessment systems mostly focus on assessing the restoration of muscle function by evaluating grip strength or joint flexion angle; however, parameters reflecting neuromuscular synergistic function are always overlooked. Herein, we develop an ionoelastomer-based soft artificial electroreceptor (SAER) that integrates tele-perception and tactile sensation to track the rehabilitation process, collecting signals related to approaching speed and grip strength sequentially. The SAER uses polyurethane ionoelastomer incorporated with quasi-solid conductive salt as the electric field receptor, and is integrated on a rehabilitation-training ball after assembly to establish an untethered detection device; this enables the remote capture of hand approaching parameter within a 9 cm range, followed by the quantification of grip strength when contacting and grasping. Furthermore, a data-driven assessment system is established by integrating machine learning, which accurately classifies rehabilitation efficiency into six levels; it supports for rehabilitation evaluation and training programs adjustment. Overall, the SAER-based rehabilitation management system establishes a paradigm that synergistically evaluating parameters corresponding to neuromuscular functional restoration and holds strong potential for home-based active rehabilitation for minimizing dependence on frequent clinical supervision.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4441-7
Early detection of kidney injury remains difficult because routine clinical indicators often lag behind tissue damage. Here we report uNP-CH1055, an ultrasmall renal-clearable NIR-II fluorescent nanoprobe for non-invasive imaging of kidney injury in vivo. uNP-CH1055 formed stable nanoparticles with a hydrodynamic diameter of 3.3 nm, showed good photostability, enabled low-background imaging under a 1200 nm long-pass filter, and underwent rapid renal clearance after intravenous administration. It also exhibited favorable biocompatibility in both cellular and animal studies. In three mechanistically distinct models of renal injury, cisplatin-induced acute kidney injury, ischemia–reperfusion injury and unilateral ureteral obstruction, renal fluorescence increased with injury severity and closely paralleled biochemical and histological indicators, including blood urea nitrogen, serum creatinine, KIM-1 and TUNEL-based readouts. These results identify uNP-CH1055 as a renal-clearable NIR-II probe for early and quantitative assessment of kidney injury across different pathological settings.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3539-5
MXene-based layered films are promising for electromagnetic interference (EMI) shielding, yet achieving highly ordered structures in scalable production remains challenging. Here, we report a facile centrifugal casting method for fabricating MXene/polyvinyl alcohol (MXene/PVA) films with highly oriented and compact layered structures. During centrifugal casting, the viscous fluid experiences strong shear and centrifugal forces along tangential and normal directions, respectively, inducing compact and oriented arrangement of MXene nanosheets. Consequently, the Herman's orientation factor increases from 0.681 to 0.794 as rotation rate rises from 0 to 4000 r/min. Accordingly, tensile strength and toughness improve from 55.2 to 191.1 MPa and from ~0.8 to 2.5 MJ/m³, respectively. The highly oriented and compact layered structure with ultrathin thickness (~8 μm) enables a high absolute electromagnetic shielding effectiveness (SSE/t) of 21029 dB cm²/g. Moreover, increased orientation reduces infrared emissivity to 0.248, endowing the film with excellent thermal camouflage capability. This work presents an effective strategy for constructing high-performance MXene-based layered films.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-025-3929-4
Hydrogels are extensively utilized in biomedical fields such as drug delivery, tissue engineering, and wound dressings due to their excellent biocompatibility, high water content, and tunable physicochemical properties. However, conventional hydrogels often undergo uncontrolled swelling in physiological environments, leading to mechanical degradation, structural destabilization, and functional failure, which severely restricts their long-term applicability. Recent advances have focused on developing anti-swelling hydrogels with equilibrium swelling ratios typically below 150%, achieved through strategies including the introduction of hydrophobic interactions, enhancement of cross-linking density, and incorporation of nanocomposite structures. These approaches significantly improve dimensional stability and mechanical integrity under physiological conditions. This review systematically summarizes the common preparation strategies for anti-swelling hydrogels and highlights their latest progress in biomedical applications, including wound dressings, tissue adhesives, and implantable devices. The advantages and future directions, such as smart responsiveness and multifunctional integration, are critically discussed. The review aims to provide theoretical guidance and technical references for the development of next-generation high-performance medical hydrogel materials.
SCIENCE CHINA Materials•2026•DOI: 10.1007/s40843-026-4124-x
Aerogel fibers, featuring distinct porous architecture and fiber flexibility, have emerged as leading materials for personal thermal protection; however, complex drying processes and singular thermal insulation mechanisms limit their use in complex environments. Here, aramid nanofiber/carbon nanotube (ANF/CNT) aerogel fibers integrating passive thermal insulation and active solar heating were fabricated via wet-spinning and ambient-pressure drying (APD). The incorporation of CNT and Ca2+ generates abundant physical and chemical crosslinking points, strengthening the nanofiber network skeleton and reducing structural collapse during APD to only 8.9% shrinkage. The resulting ANF/CNT aerogel textiles exhibit low thermal conductivity of 33.8–40.4 mW/(m K) and thermal insulation capability from −196 to 400 °C. The photothermal effect of CNT enables active solar heating, effectively supplementing passive insulation and allowing survival in extremely cold environments. In real tests, the synergistic effect improved skin temperature by up to 5.9 °C, significantly higher than 1.6 °C from passive insulation alone. These ANF/CNT aerogel fibers combine flexibility, mechanical strength, and flame retardancy, demonstrating promising potential for smart, controllable personal thermal management applications.